Smeg Lsa13x Instruction Manual

 
User instructions   
 
 
9  
 
 
3.  Description of the controls  
3.1 Upper panel  All the dishwasher controls are grouped on the upper panel. Switch-on, 
programming, switch-off etc. procedures are only possible when the door 
is open.
   
  
 
1 ON/OFF BUTTON 
Pressing this button energises the appliance. 
2 
SELECTED PROGRAM INDICATOR LIGHTS 
Illumination of this light denotes the program selected and the 
occurrence of a fault (troubleshooting). 
3 
PROGRAM SELECTION BUTTON 
By pressing this...

 User instructions    
 
10 
 
8 
ENERSAVE OPTION + EXTRA OPTION BUTTON 
(see “EXTRA OPTIONS” section) 
Press the button to enable/disable the option. 
9 ENERSAVE OPTION LIGHT  
Illuminates to indicate that the function is activated. 
10 HALF LOAD BUTTON 
Press this button to activate the half load wash option. 
11 HALF LOAD LIGHT 
Illuminates to indicate that the function is activated. 
12 3/1 OPTION (EXTRA OPTION) LIGHT 
Illuminates to indicate that the function is activated. 
13 PROGRAM DELAY BUTTON...

 
User instructions   
 
 
11   
PROGRAMS TABLE
 The manual contains the programs table for several models. To find the 
table for your dishwasher, compare the program symbols at the top of the 
table with those on your control panel.  
 
 
 
  
 
 
SETTING THE WASHING PROGRAM AND SWITCHING ON After identifying the most suitable program with the aid of the programs 
table: 
 
• Press the ON/OFF button (1) and wait for the PROGRAM 
INDICATOR LIGHT (2) to illuminate; 
•  Keep pressing the PROGRAM SELECTION...

 User instructions    
 
12  
PROGRAMS TABLE  
     
 PROGRAMME, NUMBER & SYMBOL  
 LOAD CROCKERY AND CUTLERY 
 PROGRAM PROGRESS 
DURATION  CONSUMPTION 
MINUTES (1)  
WATER LITRES
 POWER KWh (1) 
1 SOAK 
 
Pans and dishes awaiting completion of the load. Cold prewash 
 
15’ *** 
 
3,5 0,02 
2 LIGHT 
 
Delicate dishes with normal dirt.
Wash at 45°C Cold rinse Rinse at 70°C Dry 
 
65 *** 
 
9,5 1,10 
 3 ECO (*) 
 EN 50242 
Dishes with normal dirt, even with dried-on residues. 
Cold prewash Wash at 50°C...

 
User instructions   
 
 
13  QUICK TIME PROGRAMS 
(see relevant section for explanation of functioning modes) 
 
 PROGRAMME NUMBER E SYMBOL  
LOAD CROCKERY AND CUTLERY  PROGRAM PROGRESS 
DURATION  CONSUMPTION 
MINUTI (1)  
WATER LITRES POWER KWh (1) 
6 RAPID 27’ 
+ 
Dishes with light dirt, washed immediately after use 
Wash at 38°C Rinse at 50°C 
 
27*** 
 
6,5 0,70 
7 ECO QUICK 
+ 
Dishes with normal dirt, washed immediately after use. 
Cold prewash Wash at 55°C Cold rinse Rinse at 70°C 
 
80’***...

 User instructions    
 
14 
PROGRAMS TABLE  
  
PROGRAMME NUMBER & SYMBOL 
LOAD CROCKERY AND CUTLERY PROGRAM PROGRESS 
DURATION  CONSUMPTION  MINUTES (1)  
WATER LITRESPOWER KWh (1) 
1 SOAK 
 
Pans and dishes awaiting completion of the load Cold prewash 15*** 3,5 0,02 
2 GLASS 
 
Glass, china and mixed dishes with light dirt. 
Wash at 45°C Cold rinse Rinse at 70°C Dry 
 
65*** 
 
9,5 1,10 
3 ECO (*) 
 EN 50242 
Dishes with normal dirt, even with dried-on residues 
Cold prewash Wash at 50°C Cold rinse...

 
User instructions   
 
 
15  QUICK TIME PROGRAMS 
(see relevant section for explanation of functioning modes)  
 PROGRAMME NUMBER E SYMBOL  
LOAD CROCKERY AND CUTLERY  PROGRAM PROGRESS 
DURATION  CONSUMPTION 
MINUTI (1)  
WATER LITRES POWER KWh (1) 
6 RAPID 27’ 
+ 
Dishes with light dirt, washed immediately after use 
Wash at 38°C Rinse at 50°C 
 
27*** 
 
6,5 0,70 
7 ECO QUICK 
+ 
Dishes with normal dirt, washed immediately after use. 
Cold prewash Wash at 55°C Cold rinse Rinse at 70°C 
 
80’***...

 User instructions    
 
16 
 
NOTES AND REFERENCES Only run the soak program with half loads.  Options cannot be used with the soak program. 
* Standard programme under EN 50242. If present, the ENERSAVE option must 
be enabled. 
**  See information sheet provided 
*** IEC/DIN reference programme. If present, the ENERSAVE option must be 
enabled.
 
**** Reference program for laboratories: Detergent: 20g in the dispenser + 10g in the 
door or tablet. Configuration: see photo in “Using the baskets”. 
(1)...

 
User instructions   
 
 
17 
3.2 Washing programs   
  
Before starting a washing program make sure that: 
• The water supply tap is open. 
• The correct amount of detergent has been added to the 
dispenser. 
• The baskets have been correctly loaded. 
• The spray arms are able to rotate freely and without 
obstruction. 
• The dishwasher door is securely closed.   
 
 
 
 QUICK TIME PROGRAMS
 Select this option together with any washing program (except the soak program) 
to SHORTEN the cycle by from a...

 User instructions    
 
18   
 
SPREAD HALF LOAD Suitable when there are not many dishes to be washed, it saves energy 
and reduces the program duration.  Place dishes in both baskets then 
load the detergent dispenser than less than the normal amount for a full 
load.
 
 
 
 
 
 
 EXTRA OPTIONS - “Flexi Tabs” BUTTON
 Press buttons 6 + 8 (QUICK TIME PROGRAMS button + ENERSAVE 
option button) simultaneously to activate the Flexi Tabs option; the 
respective light comes on to confirm the selection. The...