Snow Blower Stiga COMPACT LINE SNOW FROST RS SNOW FROST ES SNOW REX 8218 2219 80 Swedish Version Manual

							11
SVENSKASE
11. Byt ut defekta detaljer och återmontera i omvänd 
ordning. Observera! Montera alltid bricka eller 
flänsmutter mot alla plastdetajler.
Observera! Drag inte skruvförbanden för hårt. Detta kan 
skada plastdetajlerna.
8.9 Byte av släpskor (FROST) 
1. Demontera släpskornas (1:G) skruvar och släpskorna på 
höger och vänster sida.
2. Montera de nya släpskorna i omvänd ordning.
9 FÖRVARING
Förvara aldrig snöslungan med bränsle i tanken i 
ett stängt utrymme med dålig ventilation. Mycket 
brandfarliga bensingaser bildas.
Om snöslungan skall förvaras längre tid än 30 dagar, skall 
följande åtgärder vidtas:
1. Töm bensintanken.
2.  Starta motorn och låt den gå tills den stannar på grund av 
bensinbrist.
Töm bensintanken utomhus när motorn är kall. 
Rök inte. Töm i en behållare avsedd för bensin.
4.  Byt motorolja om detta inte har gjorts de sista 3 
månaderna.
5.  Skruva bort tändstiftet och häll 30 ml motorolja i hålet. 
Drag runt motorn några gånger. Skruva tillbaka 
tändstiftet.
6.  Rengör hela snöslungan ordentligt.
7.  Smörj. Se “Smörjning”.
8.  Inspektera snöslungan med hänsyn till skador. Reparera 
vid behov.
9. Bättra eventuella lackskador.
10. Rostskydda olackerade metallytor.
11. Förvara snöslungan om möjligt inomhus. 
10 KÖPVILLKOR
Full garanti lämnas mot fabrikations- och materialfel. 
Användaren måste noggrant följa de instruktioner som ges i 
den bifogade dokumentationen.
För batterier: sex månader från inköpsdatum.
Garantin täcker inte skador som beror på:
- försummelse att ta del av medföljande dokumentation
- ovarsamhet 
- felaktig och otillåten användning eller montering
- användande av reservdelar som inte är originaldelar
- användande av tillbehör som inte levererats eller 
godkänts av Stiga
Garantin täcker heller inte:
- slitdelar som t ex drivremmar, inmatningsskruvar, 
strålkastare, hjul, brytskruvar och wirar
- normal förslitning
- motorer. Dessa täcks av respektive tillverkares garantier 
med separata villkor.
Köparen omfattas av respektive lands nationella lagar. De 
rättigheter som köparen har med stöd av dessa lagar 
begränsas inte av denna garanti. 
						

							www.stiga.com
GGP Sweden AB · Box 1006 · SE-573 28 TRANÅS 
						

							Call barring settingsForbid certain types of calls .
Call forwarding Forward your incoming calls to a different number
 . 
You can choose when to forward: Always forward, 
Forward when busy, Forward when unanswered, 
or Forward when unreachable .
Additional settings Caller ID: Choose whether people you call can see 
your number
 .
Call waiting: See new incoming calls while you’re on 
another call .
 
Contacts
You can add contacts on your phone and synchronize them with the contacts in 
your Google account or other accounts that support contact syncing .
To see your contacts, tap Contacts 
 on the home screen . From there, you can 
tap the tabs on the top to quickly switch to Phone, Call log, or Favorites .
Importing and Exporting Contacts
You can import or export contacts from/to your SIM card, phone storage, or 
microSD card . This is especially useful when you need to transfer contacts 
between different devices .
Importing Contacts from the SIM Card or Exporting to the Card
  1  From the Contacts screen, press  > Import/export .
  2    Choose to import or export contacts . If you have more than one account set 
up on your phone, you will need to select the account to which you’d like to 
import contacts . If not, your phone will automatically display the contacts . 
  3    Tap the contacts you want to import or export  . Or, just tap 
 to select  
all contacts .
 4  Tap  Done or Export .
16 Phone Calls 17
Contacts
Adjusting Your Call Settings (continued) 
						

