SMC Networks Router SMC7004VBR V.2 User Manual

							Troubleshooting
50
3.Then type ipconfig/renew.
Once you are able to get a valid IP address from the Barricade™ 
Router, then you can now access the web-based Administration 
pages.
If you still are not getting an IP address from the Barricade™, 
please reset the router as outlined in Getting to Know the 
Barricade™ and follow the steps outlined in Troubleshooting 
section again.
If you still cannot access the router once you have reset it, 
please contact SMC Technical Support. 
						

							Troubleshooting
51
I have a Dynamic IP connection 
and I cant get online
Most cable companies use a Dynamic IP configuration to provide 
Internet access. If you have this type of connection, and are 
unable to get connected, please follow the steps outlined below:
1.Unplug the power from your Cable or DSL modem for 2 mins.
2.Confirm that your Barricade™ router is configured for 
a Dynamic IP configuration.
3.Plug the power back into your Modem.
4.Wait for your Modem to connect to the network, and then click 
on the status page of the router to confirm that you are online.
The reason this process works is because certain broadband 
connections require a MAC address to gain network access. 
This MAC address can be changed by following the above 
process
 to re-set the approved MAC address to the MAC 
address of the Barricade™ router. 
						

							53
TECHNICAL SPECIFICATIONS
Below is an outline of the Technical Specifications 
for the Barricade™ 4-Port Cable/DSL Broadband Router.
Standards
  802.3, 802.3u
WAN Port
  1 - 10/100Mbps RJ45, with Auto MDI/MDIX
LAN Port
  4 - 10/100Mbps RJ45, with Auto MDI/MDIX
Supported WAN type
  Static IP
  Dynamic IP
  PPP over Ethernet
  PPTP
  Big Pond
NAT
  Maximum 253 Users
Protocol
  IP Protocol
  TCP/IP v4
  DHCP server
  Proxy DNS server
Management and Configuration
  Web-based
Firewall
NAT firewall and SPI firewall
VPN
VPN pass-through including PPTP/L2TP/IPsec 
						

							Technical Specifications
54
User Authentication
Password protected browser-based UI PAP/CHAP/MSCHAP 
Authentication protocol supported
Upgrade method
  Web-based
LEDs
  Power 
  WAN
  Link
  Activity
Input Power
  DC 5V 2A
Operating Temperature
  0°~40°C
Humidity
  10%~90% non-condensing
Storage Temperature
  -200~700C
Humidity
  0~95% non-condensing
Compliance
  FCC
  CE
  UL
Dimensions
  13.2 x 8.7 x 3.3 cm
Weight
  200g 
						

							i
COMPLIANCES
FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against radio interference in a commercial environment. 
This equipment can generate, use and radiate radio frequency energy and, if not 
installed and used in accordance with the instructions in this manual, may cause 
harmful interference to radio communications. Operation of this equipment in a 
residential area is likely to cause interference, in which case the user, at his own 
expense, will be required to take whatever measures are necessary to correct 
the interference.
Industry Canada – Class B
This digital apparatus does not exceed the Class B limits for radio noise emissions 
from digital apparatus as set out in the interference-causing equipment standard 
entitled “Digital Apparatus” ICES-003 of the Department of Communications.
Cet appareil numérique respecte les limites de bruits radioélectriques applicables 
aux appareils numériques de Classe B prescrites dans la norme sur le matériel 
brouilleur: « Appareils Numériques » NMB-003 édictée par le ministère des 
Communications.
EC Conformance Declaration – Class B
SMC contact for these products in Europe is:
SMC Networks Europe,
Edificio Conata II,
Calle Fructuós Gelabert 6-8, 2o, 4a,
08970 - Sant Joan Despí,
Barcelona, Spain.
This product complies with the requirements of theCouncil Directive 89/336/EEC 
on the Approximation of the laws of the Member States relating to Electromagnetic 
Compatibility and 73/23/EEC for electrical equipment used within certain voltage 
limits and the Amendment Directive 93/68/ EEC. For the evaluation of the 
compliance with these Directives, the following standards were applied:  
						

