SMC Networks Router SMC7004VBR V.2 User Manual

Advanced Setup
39
This tool will also allow you to MAP DHCP IP Addresses to 
certain MAC Addresses. This tool works well in conjunction 
with the Parental Control rules to provide maximum control.
  Website Blocking
The [Website Blocking] feature of the Barricade™ limits 
access to website domains (i.e. www.somesite.com) or by 
using keywords which will block any websites that have that 
keyword in the URL. This feature is an ideal way to protect 
your family members from questionable content on the...

Navigating the Web-based Administration
40
[Advanced Firewall Settings]
This section allows you to configure several advanced 
features for the Barricade™ Firewall.
The following features can be set on this page:
[Advanced Firewall Protection:] 
Enable/Disable SPI section of firewall.
[Discard Ping from WAN:] 
When this feature is enabled, any host on the WAN 
cannot ping this product. This helps avoid unnecessary 
attacks from the WAN side because your connection is 
invisible. It is recommended that...

Advanced Setup
41
[Email Settings:] 
Configure this option if you want the Barricade™ to 
email when hackers attempt to attack your network to 
a specific email address. You will need to configure your 
email address, username and password, as well as a 
SMTP server to send the mail through.
DMZ (Demilitarized Zone)
If you have a client PC that cannot run an Internet application 
properly from behind the firewall, then you can open the client 
PC up to unrestricted two-way Internet access. Enter the LAN...

Navigating the Web-based Administration
42
The section also has a [Server Configuration] section that 
automatically opens the port options checked in the [Virtual 
Server] section. Simply enter in the IP address of your server, 
such as a web server, and then click on the port option 
[HTTP Port 80] so users can access your server from 
the WAN connection (Internet).
UPnP
The Barricade™ supports UPnP (Universal Plug and Play), 
a networking architecture that provides compatibility amongst 
networking...

Advanced Setup
43
Tools
Use the [Tools] menu to backup the current configuration, 
restore a previously saved configuration, restore factory settings, 
update firmware, and reset the Barricade™.
[Configuration Tools]
[Backup Router Settings]
Backup saves the Barricade™s configuration to a file.
[Restore Router Settings]
To restore settings from a saved backup configuration file.
[Reset Barricade to Factory Settings]
Restores the Barricade™ settings back to the factory 
default settings. 

Navigating the Web-based Administration
44
Firmware Upgrade
This tool permits easy downloading of the latest Firmware. 
Download the upgrade file from the SMC website 
(
www.smc.com or www.smc-europe.com) and save it to 
your hard drive. Browse for the file and then click [Apply]. 
Check the [Status page Information] section to confirm 
that the upgrade process was successful.
Reboot
Click [Apply] to reboot the Barricade™. The reset will 
be complete when the power LED stops blinking.
Note: 
Some...

Advanced Setup
45
  [INFORMATION] 
Displays the number of attached clients, the firmware versions, 
and the physical MAC address for each media interface, as 
well as the hardware version and serial number.
  [Security Log] 
Displays illegal attempts to access your network.
– Click on the [Save] button to save a security log file.
– Click on the [Clear] button to delete the access log.
– Click on the [Refresh] button to refresh the screen.
  [DHCP Client Log]
Displays information on all DHCP clients...

47
TROUBLESHOOTING
The information outlined in this section describes some useful 
steps for getting your computer and Barricade™ router online.
Verify you are connected to the 
Barricade™ Router
If you are unable to access the Barricade™s web-based 
administration pages, then you may not be properly connected 
or configured. The screen shots in this section were taken 
on a Windows 2000 machine, but the same steps will apply 
to Windows 95/98/Me/XP.
To determine your TCP/IP configuration status, please...

Troubleshooting
48
If you have an IP address that starts with 169.254.XXX.XXX 
then see section “I am getting an IP Address that starts with 
169.254.XXX.XXX”.
If you have another IP address configured, see section “I have 
another IP Address displayed”.
I am getting an IP Address that starts 
with 169.254.XXX.XXX
If you are getting this IP Address, then you need to check 
that you are properly connected to the Barricade™ Router.
Confirm that you have a good link light on the Barricade™s 
port to which...

Troubleshooting
49
If you are still unable to get an IP Address from the Barricade™, 
reinstall your network adapter. Please refer to your adapter 
manual for instructions.
I have another IP Address displayed
If you have another IP address listed, then the PC may not be 
configured for a DHCP connection. Please refer to Configuring 
your Computer for information.
Once you have confirmed your computer is configured for 
DHCP, then please follow the steps below.
1.Open a DOS window as described above....