Home > Sony > Home Theater System > Sony Dav Sb100 Operating Instructions

Sony Dav Sb100 Operating Instructions

Here you can view all the pages of manual Sony Dav Sb100 Operating Instructions. The Sony manuals for Home Theater System are available online for free. You can easily download all the documents as PDF.

Page 31

OPERATION
31
Radio Operation
Presetting the Radio stations
You can preset 30 stations for FM and AM (MW). Before
tuning, make sure that you have turned down the vol-
ume.
1 1
Press TUNER/BAND on the remote control until
FM or AM (MW) appears in the display window.
2 2
And then every time you press TUNER BAND,
FM and AM (MW) changes alternately.
3 3
Press and hold TUNING - or + on the remote 
control for about two seconds until the 
frequency indication starts to change, then 
release.
Scanning stops when...

Page 32

32
Radio Operation (Continued)
RDS Operation
This unit is equipped with RDS (Radio Data System),
which brings a wide range of information to FM radio.
Now in use in many countries, RDS is a system for
transmitting station call signs or network information, a
description of station programme type text message
about the station or specifics of musical selection and
the correct time.
RDS Tuning
When a FM station is tuned in and it contains RDS data,
the unit will automatically display the station’s name in...

Page 33

OPERATION
33
Controlling the TV with the Supplied Remote
You can control the sound level, input source, and
power switch of your TV with the supplied remote.Controlling the TV
You can control your TV using the buttons below.
By pressing You can
TV @ / 1 Turn the TV on or off.
TV/VIDEO Switch the TV’s input source 
between the TV and other input
sources.
TV CH +/- Scans up or down through 
memorized channels.
TV VOL +/- Adjust the volume of the TV.
Using the number buttons for controlling the
TV 
When you...

Page 34

34
Using the SONY TV DIRECT Function
SONY TV DIRECT allows you to turn on your SONY TV
and this system, change the system mode to “CD/DVD,”
and then switch the TV’s input source you set with one
button push.By pressing Number  TV’s input source
TV/VIDEO 0 No input source
(Default)
1 VIDEO1
2 VIDEO2
3 VIDEO3
4 VIDEO4
5 VIDEO5
6 VIDEO6
7 COMPONENT 1
INPUT
8 COMPONENT 2
INPUT
2
Press and hold TV CH + while entering the code
for transmit time (see table below) using the
number buttons.
The transmit time from...

Page 35

REFERENCE
35
Language Code List
Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle”and/or “Disc Menu”
(See page 19).
Code Language 
6566 Abkhazian
6565 Afar
6570 Afrikaans
8381 Albanian
6577 Ameharic
6582 Arabic
7289 Armenian
6583 Assamese
6588 Aymara
6590 Azerbaijani
6665 Bashkir
6985 Basque
6678 Bengali; Bangla
6890 Bhutani
6672 Bihari
6682 Breton
6671 Bulgarian
7789 Burmese
6669 Byelorussian
7577 Cambodian
6765 Catalan
9072 Chinese
6779 Corsican
7282 Croatian
6783...

Page 36

36
Code AreaAD AndorraAE United Arab EmiratesAF AfghanistanAG Antigua and BarbudaAI AnguillaAL AlbaniaAM ArmeniaAN Netherlands AntillesAO AngolaAQ AntarcticaAR ArgentinaAS American SamoaAT AustriaAU AustraliaAW ArubaAZ AzerbaidjanBA Bosnia-HerzegovinaBB BarbadosBD BangladeshBE BelgiumBF Burkina FasoBG BulgariaBH BahrainBI BurundiBJ BeninBM BermudaBN Brunei DarussalamBO BoliviaBR BrazilBS BahamasBT BhutanBV Bouvet IslandBW BotswanaBY BelarusBZ BelizeCA CanadaCC Cocos (Keeling) IslandsCF Central African...

Page 37

REFERENCE
37
Troubleshooting
Check the following guide for the possible cause of a problem before contacting service.
Symptom
No power.
The power is on, but
the DVD Receiver does
not work.
No picture.
There is no sound or
only a very low-level
sound is heard.
The playback picture is  poor.
The DVD Receiver does
not start playback.
Loud hum or noise is
heard.Cause
•The power cord is disconnected.
•No disc is inserted.
•The TV is not set to receive DVD signal
output.
•The video cable is not connected...

Page 38

38
Troubleshooting (Continued)
Symptom
Radio stations cannot
be tuned in.
The remote control
does not work properly.
The sound mode or Pro
Logic II mode cannot
be changed.
The front panel display
is too dim.Cause
•The antenna is positioned or  connected
poorly.
•The signal strength of the stations is too
weak (when tuning in with automatic
tuning).
•No stations have been preset or preset
stations have been cleared (when 
tuning by scanning preset stations).
•The remote control is not pointed at the...

Page 39

Power supply 220-240V AC, 50/60Hz
Power consumption 70W, No more than 1 W (220-240V AC) (at the power saving mode)
Mass 4.7 kg
External dimensions (W x H x D) 430 x 70 x 383.5 mm
Operating conditions Temperature: 5°C to 35°C, Operation status: Horizontal
Operating humidity 5% to 85%
Laser Semiconductor laser, wavelength 650 nm for VCD and DVD,
wavelength 780 nm for CD 
Emission duration Continuous
Signal system PAL 625/50, NTSC 525/60
Frequency response (audio) 2 Hz ~ 20 kHz (±1.0 dB)
Signal-to-noise...

Page 40

Sony CorporationPrinted in Chinahttp://www.sony.net
 
Start reading Sony Dav Sb100 Operating Instructions

Related Manuals for Sony Dav Sb100 Operating Instructions

All Sony manuals