Singer Magic Press 6 Manual

							Pants Pants1.Place the Pressing Cushion under the waistband and press, 
repositioning the  waistband until completely pressed. 1.Place the Pressing Cushion under the waistband and press, 
repositioning the  waistband until completely pressed.2.To press the in-seam, place the cushion under the area to 
be pressed. 2.To press the in-seam, place the cushion under the area to 
be pressed.3.Place the pleated area on the Ironing Board. Carefully fold
pleats and press. 3.Place the pleated area on the Ironing Board. Carefully fold
pleats and press.4.Embroidery should be placed face down on the Ironing Board 
to reduce wear and prevent damage to delicate areas. 4.Embroidery should be placed face down on the Ironing Board 
to reduce wear and prevent damage to delicate areas.10 10TIPS PRESSING TIPS PRESSING 
						

							Other Techniques Other Techniques1.Placing the pressing cushion between the fabric and the Pressing Plate may help with delicate fabrics. 1.Placing the pressing cushion between the fabric and the Pressing Plate may help with delicate fabrics.2.Buttons and Zippers: if you have older types of buttons or zippers, you may need  to take special 
care to avoid melting. In order to do so, place the garment face down and cover with a pressing 
cushion before pressing. 2.Buttons and Zippers: if you have older types of buttons or zippers, you may need  to take special 
care to avoid melting. In order to do so, place the garment face down and cover with a pressing 
cushion before pressing.3.Spray bottle may be used to spray the fabric lightly. This will further help to remove stubborn wrinkles. 3.Spray bottle may be used to spray the fabric lightly. This will further help to remove stubborn wrinkles.4.Place a damp cloth over the fabric before pressing, which will help with stubborn wrinkles or heavy 
gauge fabrics. 4.Place a damp cloth over the fabric before pressing, which will help with stubborn wrinkles or heavy 
gauge fabrics.5.To press large pieces of fabric, place entire piece behind the Ironing Board. Pull the fabric towards
you, over the Ironing Board, and lower the Pressing Plate. Press the fabric in sections until completed.  5.To press large pieces of fabric, place entire piece behind the Ironing Board. Pull the fabric towards
you, over the Ironing Board, and lower the Pressing Plate. Press the fabric in sections until completed. 1.For garments constructed with details such as darts, curved seams, and
 shoulder pads, a Pressing Cushion may be used. 1.For garments constructed with details such as darts, curved seams, and
 shoulder pads, a Pressing Cushion may be used.2.Use the cushion in areas where no creases are desired or to shape a tailored
garment.  2.Use the cushion in areas where no creases are desired or to shape a tailored
garment. 3.Place the area to be pressed onto the Ironing Board. 3.Place the area to be pressed onto the Ironing Board.4.Place the Pressing Cushion under the dart, seam, etc. 4.Place the Pressing Cushion under the dart, seam, etc.5.Making sure that the area to be pressed is raised, lower the Pressing Plate 
until it meets the raised area.  5.Making sure that the area to be pressed is raised, lower the Pressing Plate 
until it meets the raised area. 6.Do not force the plate to its lowest position, as this may cause damage to the unit. 6.Do not force the plate to its lowest position, as this may cause damage to the unit.Using the Pressing Cushion Using the Pressing Cushion11 11TIPS PRESSING TIPS PRESSING 
						

							CLEANING THE STEAM PRESS CLEANING THE STEAM PRESSCLEANING THE STEAM PRESS & STORAGE CLEANING THE STEAM PRESS & STORAGE1.Place the Pressing Cushion in the middle of Ironing Board. 1.Place the Pressing Cushion in the middle of Ironing Board.2.Place a clean towel over the Pressing Cushion and the Ironing Board. 2.Place a clean towel over the Pressing Cushion and the Ironing Board.3.Set the temperature control Button to its highest setting(LINEN). 3.Set the temperature control Button to its highest setting(LINEN).4.When the Steam Burst Ready Indicator Light illuminates, lower Pressing 
Plate onto the pressing cushion. 4.When the Steam Burst Ready Indicator Light illuminates, lower Pressing 
Plate onto the pressing cushion.5.Press the steam burst button six times. 5.Press the steam burst button six times.6.Allow the Pressing Plate to cool. 6.Allow the Pressing Plate to cool.7.Clean the pressing plate with a damp cloth. 7.Clean the pressing plate with a damp cloth.8. Do not use abrasives or you may damage the plate. 8. Do not use abrasives or you may damage the plate.9.The Ironing Board cover is removable for cleaning. Hand wash only with
mild detergent. 9.The Ironing Board cover is removable for cleaning. Hand wash only with
mild detergent.STORAGE STORAGE1. Once pressing is complete, immediately turn unit off and unplug power 
cord from electrical outlet. 1. Once pressing is complete, immediately turn unit off and unplug power 
cord from electrical outlet.2.Allow unit to cool completely(at least 30 minutes). 2.Allow unit to cool completely(at least 30 minutes).3.Lower pressing plate down;and turn Locking Knob to Lockposition. 3.Lower pressing plate down;and turn Locking Knob to Lockposition.4.Wrap up power cord and place in Cord Storage Compartment. 4.Wrap up power cord and place in Cord Storage Compartment.5.Store all accessories safely away, preferably near Digital Fabric Steam Press. 5.Store all accessories safely away, preferably near Digital Fabric Steam Press.6.Store Digital Fabric Steam Press in a cool, dry place. 6.Store Digital Fabric Steam Press in a cool, dry place.7.For long-term of storage, Press the steam button time to time, to use up the water 
remain in the water reservoir. 7.For long-term of storage, Press the steam button time to time, to use up the water 
remain in the water reservoir.12 12 
						

