Smeg Sa20xmfr 7 User Manual

operating & 
installation
instructions
SA20XMFR 

Contents  
 
1. INSTRUCTIONS FOR SAFE AND PROPER USE _______________ 26 
2. INSTALLATION _________________________________________ 28 
3. DESCRIPTION OF CONTROLS ____________________________ 30 
4. USE OF THE OVEN ______________________________________ 35 
5. AVAILABLE ACC ESSORIES _______________________________ 36 
6. COOKING HINTS ________________________________________ 37 
7. CLEANING AND MAINTENANCE ___________________________ 43 
8. EXTRAORDINARY MAINTENANCE _________________________ 45...

 Introduction 
 
1. INSTRUCTIONS FOR SAFE AND PROPER USE 
 
 
THIS MANUAL IS  AN INTEGRAL PART OF THE APPLIANCE AND 
THEREFORE MUST BE KEPT IN ITS ENTIRETY AND IN AN ACCESSIBLE 
PLACE FOR THE WHOLE WORKING LIFE OF THE OVEN. WE ADVISE 
CAREFUL READING OF THIS MANUAL AND ALL THE INSTRUCTIONS 
THEREIN BEFORE USING THE OVEN. INSTALLATION MUST BE CARRIED 
OUT BY QUALIFIED PERSONNEL IN ACCORDANCE WITH THE 
REGULATIONS IN FORCE. THIS APPLIANCE IS INTENDED FOR DOMESTIC 
USES AND CONFORMS TO CURRENT  REGULATIONS...

Introduction   
 
  
 ALWAYS CHECK THAT THE CONTROL KNOBS ARE IN THE “ZERO” (OFF) 
POSITION WHEN YOU FINISH USING THE OVEN. 
 
  
NEVER PUT INFLAMMABLE OBJECTS IN THE OVEN: THEY COULD BE 
ACCIDENTALLY LIGHTED AND CAUSE FIRES. 
  
DURING USE THE APPLIANCE BECOMES VERY HOT. TAKE CARE NOT TO 
TOUCH THE HEATING ELEMENTS INSIDE THE OVEN. 
  
THE I.D. PLATE WITH TECHNICAL DATA, REGISTRATION NUMBER AND 
BRAND NAME IS POSITIONED VISIBLY ON THE OVEN DOOR FRAME. 
THE PLATE MUST NOT BE REMOVED.  
  
THE USE OF...

 
 
Instructions for the installer 
 
28 
2. INSTALLATION 
 
2.1  Electrical connection 
 
Check that mains voltage and power cable ratings are as per the 
indications provided on the label attached to the oven door frame.   
This label must never be removed.  
 
 
It is obligatory for the electrical system to be grounded according to the 
methods required by safety rules. 
 
 
If a plug and socket connection is being used make sure that the plug 
and socket are compatible. Avoid use of adapters and...

 
Instructions for the installer  
  
Mounting the oven 
The oven is designed for mounting into any piece of furniture as long as 
heat-resistant. Proceed according to the dimensions shown in Figures 1, 
2 .
  
  
Fixing is carried out using 4 screws at 
the corners C of the oven door 
frame, after removing the side panels 
secured by the screws A and the 
supports B as shown in figure 3.  To 
replace the side panels, take care to 
engage the pins inside them correctly 
with the supports B, then...

 
 
Instructions for the user 
 
30 
3. DESCRIPTION OF CONTROLS  
3.1  Front control panel 
All the oven controls are grou ped together on the front panel.  
         
FUNCTION SWITCH KNOB  
Rotate the knob in either direction  to select desired function from the 
following: 
 
  
NO FUNCTION SET LOWER HEATING ELEMENT 
+  VENTILATED HEATING 
ELEMENT 
 
 
UPPER AND LOWER  HEATING ELEMENT VENTILATED HEATING 
ELEMENT + VENTILATION 
 
 
WIDE GRILL ELEMENT UPPER AND LOWER 
HEATING ELEMENT + 
VENTILATION...

 
Instructions for the user  
  
 
THERMOSTAT KNOB  
Cooking temperature is selected by 
turning the knob clockwise to the 
desired setting, between 50° and 
250°C.       
 
THERMOSTAT INDICATOR LIGHT 
When this light comes on, the oven is heating up.  
When this light goes out, the preset heating 
temperature has been reached.  
When the light flashes, the temperature inside the 
oven is steady at the set temperature.  
  
 
 
31  

 
 
Instructions for the user 
 
32 
3.2  Electronic Programmer 
   The programmer user instructi ons are valid only for the main oven.  
  
 
  
 
 
  LIST OF FUNCTIONS     MINUTE-COUNTER KEY     COOKING TIME KEY     END-OF-COOKING KEY     DECREASE TIME KEY     INCREASE TIME KEY    
 
 
3.2.1 Clock adjustment 
When using the oven for the first time, or after a power failure, the display 
flashes regularly and indicates 
. Press the keys    and at the 
same time the keys 
 or : each single press changes...

 
Instructions for the user  
  
3.2.2 Semiautomatic cooking 
Use this setting for automatic oven switch-off at the end of cooking time.  
By pressing key , the display lights up, showing ; keep the key 
pressed and at the same time, press keys 
 or  to set the cooking 
time.  
Release key  to start the programmed cooking time count. The display 
will now show the right time together with symbols  A and 
. 
 
3.2.3  Automatic cooking 
Use this setting to automatically start and stop the oven. 
By...