Sony Camera Cyber Shot Dsc Hx10v Instruction Manual

							GB
11
GB
 If the Power/Charge lamp on the camera flashes when the AC Adaptor is 
connected to the wall outlet (wall socket), this indicates that charging is 
temporarily stopped because the temperature is outside the recommended range. 
When the temperature gets back within the appropriate range, the charging 
resumes. We recommend charging the battery pack in an ambient temperature of 
between 10°C to 30°C (50ºF to 86ºF).
 The battery pack may not be effectively charged if the terminal section of the 
battery is dirty. In this case, wipe any dust off lightly using a soft cloth or a cotton 
swab to clean the terminal section of the battery.
 Connect the AC Adaptor (supplied) to the nearest wall outlet (wall socket). If 
malfunctions occur while using the AC Adaptor, disconnect the plug from the wall 
outlet (wall socket) immediately to disconnect from the power source.
 When charging is finished, disconnect the AC Adaptor from the wall outlet (wall 
socket).
 Be sure to use only genuine Sony brand battery packs, micro USB cable (supplied) 
and AC Adaptor (supplied).
xCharging time (Full charge)
The charging time is approximately 175 min. using the AC Adaptor 
(supplied).
 The above charging time applies when charging a fully depleted battery pack at a 
temperature of 25°C (77°F). Charging may take longer depending on conditions of 
use and circumstances.
Notes
Note 
						

							GB
12
xCharging by connecting to a computer
The battery pack can be charged by connecting the camera to a computer using 
a micro USB cable.
 Note the following points when charging via a computer:
– If the camera is connected to a laptop computer that is not connected to a power 
source, the laptop battery level decreases. Do not charge for an extended period 
of time.
– Do not turn on/off or restart the computer, or wake the computer to resume from 
sleep mode when a USB connection has been established between the computer 
and the camera. The camera may cause a malfunction. Before turning on/off, or 
restarting the computer or waking the computer from sleep mode, disconnect the 
camera and the computer.
– No guarantees are made for charging using a custom-built computer or a 
modified computer.
Note 
						

							GB
13
GB
xBattery life and number of images that can be 
recorded and played back
 The above number of images applies when the battery pack is fully charged. The 
number of images may decrease depending on the conditions of use.
 The number of images that can be recorded is for shooting under the following 
conditions:
– Using Sony “Memory Stick PRO Duo” (Mark2) media (sold separately)
– The battery pack is used at an ambient temperature of 25°C (77°F).
– [GPS setting] is set to [Off] (DSC-HX10V only).
– [Disp. Resolution] is set to [Standard].
 The number for “Shooting (still images)” is based on the CIPA standard, and is for 
shooting under the following conditions:
(CIPA: Camera & Imaging Products Association)
– DISP (Display Setting) is set to [ON].
– Shooting once every 30 seconds.
– The zoom is switched alternately between the W and T ends.
– The flash strobes once every two times.
– The power turns on and off once every ten times.
 The battery life for movies applies shooting under the following conditions:
– Movie quality: AVC HD HQ
– When continuous shooting ends because of set limits (page 25), press the 
MOVIE (Movie) button again and continue shooting. Shooting functions such as 
the zoom do not operate.
Battery lifeNumber of images
Shooting (still images) Approx. 170 min. Approx. 340 images
Viewing (still images) Approx. 260 min. Approx. 5200 images
Shooting (movies) Approx. 85 min. —
Notes 
						

							GB
14
xSupplying power
The camera can be supplied with power from the wall outlet (wall socket) by 
connecting to the AC Adaptor, using the micro USB cable (supplied).
You can import images to a computer without worrying about draining the 
battery pack by connecting the camera to a computer using the micro USB 
cable.
In addition, you can use the AC Adaptor AC-UD10 (sold separately) for 
shooting to supply power when shooting.
 Power cannot be supplied when the battery pack is not inserted in the camera.
 When the camera is connected directly to a computer or to a power outlet using the 
supplied AC Adaptor AC-UB10/UB10B, power supply is available only in 
playback mode. If the camera is in shooting mode or while you are changing the 
settings of the camera, power is not supplied even if you make a USB connection 
using the micro USB cable.
 If you connect the camera and a computer using the micro USB cable while the 
camera is in playback mode, the display on the camera will change from the 
playback screen to the USB connection screen. Press   (Playback) button to 
switch to the playback screen.
Notes
Inserting a memory card (sold separately)
1Open the cover.
2Insert the memory card (sold separately). With the notched corner facing as illustrated, insert the memory card 
until it clicks into place.
3Close the cover.
Ensure the notched corner 
faces correctly. 
						