							Creating a Contact
 1  From the Contacts screen, tap  to add a new contact  .
 2  Tap  Phone contact to choose where to save the contact  .
  3    Enter the contact name, phone numbers, email addresses, postal addresses, 
and other information . 
 4  Tap  Done to save the contact  .
Adding a Contact to Favorites
 1  From the Contacts screen, tap the contact you want to add to Favorites .
 2  Tap 
 next to the contact’s name .
Searching for a Contact
 1 Tap  at the bottom of the Contacts screen .
  2    Enter the contact name you want to search for  . Matching contacts will  
be listed .
Creating a New Group
  1  From the Contacts screen, tap  .
 2  Tap 
 .
  3  Enter the group name and tap Done .
 4  Tap
 
 and select the contacts you wish to be the group members .
 5  Tap 
 .
To send messages to the group members, you can tap a group and then  
press 
 > Send group message .
 
19
Contacts
Importing Contacts from a microSD Card or Exporting to  
the Card
  1    From the Contacts screen, press  > Import/export .
  2    Choose to import or export contacts . If you have more than one account set 
up on your phone, you will need to select the account to which you’d like to 
import contacts .
•    For import, you should have vCard files saved on the microSD card.  
If there’s more than one vCard file, choose to import one, multiple, or all 
vCard files . Tap the vCard file and tap OK .
•    For export, the phone will prompt you with the name of the vCard file.  
Tap OK to create the file on the microSD card .
Importing Contacts from the Phone Storage or Exporting to the 
Phone Storage
 1    From the Contacts screen, press  > Import/export .
  2    Choose to import or export contacts . If you have more than one account set 
up on your phone, you will need to select the account to which you’d like to 
import contacts .
•    For import, you should have vCard files saved in the phone storage. If there’s 
more than one vCard file, choose to import one, multiple, or all vCard files . 
Tap the vCard file and tap OK .
•    For export, the phone will prompt you with the name of the vCard file.  
Tap OK to create the file in the phone storage .
18 Contacts 
						

							21
Entering Text
Entering Text
When you tap a field that needs text or numbers, a keyboard automatically 
appears on the screen . Open the Notifications panel and tap Choose input 
method to change input method . 
Android Keyboard
The Android keyboard provides a layout similar to a desktop computer keyboard . 
Turn the phone sideways and the keyboard will change from portrait to landscape . 
To use the landscape keyboard, from the home screen, press 
  > System 
settings > Accessibility > Auto-rotate screen . 
Note: The landscape keyboard is not supported in all applications .
 
•    Tap the alphabetic keys to enter letters. Tap and hold the keys to enter 
associated accented letters or numbers . For example, to enter È, tap and hold 
 
and the available accented letters and number 3 appear  . Then slide your finger 
to choose È .
•    Tap 
 to use uppercase or lowercase letters . This key also changes to indicate 
the current case you are using:  for lowercase,  for uppercase, and  when 
locked in uppercase . Tap and hold  to lock the keyboard  
in uppercase . •   
Tap
 
 to delete any text you have entered .
•    Tap 
 to select numbers and symbols . You can then tap  to access more . 
Also, frequently used symbols are displayed on top of the keyboard . Swipe left or 
right to find the one you need and tap to enter  .
•    Tap and hold 
 and then swipe to choose emoticons .
•    Tap 
 to use Google’s networked voice input  .
•    Tap and hold 
 to change the input language or the Android keyboard settings .
TouchPal Keyboard
The TouchPal keyboard offers three layouts: Full QWERTY, 12-Key PhonePad, and 
CooTek T+ . 
To Switch the Keyboard Layout
  1    From the home screen, press  > System settings > Language & input >  
next to TouchPal Keyboard > Keyboard layout .
  2    Check the box next to Swipe layout .
  3    On the TouchPal keyboard screen, tap 
, uncheck the Curve check box, and 
tap Close .
  4    Swipe left or right on the TouchPal keyboard to switch between the Full 
QWERTY, 12-Key PhonePad, or CooTek T+ keyboards .
20 Entering Text 
						

