Sony Dav Dz555m Operating Instructions

Advanced Settings and Adjustments
71GB
5Press X/x to select [STANDARD], then 
press .
The selection items for [STANDARD] are 
displayed.
6Press X/x to select a geographic area 
as the playback limitation level, then 
press .
The area is selected.
When you select [OTHERS t], select and 
enter a standard code in the table of 
“Parental Control Area Code List” 
(page 95) using the number buttons.
7Press X/x to select [LEVEL], then press 
.
The selection items for [LEVEL] are 
displayed.
8Press X/x to select...

72GB
Changing the password
1Press   DISPLAY while the system is 
in stop mode.
The Control Menu display appears.
2Press X/x to select   
[PARENTAL CONTROL], then press 
.
The options for [PARENTAL CONTROL] 
appear.
3Press X/x to select [PASSWORD t], 
then press  .
The display for entering the password 
appears.
4Enter your 4-digit password using the 
number buttons, then press  .
5Enter a new 4-digit password using the 
number buttons, then press  .
6To confirm your password, re-enter it 
using the...

Advanced Settings and Adjustments
73GB
 [STANDARD]: when installing all the 
speakers normally.
Note When the wireless kit WAHT-SD1 (not 
supplied) is installed, [STANDARD 
(WIRELESS)] appears instead.
 [NO CENTER]: when installing the front 
and surround speakers.
 [NO SURROUND]: when installing the 
center and front speakers.
 [FRONT ONLY]: when installing the 
front speakers. [ALL FRONT]: when installing all the 
speakers in front of the listening position.
 [ALL FRONT - NO CENTER]: when 
installing...

74GB
6Press .
The setting is made.
7Press X/x to select [YES] or [NO], then 
press .
 [YES]: continue with [AUTO 
CALIBRATION], see Step 4 of 
“Calibrating the Appropriate Settings 
Automatically” (page 74).
 [NO]: exit [SPEAKER FORMATION].
Note In order to enjoy the surround sound after you change 
the position of the speakers, it is recommended you 
set [SPEAKER FORMATION], and then set [AUTO 
CALIBRATION].
 To set [AUTO CALIBRATION], you need to 
connect the supplied calibration mic.
 The front panel...

Advanced Settings and Adjustments
75GB
face the calibration mic, and there should be 
no obstruction between the speakers and the 
calibration mic. Be quiet during the 
measurement.
5Press X/x to select [YES], then press 
.
Calibration starts.
Note Avoid being in the measurement area and 
making noise during the measurement (about 
three minutes), to avoid measurement failure. 
During the measurement, test signals are output 
from the speakers. The environment of the room in which the 
system is...

76GB
– do not insert or eject a disc.
– do not disconnect the calibration mic.
 The measurement for [SUBWOOFER] is always 
[YES] since the system does not perform subwoofer 
calibration.
By using the Setup Display, you can make 
various adjustments to items such as picture and 
sound.
For an overall list of Setup Display items, see 
page 103.
Displayed items vary depending on the country 
model.
Note Playback settings stored in the disc take priority over 
the Setup Display settings and not all the...

Advanced Settings and Adjustments
77GB
The Setup item is selected.
Example: [SCREEN SETUP]
6Select an item using X/x, then press 
.
The options for the selected item appear.
Example: [TV TYPE]
7Select a setting using X/x, then press 
.
The setting is selected and setup is 
complete.
To reset all of the [SETUP] 
settings
1Select [RESET] in Step 4 and press  .
2Select [YES] using X/x.
You can also quit the process and return to the 
Control Menu display by selecting [NO] here.
3Press .
All the settings...

78GB
[LANGUAGE SETUP] allows you to set 
various languages for the on-screen display or 
sound track.
Select [LANGUAGE SETUP] in the Setup 
Display. For details, see “Using the Setup 
Display” (page 76).
x[OSD] (On-Screen Display)
Switches the display language on the TV screen.
x[MENU] (DVD VIDEO only)
You can select the desired language for the 
disc’s menu.
x[AUDIO] (DVD VIDEO only)
Switches the language of the sound track.
When you select [ORIGINAL], the language 
given priority in the disc is...

Advanced Settings and Adjustments
79GB
Note Depending on the DVD, [4:3 LETTER BOX] may be 
selected automatically instead of [4:3 PAN SCAN] or 
vice versa.
x[YCBCR/RGB (HDMI)]
Selects the type of HDMI signal output from 
HDMI OUT jack.
Note If the playback picture becomes distorted, set 
[YCBCR] to [RGB].
 If the HDMI OUT jack is connected to equipment 
with a DVI jack, [RGB] signals will be automatically 
output even when you select [YC
BCR].
x[SCREEN SAVER]
The screen saver image appears when you leave...

80GB
Use this to set up playback related and other 
settings.
Select [CUSTOM SETUP] in the Setup Display. 
For details, see “Using the Setup Display” 
(page 76).
The default settings are underlined.
x[HDMI CONTROL]
Switches the HDMI CONTROL function on or 
off. This function is available when you connect 
the system and TV with the HDMI cord. For 
details on this function, see the HDMI 
CONTROL Guide (supplied separately).
Note When you set to [ON] without the HDMI connection 
of the TV, [Please verify...