							COMPLIANCES
ii
Emission:
EN 5022: 1998+A1:2000
EN 61000-3-2: 2000, EN 61000-3-3: 1995+A1:2000
Immunity
EN 55024:1998+A1:2001, 
EN 61000-4-2, 61000-4-3, 61000-4-4, 61000-4-5
EN 61000-4-6, 61000-4-11
Safety Test:
EN 60950
Safety Compliance 
Wichtige Sicherheitshinweise (Germany)
1. Bitte lesen Sie diese Hinweise sorgfältig durch.
2. Heben Sie diese Anleitung für den späteren Gebrauch auf.
3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. 
Verwenden Sie keine Flüssig- oder Aerosolreiniger. Am besten 
eignet sich ein angefeuchtetes Tuch zur Reinigung.
4. Die Netzanschlußsteckdose soll nahe dem Gerät angebracht 
und leicht zugänglich sein.
5. Das Gerät ist vor Feuchtigkeit zu schützen.
6. Bei der Aufstellung des Gerätes ist auf sicheren Stand zu achten. 
Ein Kippen oder Fallen könnte Beschädigungen hervorrufen.
7.
Die Belüftungsöffnungen dienen der Luftzirkulation, die das Gerät vor Überhitzung 
schützt. Sorgen Sie dafür, daß diese Öffnungen nicht abgedeckt werden.
8. Beachten Sie beim Anschluß an das Stromnetz die Anschlußwerte.
9. Verlegen Sie die Netzanschlußleitung so, daß niemand darüber fallen kann. 
Es sollte auch nichts auf der Leitung abgestellt werden.
10. Alle Hinweise und Warnungen, die sich am Gerät befinden, sind zu beachten.
11. Wird das Gerät über einen längeren Zeitraum nicht benutzt, sollten Sie es vom 
Stromnetz trennen. Somit wird im Falle einer Überspannung eine 
Beschädigung vermieden.
12. Durch die Lüftungsöffnungen dürfen niemals Gegenstände oder Flüssigkeiten in das Gerät gelangen. Dies könnte einen Brand bzw. elektrischen Schlag auslösen.
13. Öffnen Sie niemals das Gerät. Das Gerät darf aus Gründen der elektrischen 
Sicherheit nur von authorisiertem Servicepersonal geöffnet werden. 
						

							COMPLIANCES
iii
14. Wenn folgende Situationen auftreten ist das Gerät vom Stromnetz zu trennen 
und von einer qualifizierten Servicestelle zu überprüfen:
a.  Netzkabel oder Netzstecker sind beschädigt.
b.  Flüssigkeit ist in das Gerät eingedrungen.
c.  Das Gerät war Feuchtigkeit ausgesetzt.
d. 
Wenn das Gerät nicht der Bedienungsanleitung entsprechend funktioniert 
oder Sie mit Hilfe dieser Anleitung keine Verbesserung erzielen.
e.  Das Gerät ist gefallen und/oder das Gehäuse ist beschädigt.
f. Wenn das Gerät deutliche Anzeichen eines Defektes aufweist.
15. Stellen Sie sicher, daß die Stromversorgung dieses Gerätes nach der EN60950 
geprüft ist. Ausgangswerte der Stromversorgung sollten die Werte von AC 7,5-8V, 
50-60Hz nicht über- oder unterschreiten sowie den minimalen Strom von 1A 
nicht unterschreiten. Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 
635 Teil 1000 beträgt 70dB(A) oder weniger. 
						

							v
LEGAL INFORMATION
AND
 CONTACTS
SMCs Limited Warranty Statement
SMC Networks Europe (SMC) warrants its products to be free from defects in 
workmanship and materials, under normal use and service, for the applicable warranty 
term. All SMC products carry a standard 2 year limited warranty from the date of 
purchase from SMC or its Authorized Reseller. SMC may, at its own discretion, repair 
or replace any product not operating as warranted with a similar or functionally 
equivalent product, during the applicable warranty term. SMC will endeavour to repair 
or replace any product returned under warranty within 30 days of receipt of the product. 
As new technologies emerge, older technologies become obsolete and SMC will, at its 
discretion, replace an older product in its product line with one that incorporates these 
newer technologies.
The standard limited warranty can be upgraded to a 5 year Limited Lifetime * warranty 
by registering new products within 30 days of purchase from SMC or its Authorized 
Reseller. Registration can be accomplished via the enclosed product registration card 
or online via the SMC web site. Failure to register will not affect the standard limited 
warranty. The Limited Lifetime warranty covers a product during the Life of that 
Product, which is defined as a period of 5 years from the date of purchase of the 
product from SMC or its authorized reseller.
All products that are replaced become the property of SMC. Replacement products 
may be either new or reconditioned. Any replaced or repaired product carries, either 
a 30-day limited warranty or the remainder of the initial warranty, whichever is longer. 
SMC is not responsible for any custom software or firmware, configuration information, 
or memory data of Customer contained in, stored on, or integrated with any products 
returned to SMC pursuant to any warranty. Products returned to SMC should have 
any customer-installed accessory or add-on components, such as expansion modules, 
removed prior to returning the product for replacement. SMC is not responsible for 
these items if they are returned with the product.
Customers must contact SMC for a Return Material Authorization number prior to 
returning any product to SMC. Proof of purchase may be required. Any product 
returned to SMC without a valid Return Material Authorization (RMA) number clearly 
marked on the outside of the package will be returned to customer at customers 
expense. Customers are responsible for all shipping charges from their facility to 
SMC. SMC is responsible for return shipping charges from SMC to customer.
WARRANTIES EXCLUSIVE: IF A SMC PRODUCT DOES NOT OPERATE AS 
WARRANTED ABOVE, CUSTOMERS SOLE REMEDY SHALL BE REPAIR OR 
REPLACEMENT OF THE PRODUCT IN QUESTION, AT SMCS OPTION. THE  
						