							TROUBLE SHOOTING TROUBLE SHOOTINGPROBLEM PROBLEMPOSSIBLE CAUSE POSSIBLE CAUSESOLUTION SOLUTIONUnit fails to steam. 
Power Indicator Light
does not illuminate. Unit fails to steam. 
Power Indicator Light
does not illuminate.Unit fails to steam.
Power Indicator 
Light does illuminate. Unit fails to steam.
Power Indicator 
Light does illuminate.Steam Burst output is
weak or intermittent. Steam Burst output is
weak or intermittent.Pressing Plate needs to be
cleaned. Pressing Plate needs to be
cleaned.Unit is damaged  or malfunctioning. Unit is damaged  or malfunctioning.Water Reservoir is empty. Water Reservoir is empty.Auto Shut-Off has engaged. Auto Shut-Off has engaged.Household Circuit Breaker/
Ground Fault Interrupter has
tripped or blown a fuse. Household Circuit Breaker/
Ground Fault Interrupter has
tripped or blown a fuse.Unit is not plugged in. Unit is not plugged in.Plug into electrical outlet. Plug into electrical outlet.Reset Circuit Breaker/Ground Fault 
Interrupter, or replace fuse. If you need  
assistance, Contact a licensed electrician. Reset Circuit Breaker/Ground Fault 
Interrupter, or replace fuse. If you need  
assistance, Contact a licensed electrician.Refer to Auto Shut-Off section on page 5 
of this manual for proper procedure. Refer to Auto Shut-Off section on page 5 
of this manual for proper procedure.Refill Water Reservoir using procedures
 on page 6-7 of this manual. Refill Water Reservoir using procedures
 on page 6-7 of this manual.Please contact our customer support 
department.  Please contact our customer support 
department. Refer to Cleaning the Digital Fabric 
Steam Press section on page 11 of this 
manual for proper procedure.  Refer to Cleaning the Digital Fabric 
Steam Press section on page 11 of this 
manual for proper procedure. Before taking the unit to a service center, please check the following list of common problems for your issue.  Before taking the unit to a service center, please check the following list of common problems for your issue. 13 13WARNING :If the supply cord is damaged, it must be replaced by the manufacturer, its service agent 
or a similarly qualified person in order to avoid a hazard. WARNING :If the supply cord is damaged, it must be replaced by the manufacturer, its service agent 
or a similarly qualified person in order to avoid a hazard. 
						

							V061008 V061008The meaning of the crossed-through waste bin symbol on the appliance is that the 
product must be disposed of separately to other household waste at the end of the 
useful life of the appliance. The user is responsible for delivering the appliance 
to an appropriate collection centre at that time.
Appropriate separate collection for environment-friendly treatment and recycling 
prevents or reduces harmful effect on the environment and human health. You can 
obtain information on available collection services in your area by contacting 
your local Council waste collection department, or the retailer from which you 
bought the appliance. The meaning of the crossed-through waste bin symbol on the appliance is that the 
product must be disposed of separately to other household waste at the end of the 
useful life of the appliance. The user is responsible for delivering the appliance 
to an appropriate collection centre at that time.
Appropriate separate collection for environment-friendly treatment and recycling 
prevents or reduces harmful effect on the environment and human health. You can 
obtain information on available collection services in your area by contacting 
your local Council waste collection department, or the retailer from which you 
bought the appliance.This electrical appliance complies with directive 2002/96/EC(Waste Electrical
 and Electronic Equipment----WEEE). This electrical appliance complies with directive 2002/96/EC(Waste Electrical
 and Electronic Equipment----WEEE).