Singer Samba 7 User Guide

Instruction Manual 

When using an electrical appliance, basic safety precautions
should always be followed, including the following:
Read all instructions before using this sewing machine.
1. An appliance should never be left unattended when
plugged in.
2. Always unplug this appliance from the electric outlet
immediately after using and before cleaning.
1. Do not allow to be used as a toy. Close attention is
necessary when this appliance is used by or near children.
2. Use this appliance only for its intended use as...

Congratulations
As the owner of a new Singer sewing machine, you are about to begin an exciting adventure in
creativity. From the moment you first use your machine, you will know you are sewing on one of
the easiest to use sewing machines ever made.
May we recommend that, before you start to use your sewing machine, you discover the many
advantages and the ease of operation by going through this instruction book, step by step,
seated at your machine.
To ensure that you are always provided with the most...

Principal parts of the machine.....................................................2/3
Accessories....................................................................................4
Fitting the snap-in sewing table .....................................................5
Connecting machine to power source............................................6
Changing the bulb ..........................................................................7
...................................................9
11
Raising...

1. Thread tension dial
3. Thread take-up lever
5. Presser foot
6. Needle plate
7. Removable sewing table/accessory storage
8. Bobbin stopper
9. Stitch length dial
11. Pattern indicator window
12. Reverse sewing lever2. Presser foot pressure adjustment
4. Thread cutter
(not on all models)
10. Stitch width dial (not on all models)
2
Principal parts of the machine
1
2
3
4
5
6
78
9
10
11
12 

13. Horizontal spool pin
22. Handle
23. Presser foot lever
24. Feed speed control
25. Power cord 14. Bobbin winder
15. Handwheel
16. Pattern selector dial
17. Power and light switch
18. Main plug socket
19. Bobbin thread guide
20. Upper thread guide
21. Face plate
3
Principal parts of the machine
24
25 13
14
15
16
17
1819
20
22
23
21 

Standard a Optional accessoriesccessories
a. All purpose foot
Buttonhole foot
Button sewing foot
L-screwdriver
Seam ripper/ brush
g. Oil bottle
Pack of needles
Bobbin (3x)
L. Spool holder(These 6 accessories are not
supplied with this machine;
they are however available as
special accessories from your
local dealer.)
m. Satin stitch foot
n. Overcasting foot
o. Hemmer foot
p. Blind hem foot
q. Cording foot
r. Darning foot b. Zipper foot
c.
d.
e.
f.
h.
I.
j. Seam guide
k. Darning plate
Optional a iccessor...

Keep the snap-in sewing table horizontal, and push it in the
direction of the arrow. (1)
The inside of the snap-in sewing table can be utilized as an
accessory box.
To open, lift up at the point of the arrow. (2)
5
Fitting the snap-in sewing table 

Polarized attachment plug
Conductor
intended to be grounded Connect the machine to a power source as illustrated. (1)
For appliance is equipped with a polarized plug which must be
used with the appropriate polarized outlet. (2)
Unplug power cord when machine is not in use.
The foot control pedal regulates the sewing speed. (3)
Consult a qualified electrician if in doubt as to connect
machine to power source.
Unplug power cord when machine is not in use.
The foot control must be used with the appliance by...

Disconnect the machine from the power supply by removing
the plug from the main socket!
- Loosen screw (A) as illustrated. (1)
- Remove the face plate (B).
- Unscrew the bulb and install a new one (C). (2)
- Replace the face plate and tighten screw.
Should there be any problem, ask your local dealer for advice.
7
Changing the bulb
1
2C
AB