							LEGAL INFORMATION AND CONTACTS
vi
FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU 
OF ALL OTHER WARRANTIES OR CONDITIONS, EXPRESSED OR IMPLIED, 
EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, 
INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND 
FITNESS FOR A PARTICULAR PURPOSE. SMC NEITHER ASSUMES NOR 
AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY 
IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE OR USE OF 
ITS PRODUCTS. SMC SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS 
TESTING AND EXAMINATION DISCLOSE THE ALLEGED DEFECT IN THE 
PRODUCT DOES NOT EXIST OR WAS CAUSED BY CUSTOMERS OR ANY 
THIRD PERSONS MISUSE, NEGLECT, IMPROPER INSTALLATION OR TESTING, 
UNAUTHORIZED ATTEMPTS TO REPAIR, OR ANY OTHER CAUSE BEYOND 
THE RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, 
OR OTHER HAZARD.
LIMITATION OF LIABILITY: IN NO EVENT, WHETHER BASED IN CONTRACT OR 
TORT (INCLUDING NEGLIGENCE), SHALL SMC BE LIABLE FOR INCIDENTAL, 
CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, 
OR FOR LOSS OF REVENUE, LOSS OF BUSINESS, OR OTHER FINANCIAL 
LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION, 
MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF ITS 
PRODUCTS, EVEN IF SMC OR ITS AUTHORIZED RESELLER HAS BEEN ADVISED 
OF THE POSSIBILITY OF SUCH DAMAGES. 
SOME COUNTRIES DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES 
OR THE LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR 
CONSUMER PRODUCTS, SO THE ABOVE LIMITATIONS AND EXCLUSIONS MAY 
NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, 
WHICH MAY VARY FROM COUNTRY TO COUNTRY. NOTHING IN THIS 
WARRANTY SHALL BE TAKEN TO AFFECT YOUR STATUTORY RIGHTS.
* Under the limited lifetime warranty, internal and external power supplies, fans, and 
cables are covered by a standard one-year warranty from date of purchase.
Full Installation Manual
Full installation manuals are provided on the Installation CD-Rom. Manuals in other 
languages than those included on the CD-Rom are provided on www.smc-europe.com 
(section support). 
						

							LEGAL INFORMATION AND CONTACTS
vii
Firmware and Drivers
For latest driver, technical information and bug-fixes please visit www.smc-europe.com 
(section support).
Contact SMC
Contact details for your relevant countries are available on www.smc-europe.com and 
www.smc.com.
Statement of Conditions
In line with our continued efforts to improve internal design, operational function, and/or 
reliability, SMC reserves the right to make changes to the product(s) described in this 
document without notice. SMC does not assume any liability that may occur due to
the use or application of the product(s) described herein. In order to obtain the most 
accurate knowledge of installation, bug-fixes and other product related information we 
advise to visit the relevant product support page at www.smc-europe.com
 before you 
start installing the equipment. All information is subject to change without notice.
Limitation of Liability
In no event, whether based in contract or tort (including negligence), shall SMC 
be liable for incidental, consequential, indirect, special or punitive damages of any 
kind, or for loss of revenue, loss of business or other financial loss arising out of 
or in connection with the sale, installation, maintenance, use, performance, failure 
or interruption of its products, even if SMC or its authorized reseller has been adviced 
of the possiblity of such damages.
Copyright
Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate 
and reliable. However, no responsibility is assumed by SMC for its use, nor for any 
infringements of patents or other rights of third parties which may result from its use. 
No license is granted by implication or otherwise under any patent or patent rights 
of SMC. SMC reserves the right to change specifications at any time without notice.
Trademarks
SMC is a registered trademark and EZ Connect is a trademark of SMC Networks, Inc. 
Other product and company names are trademarks or registered trademarks of their 
respective holders.