							12-Key PhonePad
Tap a key repeatedly until the desired letter or symbol appears . If word prediction 
is enabled ( 
 ), just tap the keys once and choose the  
right word .
CooTek T+
Tap to enter the left letter on the key; Double-tap to enter the desired letter/
symbol on the key  . If word prediction is enabled ( 
 ), just tap the keys and 
choose the right word .
22 Entering Text 23
Entering Text
Full QWERTY
•    Tap the alphabetic keys to enter letters.
•    Tap 
 to use uppercase or lowercase 
letters . This key also changes to indicate  
the current case you are using:  
 for lowercase,  for uppercase,  
and  when locked in uppercase .
•    Slide right on 
 to enable word 
prediction . Slide left on 
  to disable  
word prediction .
•    Tap 
 to change the input language .
•    Tap 
 to enter digits, symbols, emoticons and other pre-defined texts . Tap
  to 
access more . Tap  /  to lock or unlock text input  . Tap  to go back to entering 
letters .
•    Tap 
 to start a new line .
•    Tap or tap and hold 
 to delete text before the cursor  .
•    Tap 
 to access the quick settings of TouchPal keyboard .
•    Tap 
 to change the TouchPal keyboard settings .
•    Tap 
 to open text editing options . You can select, cut, copy, paste, and delete 
text, or move the cursor  .
•    Tap 
 to use voice input  .
•    Tap 
 to hide the on-screen keyboard . Tap the Type message field again to 
show the keyboard . 
						

							To Enable and Use TouchPal Curve
 1    On the TouchPal keyboard screen, tap , check the box next to Curve, and tap 
Close .
  2    Move your finger from letter to letter on the keyboard to trace a word without 
lifting the finger until you reach the end of the word .
Note: TouchPal Curve is only available in the Full QWERTY layout  .
Tips:
•    To enter a single letter, simply tap it.
•    Lift your finger at the end of the word. A space is added automatically when you 
begin to trace the next word .
Choosing Touch Input Settings
Choose the touch input settings by pressing  > System settings > Language & 
input from the home screen .
In the Keyboard & Input Methods section, you can set the default input method 
and choose the settings for input methods .
Messaging
Your SMS (text message) and MMS (multimedia message) are combined into one 
menu under  .
Message Box
Instead of an inbox and outbox, your phone organizes all messages you sent and 
received into one box, where messages exchanged with the same number are 
grouped into one message thread on the Messaging screen . You can tap a thread 
to see the conversation you have had with someone .
Message threads are sorted in chronological order with the latest one on top  .
Sending a Message
 1  From the home screen, tap  .
 2  Tap 
 .
  3    Enter the recipient’s number or name in the To  field . As you type, matching 
contacts will appear  . Tap a suggested contact to add as a recipient or  
tap 
  to access your contacts or call logs .
 4  Tap  the  Type message field and enter your message .
•  Press 
 to insert a smiley, contact, signature, or Quick Text  .
•    If you are sending an MMS, tap 
 to attach a file to the message .
 5  Tap  Send to send your message .
Note: Add an attachment to a text message and it will be converted into an 
MMS automatically  . Likewise, if you remove all attachments from an MMS, it will 
automatically become a text message .
24 Entering Text 25
Messaging
End of the word
Start of the word  
						

							Changing Message Settings
The phone’s message settings are pre-configured for you to use immediately .  
To change them, press  > Settings from the Messaging screen . 
Storage settings: •   Delete old messages: Delete old messages as limits are reached .
•    Text message limit: Set the maximum number of text messages allowed in a 
single thread .
•    Multimedia message limit: Set the maximum number of multimedia 
messages allowed in a single thread .
Text (SMS) message settings:  •   Manage SIM card messages: Manage the messages stored on your SIM card .
•   Service  Center:  Enables you to view and edit the service center number  . 
Multimedia (MMS) message settings:  •   Auto-retrieve: Automatically download multimedia messages .
•    MMS creation mode: Choose to create an MMS message with or without 
restriction, or receive a warning when adding a restricted attachment to an 
MMS message .
Display settings: •   Dialog patterns: Select a dialog pattern .
Notification settings: •   Notifications: Show message notifications in the status bar  .
•    Select ringtone: Choose a ringtone for your incoming messages .
•    Vibrate: Make your phone vibrate when a new message arrives .
26 Messaging
Signature settings:
•   Add signature: Add the signature to all outgoing messages .
•    Edit signature: Edit your signature, which can be added automatically to 
outgoing messages .
WAP push switch settings: •   Enable WAP push receiving: Allow your phone to receive WAP push .
 
