Sony Camera Slt A58 Instruction Manual

Using the shooting functions
41GB
Using the shooting functions
Using the flash
In dark environments, use the flash to shoot the subject brightly and to 
prevent camera shake. When shooting against the sun, use the flash to 
lighten the image of the backlit subject.
1Fn button t   (Flash Mode) t Select the desired setting
 For further information on the flash modes available for each shooting 
mode, see page 75.
2Press the   button.
The built-in flash pops up.
 In [Intelligent Auto], [Superior Auto], 
or...

Using the flash
GB42
(Flash Off)Does not fire even if the flash is raised.
 You cannot select this item when the mode dial is set to P, 
A, S, or M. If you do not want to use the flash in these 
modes, push the flash down.
(Autoflash)Fires in dark environments or when shooting towards bright 
light.
(Fill-flash)Fires every time you trigger the shutter.
(Slow Sync.)Fires every time you trigger the shutter. Slow sync shooting 
allows you to shoot a clear image of both the subject and the 
background by...

Using the shooting functions
43GB
Adjusting the image brightness
Normally, the exposure is automatically selected (Automatic exposure).
Based on the exposure acquired by the automatic exposure, you can 
perform exposure compensation. You can make the entire image brighter 
by shifting to the + side. The entire image becomes darker when you shift 
to the – side (Exposure compensation).
 Adjust the compensation level by checking the recorded image.
 Using bracket shooting, you can shoot multiple images...

Adjusting the image brightness
GB44
Notes This item cannot be set when the exposure mode is set to [Intelligent Auto], 
[Superior Auto], or [Scene Selection].
 When the exposure mode is set to M, the exposure can be adjusted only when [ISO] 
is set to [AUTO]. Turn the control dial during AE lock to adjust the compensation 
value.
 Even though you can adjust the exposure between –3.0 EV and +3.0 EV, only a 
value between –2.0 EV and +2.0 EV with the equivalent image brightness appears 
on the screen when...

Using the shooting functions
45GB
 Selecting the drive mode
You can select the appropriate drive mode, such as single, continuous, or 
bracket shooting, to suit your purpose.
 on the control button t 
Select the desired mode
(Single 
Shooting)This mode is for normal shooting.
(Cont. Shooting)The camera records images continuously.
(Self-timer)The 10-second self-timer is convenient if the photographer 
wants to appear in the photo, while the 2-second self-timer is 
convenient for reducing the camera...

GB46
Switching the recording information 
display (DISP)
Graphic Display Each time you press DISP on the control 
button, the recording information display 
changes as follows.
You can set the recording information 
display separately for viewfinder mode 
and LCD screen mode.
[Graphic Display] shows the shutter 
speed and aperture value as graphs, and 
clearly illustrates how the exposure 
works. The pointers on the shutter speed 
indicator and aperture indicator indicate 
the current value.
Shutter...

Using the shooting functions
47GB
Setting image size
MENU button t  1 t [Image Size] t Select the desired size
[Aspect Ratio]: [3:2]
[Aspect Ratio]: [16:9]
Notes When [Quality] is set to [RAW] or [RAW & JPEG], the image size of the RAW 
image corresponds to L. This size is not displayed on the screen.
You can set the image size for panoramic images. The image size varies 
depending on the setting of the shooting direction (page 55).
MENU button t  1 t [Panorama: Size] t Select the desired 
size
Image...

GB48
Using the playback functions
Enlarging images
A still image can be enlarged for closer examination. This is convenient for 
checking the focus condition of a recorded image.
To cancel the enlarged playback
Press the center of the control button and the image returns to normal size.
1Display the image you want to 
enlarge, then press the   button. button
2Zoom the image in or out using the   button or   button.
 Rotate the control dial to switch images at the same magnification. When 
you shoot...

Using the playback functions
49GB
Switching to the image list display
You can display multiple images on the screen simultaneously.
To return to the single-image screen
Press the center of the control button after selecting the desired image.
To display the desired folder
Press the   button.
The image index screen is displayed.
 You can select the number of images 
displayed on one page of the image 
index screen using [Image Index] in the 
 Playback menu.
 button
Select the bar on the left of the image...

GB50
Viewing images on a TV screen
To view images that were recorded on the camera on a TV set, an HDMI 
cable (sold separately) and an HD TV equipped with an HDMI connector 
are required.
1Turn off both your camera and the 
TV, and connect the camera to the 
TV.
2Turn on the TV and switch the input.
 See also the operating instructions supplied with the TV.
3Turn on the camera, and press the 
 button.
Images shot using the camera appear on 
the TV screen.
Select the desired image using b/B on 
the...