Sony Dav F200 Operating Instructions

21GB
Getting Started
Note The DIGITAL OUT jack outputs audio signals only when DVD function is selected (by pressing FUNCTION 
repeatedly until “DVD” appears in the front panel display).
 Connect the DIGITAL MEDIA PORT adapter so that the V marks are aligned. When disconnecting, pull out while 
pressing both sides of the connector (B).
To connect the DIGITAL MEDIA PORT adapter
Connect a DIGITAL MEDIA PORT adapter (not supplied) to the DMPORT jack. For details, see 
“Using the DIGITAL MEDIA PORT Adapter”...

22GB
Getting Started
To connect to a TV equipped with multiple audio/video inputs
You can enjoy the sound with the speakers of the system through the connected TV. Connect the 
components as follows.
Select the component on the TV. For details, refer to the operating instructions of the TV.
If the TV does not have multiple audio/video inputs, a switcher will be necessary to receive the sound 
from more than two components.
Tip If you have poor FM reception, use a 75-ohm coaxial cable (not supplied) to...

23GB
Getting Started
To attach the stand cover and panel cover
After connecting the cables, bundle excess cables and attach the panel cover and stand cover.
Be sure to disconnect the AC power cords of all components from their wall outlets (mains) when 
attaching the stand cover.
1Bundle the cables on the rear of the control unit.
Thread the connected cable along through the stand (1), bundle the cables with the cable ties, in 
the 2 positions, to the rear of the control unit (2), then lock the cable...

24GB
Getting Started
4Attach the stand cover to the rear of the control unit.
Store the connected cables and excess portions of the cable ties inside the stand cover (1), then 
secure the stand cover with the 4 screws (2).
Note Make sure that the cables are not twisted or pinched when attaching the stand cover.
 If the stand cover does not close properly, re-organize the cables.
 Be careful not to pinch any cables while tightening screws.
5Attach the 2 seals (for stand cover) to hide the tightening...

25GB
Getting Started
After connecting the AC power cord (mains lead), the demonstration appears in the front panel display.
To set the demonstration mode to on/off
1Press [/1.
The system turns on.
2Press SYSTEM MENU on the remote.
3Press X/x repeatedly until “DEMO” appears in the front panel display, then press   or 
c.
4Press X/x to select a setting.
: On.
 “DEMO OFF”: Off.
5Press .
The setting is made.
6Press SYSTEM MENU.
The system menu turns off.
Tip When you purchase the system from new, or if the...

26GB
Getting Started
Step 3: Performing the 
Quick Setup
Follow the Steps below to make the basic 
adjustments for using the system.
Displayed items vary depending on the country 
model.
Note When you connect the system and the TV with the 
component video cord (not supplied) or HDMI cable 
(not supplied), you need to set the type of video 
output for matching your TV. For details, see “Setting 
the type of video output to match your TV” (page 27).
1Turn on the TV.
2Press [/1.
The system turns on.
Note...

27GB
Getting Started
To recall the Quick Setup display
1Press FUNCTION repeatedly until 
“DVD” appears in the front panel 
display.
2Press   DISPLAY while the system is 
in stop mode.
The Control Menu display appears on the 
TV screen.
3Press X/x to select   [SETUP], 
then press  .
The options for [SETUP] appear.
4Press X/x to select [QUICK], then press 
.
The Quick Setup display appears.
Depending on the connection of the TV 
(page 19), select the type of video output of the 
system.
To select the type...

28GB
Getting Started
1Press FUNCTION repeatedly until 
“DVD” appears in the front panel 
display.
2Press   DISPLAY while the system is 
in stop mode.
The Control Menu display appears on the 
TV screen.
3Press X/x to select   [SETUP], 
then press  .
The options for [SETUP] appear.
4Press X/x to select [CUSTOM], then 
press .
The Setup Display appears.
5Press X/x to select [VIDEO SETUP], 
then press  .
The options for [VIDEO SETUP] appear.
6Press X/x to select [PROGRESSIVE 
(COMPONENT OUT)], then press  ....

29GB
Getting StartedStep 4: Changing the 
Sound Source
You can enjoy DVD, TV, or VCR sound, etc. by 
changing the sound source.
Press FUNCTION repeatedly until the 
desired function appears in the front panel 
display.
Each time you press FUNCTION, the function 
changes as follows.
“DVD” t “FM” t “USB” t “TV” 
t “SAT/CABLE” t “DMPORT”  t …
Note When you use both the TV (AUDIO IN) jacks 
(analog connection) and TV (DIGITAL IN 
OPTICAL) jack (digital connection) at the same time, 
the digital connection...

30GB
Playing a Disc
     
Depending on the DVD VIDEO or VIDEO CD, 
some operations may be different or restricted.
Refer to the operating instructions supplied with 
your disc.
1Turn on your TV.
2Switch the input selector on the TV to 
this system.
3Press "/1.
The system turns on.
Unless the system is set to “DVD,” press 
FUNCTION to select “DVD.”
“No Disc” appears in the front panel display 
and the system is ready for loading the disc.
4Load a disc.
Push the disc into the disc slot until the disc...