27
Messaging 
						

							Email
With the Email application, you can access your email from various providers, 
including Yahoo!® and Gmail .
Creating an Email Account
 1    From the home screen, tap  .
  2    Enter your email address and password .
 3  Tap  Next to let the phone retrieve the network parameters automatically  .
Note: You can also enter these details manually by tapping Manual setup or 
when automatic setup fails .
  4    Follow the on-screen instructions to finish the setup . Your phone will display 
your email inbox and start to download email messages .
Tip: To add more email accounts, open Email to get the Inbox screen and press 
 > Settings > Add Account .
Receiving Email
When you are in an email account, tap  to download recent emails . 
You can adjust how often your account downloads new email by pressing 
 > 
Settings > name of the account > Inbox check frequency . Tap an option to  
select it  .
Composing and Sending an Email
After creating an email account, you can compose and send email messages .
 1  From your inbox, tap 
 .
  2   Tap  the  To field and enter the recipient’s address or tap 
 to select a contact 
or group  .
28 Email
When you enter the address, matching contacts on the phone will be displayed . 
Separate each recipient with a comma .
Tip: You can also press 
 > Add Cc/Bcc to add more recipients .
  3    Enter the subject and the content of your email .
 4  Press 
 > Attach file to add files to the email .
 5  Tap  Send to send the message .
Replying to or Forwarding an Email
 1  From your inbox, open the email you want to reply to or forward .
  2   Tap 
 or  > Forward in the message header to reply to or forward the email . 
You can also tap  > Reply all to reply to all recipients of the email .
  3  Enter the contents/recipients of your email .
 4  Tap  Send . 
Deleting an Email Account
 1  From your inbox, press  > Settings .
  2  Tap the account you want to delete and then tap Remove account .
 3  Tap  OK to confirm . All email messages in the account will be deleted .
Email Settings
General settings apply to all email accounts you add .
 1  From your inbox, press 
 > Settings > General .
  2  Make the changes you want and press 
 when you’re finished .
29
Email 
						

							Connecting to the Internet
Your phone’s impressive networking capabilities allow you to access the Internet 
or your corporate network with ease . You can use default connection settings to 
connect to the web via your mobile network (GPRS/EDGE/3G) or Wi-Fi . The GPRS/
EDGE/3G connection can be enabled/disabled manually . From the home screen, 
press 
 > System settings > Mobile networks and check or uncheck the Data 
enabled check box .
Adding a New GPRS/EDGE/3G Connection
To get connected via GPRS/EDGE/3G, you need a data plan with your service 
provider  . If the GPRS/EDGE/3G settings are not pre-configured on your phone, 
please contact your provider to get the necessary information .
  1    From the home screen, press 
 > System settings > Mobile networks > 
Access Point Names .
 2  Press 
 > New APN .
  3    Tap each item to enter the information you receive from your service provider  . 
 4  Tap  Save  to complete .
Tip: To set the APN to default settings, press 
 > Reset to default .
Turning on Wi-Fi
Wi-Fi provides wireless Internet access over distances of up to 300 feet  
(90 meters) .
From the home screen, press 
 > System settings and then slide the Wi-Fi 
switch to the On  position .
30 Connecting to the Internet 31
Connecting to the Internet
Connecting to a Wi-Fi Network
  1    From the home screen, press  > System settings > Wi-Fi . The Wi-Fi 
network points, or “hotspots,” that your phone has detected are displayed  
with their names and security settings .
  2    Tap a network to connect to it . If security features are implemented, you’ll need 
to enter a password and then tap Connect .
  3    To disconnect from a network, tap the network name and then tap Forget .
Checking the Wi-Fi Network Status
You can check the Wi-Fi network by looking at the  icon in the status bar  . Or, tap 
the network the phone is currently connected to on the Wi-Fi screen . You can then 
check the network status from the pop-up window  .