							GB
15
GB
xMemory cards that can be used
 In this manual, the products in the table are collectively referred to as follows:
A: “Memory Stick Duo” media
B: “Memory Stick Micro” media
C: SD card
D: microSD memory card
 When using “Memory Stick Micro” media or microSD memory cards with this 
camera, make sure to use with the appropriate adaptor.
xTo remove the memory card/battery pack
Memory card: Push the memory card in once to eject the memory card.
Battery pack: Slide the battery eject lever. Be sure not to drop the battery pack.
 Never remove the memory card/battery pack when the access lamp (page 8) is lit. 
This may cause damage to data in the memory card/internal memory.
Memory cardFor still imagesFor movies
AMemory Stick PRO Duoaa (Mark2 only)
Memory Stick PRO-HG Duoaa
Memory Stick Duoa—
BMemory Stick Micro (M2)a—
Memory Stick Micro (Mark2)aa
CSD memory cardaa (Class 4 or faster)
SDHC memory cardaa (Class 4 or faster)
SDXC memory cardaa (Class 4 or faster)
DmicroSD memory cardaa (Class 4 or faster)
microSDHC memory cardaa (Class 4 or faster)
Note
Note 
						

							GB
16
Setting the clock
1Press the ON/OFF (Power) button.Date & Time setting is displayed when you turn on the camera for the first 
time.
 It may take time for the power to turn on and allow operation.
2Select a desired language.
3Select a desired geographic location by following the 
on-screen instructions, then press z on the control 
wheel.
4Set [Date & Time Format], [Daylight Savings] or 
[Summer Time] and [Date & Time], then select [OK] t 
[OK].
 Midnight is indicated as 12:00 AM, and noon as 12:00 PM.
5Follow the instructions on the screen. The battery pack will run out quickly when:
– [GPS setting] is set to [On] (DSC-HX10V only).
– [Disp. Resolution] is set to [High].
Control wheel ON/OFF (Power)
Power/Charge lamp (green)
Select items: v/V/b/BSet the numeric value of date and 
time: /
Set: 
z 
						

							GB
17
GB
Shooting still images
Shooting movies
 Do not push down or pull up the flash manually. This may cause a malfunction.
 The sound of the lens and lever operating will be recorded when the zoom function 
operates while shooting a movie. The sound of the MOVIE button operating may 
also be recorded when movie recording is finished.
 Continuous shooting is possible for approximately 29 minutes at one time at the 
camera’s default settings and when the temperature is approximately 25°C (77°F). 
When movie recording is finished, you can restart recording by pressing the 
MOVIE button again. Recording may stop to protect the camera depending on the 
ambient temperature.
Shooting still images/movies
1Press the shutter button halfway down to focus. When the image is in focus, a beep sounds and the z indicator lights.
2Press the shutter button fully down to shoot an image.
1Press the MOVIE (Movie) button to start recording. Use the W/T (zoom) lever to change the zoom scale.
 Press the shutter button to shoot still images while continuing to record 
the movie.
2Press the MOVIE button again to stop recording.
Notes
Mode dial
Shutter button
W: zoom out
T: zoom in : Intelligent Auto
: Movie Mode
MOVIE
W/T (Zoom) 
lever
Do not cover the flash (A). 
						

							GB
18
xSelecting next/previous image
Select an image by pressing B (next)/b (previous) on the control wheel or by 
turning the control wheel. Press z in the center of the control wheel to view 
movies.
xDeleting an image
1Press /  (Delete) button.
2Select [This Image] with v on the control wheel, then press z.
xReturning to shooting images
Press the shutter button halfway down.
Viewing images
1Press the   (Playback) button. When images on a memory card recorded with other cameras are played 
back on this camera, the registration screen for the data file appears.
/  (Delete)
Control wheel
 (Playback)
W: zoom out
T: zoom in
Select images:B (next)/b (previous) or turn 
the control wheel
Set: z 
						

							GB
19
GB
This camera is equipped with a built-in instruction guide. This allows you to 
search the camera’s functions according to your needs.
Other functions used when shooting or playing back can be operated using the 
control wheel or MENU button on the camera. This camera is equipped with a 
Function Guide that allows you to easily select from the functions. While 
displaying the guide, you can use various functions.
In-Camera Guide
1Press the MENU button.
2Select the desired MENU item, then press the  /  (In-
Camera Guide) button. 
The operation guide for the selected item is displayed.
 If you press the  /  (In-Camera Guide) button when the MENU screen 
is not displayed, you can search the guide using keywords or icons.
Introduction of other functions
/  (In-Camera Guide)
MENU
MENUControl wheel
Function Guide 
						

							GB
20
xControl wheel
DISP (Display Setting): Allows you to change the screen display.
/  (Cont. Shooting/Self-Timer): Allows you to use the self-timer and 
burst shooting mode.
 (Photo Creativity): Allows you to change [Brightness], [Color], 
[Vividness] and [Picture Effect] when shooting mode is set to [Intelligent 
Auto] or [Superior Auto].
 (Flash): Allows you to select a flash mode for still images.
Center button (Tracking focus): The camera tracks the subject and adjusts 
focus automatically even when the subject is moving.
xMenu Items
Shooting
Movie shooting 
sceneSelect movie recording mode.
3D ShootingSelect the 3D image shooting mode.
Picture EffectShoot a still image with an original texture according to 
the desired effect.
Scene SelectionSelect pre-set settings to match various scene conditions.
Easy ModeShoot still images using minimal functions.
Defocus EffectSet the level of background defocus effect when 
shooting in Background Defocus mode.
Still Image 
Size(Dual Rec)Set the still image size shot while recording a movie.
Still Image Size/
Panorama Image 
Size/Movie Size/
Movie QualitySelect the image size and the quality for still images, 
panoramic images or movie files.
HDR Painting 
effectWhen [HDR Painting] is selected in Picture Effect, sets 
the effect level.
Area of emphasisWhen [Miniature] is selected in Picture Effect, sets the 
part to focus on.
Color hueWhen [Toy camera] is selected in Picture Effect, sets the 
color hue.