Sony 4k Manual

GB
11
Table of Contents
Read this first  ............................ 2
Learning more about the camcorder (Help Guide) ......11
Selecting the recording format  for movies  ........................... 12
Getting started  ........... 14
Supplied items  ......................... 14
Charging the battery pack  ...... 15
Turning the power on .............. 18
Inserting a memory card  ......... 19
Recording/Playback ... 21
Recording ................................. 21
Using the manual adjustment features...

GB
12
Selecting the recording format for 
movies
The camcorder is compatible with the XAVC S format.
What is XAVC S?
XAVC S is a recording format that allows high-resolution images, such 
as 4K, to be highly compressed with MPEG-4 AVC/H.264 and 
recorded in the MP4 file format. High image quality will be obtained 
while keeping the data size within a certain level.
• Bit-rate indicates the quantity of data recorded in a certain period.
Recording formats available and their features
XAVC S 4KXAVC S...

GB
13
• You can change the recording format by selecting    [Image 
Quality/Size]   [ File Format].
• See the following website for the latest storage environment. http://www.sony.net/
• You can store images by connecting to a recorder with an analog AV 
cable (sold separately). Movies are co pied with standard definition image 
quality.
• You can directly copy images to an external media device with the VMC- UAM2 USB Adaptor Cable (sold separately).
To transfer images to a smartphone
You can transfer...

GB
14
Getting started
Supplied items
The numbers in ( ) indicate the 
supplied quantity.
All models
•Camcorder (1)
•AC Adaptor (1)
• Power cord (mains lead) (1)
• USB connection support cable (1)
The USB connection support cable 
is designed for use with this 
camcorder only. Use this cable 
when the Built-in USB Cable of the 
camcorder is too short for 
connection.
•HDMI cable (1)• “Operating Guide” (This manual) 
(1)
• Rechargeable battery pack NP- FV70 (1) 

GB
15
Getting started
Charging the battery pack
1Turn off your camcorder by closing the LCD monitor, 
retract the viewfinder*, and attach the battery pack.
* Models with the viewfinder (FDR-AX33/AXP33/AXP35) only
2Connect the AC Adaptor and the power cord (mains 
lead) to your camcorder and the wall outlet (wall 
socket).
* Align the  mark on the DC plug with that on the DC IN jack.
• The POWER/CHG (charge) lamp turns orange.
• The POWER/CHG (charge) lamp turns off when the battery pack is  fully...

GB
16
Charging the battery using your computer
Turn off your camcorder and connect the camcorder to a running 
computer using the Built-in USB Cable (page 52).
• Change the setting of your computer so that it would not enter the sleep (hibernation) state before charging your camcorder.
Estimated time of charging the supplied battery pack 
(minutes)
• The charging times are measured when charging an empty battery pack to its full capacity at a room temperature of 25 °C (77 °F).
• The charging times are...

GB
17
Getting started
To remove the battery pack
Turn off your camcorder. Slide the BATT (battery) release lever () 
and remove the battery pack ( ).
To charge the battery pack abroad
You can charge the battery pack in any countries/regions using the 
AC Adaptor supplied with your camcorder within the AC 100 V - 240 V, 
50 Hz/60 Hz range.
• Do not use an electronic voltage transformer. 

GB
18
Turning the power on
• To turn off the power, close the LCD monitor. If the viewfinder is pulled out, retract it (models with the viewfinder (FDR-AX33/AXP33/AXP35) 
only).
• To set the date and time again, select     [Setup]   [Clock 
Settings]   [Date & Time Setting]. (In case you haven’t used your 
camcorder for several months)
• To turn off the operating sound, select     [Setup]  
[General Settings]   [Beep]   [Off].
1Open the LCD monitor of your camcorder and turn 
the power on.
• You...

GB
19
Getting started
Inserting a memory card
• To select a memory card as the recording medium, select    
[Setup]   [ Media Settings]   [Media Select]   [Memory Card] 
(FDR-AX30/AXP35).
• To eject the memory card, open the cover and lightly push the memory  card in once.
Types of memory card you can use with your 
camcorder
Recording images in the XAVC S format
* Use an SDXC UHS-I U3 memory  card or faster when the recording mode is set to 100Mbps or higher.
1Open the cover, and insert the memory...

GB
20
Recording images in a format other than XAVC S
To format the recording media
• To ensure stable operation of the memory card, it is recommended to format the memory card with your camcorder before the first use.
• To format the memory card, select     [Setup]   [Media 
Settings]   [Format]   desired recording medium   .
• Formatting the memory card will erase all the data stored on it and the  data will be irrecoverable. Save your important data on your PC, etc.
• Movies recorded on Memory...