Sony Clie Peg Tj35 Handheld Instructions Manual

Customizing your CLIÉ™ handheld (Preferences)81
Setting the Network preferences for your provider and dial-up server
Entering a password
The Password setting identifies the password you use to log into your server or 
ISP. Your entry in this field determines whether your CLIÉ handheld prompts 
you to enter a password each time you log into your network:
 If you do not enter a password, your CLIÉ handheld displays the word 
[-Prompt-] in this field and asks you to enter a password during the log-in...

Customizing your CLIÉ™ handheld (Preferences)82
Setting the Network preferences for your provider and dial-up server
Setting the telephone information
Define the telephone number you use to connect to your ISP or dial-up server. 
In addition, you can also define a prefix, disable Call Waiting, and using a 
calling card.
Note
The calling card option works correctly only for AT&T and Sprint long distance services. 
If you want to call by MCI, you need to set your telephone information by entering the...

Customizing your CLIÉ™ handheld (Preferences)83
Setting the Network preferences for your provider and dial-up server
Note
The calling card option works correctly only for AT&T and Sprint long distance 
services. If you want to call by MCI, you need to set your telephone information by 
entering the calling card number in the field for [Phone #:] and the phone number 
in the field for [Use calling card:].
1Tap   next to [Use calling card:] to change to  .
2
Enter your calling card number (e.g.,...

Customizing your CLIÉ™ handheld (Preferences)84
Setting the Network preferences for your provider and dial-up server
Adding detailed information to a service template
If you are using one of the predefined service templates, you probably only 
need to enter your user name and telephone number. If you are creating a new 
service template, you may need to provide additional information to your ISP 
or dial-up server. Use the Details screen to add additional information to a 
selected service template.
1Tap...

Customizing your CLIÉ™ handheld (Preferences)85
Setting the Network preferences for your provider and dial-up server
4Tap V next to [Idle timeout:], and select one of the following 
options.
1 Minute: 
Waits one minute before dropping the connection when you open another 
application that does not use the network.
2 Minutes: 
Waits two minutes.
3 Minutes: 
Waits three minutes.
Never: 
Keeps your PPP or SLIP connection open until you turn off your CLIÉ handheld 
(or until it times out). Note that this...

Customizing your CLIÉ™ handheld (Preferences)86
Setting the Network preferences for your provider and dial-up server
Duplicating/deleting additional service templates
You can create additional service templates from scratch or by duplicating 
existing templates and editing the information. After you create a new or 
duplicate template, you can add and edit settings.
Duplicating an existing service template
1Tap [V Service:] on the Preferences screen for [Network], 
and select the service template you...

Customizing your CLIÉ™ handheld (Preferences)87
Setting the Network preferences for your provider and dial-up server
Creating log-in scripts
A log-in script is a series of commands that automates logging in to a network 
server, such as your corporate network or your Internet Service Provider (ISP).
You can also use non-ASCII characters or literal characters for Log-in Scripts.
bFor details, refer to “Non-ASCII Characters for Log-in Scripts” on page 89.
1Tap V at the top right of the Preferences screen,...

Customizing your CLIÉ™ handheld (Preferences)88
Setting the Network preferences for your provider and dial-up server
6Repeat Step 4 until the log-in script is complete.
7Tap [OK].
The Details screen is displayed.
8Tap [OK].
The Preferences screen for [Network] is displayed.
Wait ForMakes your CLIÉ handheld wait for specific characters 
from the TCP/IP server before executing the next 
command.
Wait For PromptDetects a challenge-response prompt coming from the 
server and displays the dynamically...

Customizing your CLIÉ™ handheld (Preferences)89
Setting the Network preferences for your provider and dial-up server
Non-ASCII Characters for Log-in Scripts
The following information enables you to create custom log-in scripts that 
require non-ASCII characters. It is provided for advanced users who 
understand the use and requirements of such characters in a custom log-in 
script.
Use of ^char
You may use the caret ( ^ ) to transmit ASCII command characters. If you send 
^char, and the ASCII value of...

Customizing your CLIÉ™ handheld (Preferences)90
Setting the Network preferences for your provider and dial-up server
Using the Network preferences menus
This section describes the menu commands specific to the network 
preferences. For the menu commands that are common for the CLIÉ handheld 
applications, refer to “Common menu items” on page 40.
Service menus
Options menu
[New]Creates a new service template.
[Delete...]Deletes the current service template.
[Duplicate]Duplicates the current service...