Singer Harmony 2 Manual

							HARMONY SINGER 2 
Battery-Powered Vocal Effects Stompbox with 
Guitar-Controlled Harmony, Reverb and Tone
User Manual   
						

							2Harmony Singer 2 User Manual
Important Safety 
Instructions
LEGAL DISCLAIMER
LIMITED WARRANTY
Terminals marked with this symbol carry 
electrical current of suffi   cient magnitude 
to constitute risk of electric shock. 
Use only high-quality professional speaker cables with 
¼" TS or twist-locking plugs pre-installed. All other 
installation or modifi  cation should be performed only 
by qualifi  ed personnel.
This symbol, wherever it appears,  alerts you to the presence of uninsulated 
dangerous voltage inside the 
enclosure - voltage that may be suffi    cient to constitute a 
risk of shock.
This symbol, wherever it appears,  alerts you to important operating and 
maintenance instructions in the 
accompanying literature. Please read the manual.
Caution To reduce the risk of electric shock, do not 
remove the top cover (or the rear section). 
No user serviceable parts inside. Refer servicing to 
qualifi  ed personnel.
Caution To reduce the risk of fi  re or electric shock, 
do not expose this appliance to rain and 
moisture. The apparatus shall not be exposed to dripping 
or splashing liquids and no objects fi  lled with liquids, 
such as vases, shall be placed on the apparatus.
Caution These service instructions are for use 
by qualifi  ed service personnel only. 
To reduce the risk of electric shock do not perform any 
servicing other than that contained in the operation 
instructions. Repairs have to be performed by qualifi  ed 
service personnel.
1.  Read these instructions.
2.  Keep these instructions.
3.  Heed all warnings.
4.  Follow all instructions.
5.  Do not use this apparatus near water.
6.  Clean only with dry cloth.
7.  Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8.  Do not install near any heat sources such as 
radiators, heat registers, stoves, or other apparatus
(including amplifi  ers) that produce heat.
9.  Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two blades 
with one wider than the other. A grounding-type plug 
has two blades and a third grounding prong. The wide 
blade or the third prong are provided for your safety. If the
provided plug does not fi  t into your outlet, consult an 
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or 
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11. Use only attachments/accessories specifi  ed by
the manufacturer.
12.Use only with the 
cart, stand, tripod, bracket, 
or table specifi  ed by the 
manufacturer, or sold with 
the apparatus. When a cart
is used, use caution when 
moving the cart/apparatus 
combination to avoid 
injury from tip-over.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time. 
14. Refer all servicing to qualifi  ed service personnel. 
Servicing is required when the apparatus has been 
damaged in any way, such as power supply cord or plug 
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed 
to rain or moisture, does not operate normally, or has 
been dropped.
15. The apparatus shall be connected to a MAINS socket
outlet with a protective earthing connection.
16. Where the MAINS plug or an appliance coupler is 
used as the disconnect device, the disconnect device shall
remain readily operable.
17.Correct disposal of this 
product: This symbol indicates 
that this product must not be 
disposed of with household 
waste, according to the WEEE 
Directive (2012/19/EU) and 
your national law. This product
should be taken to a collection center licensed for the 
recycling of waste electrical and electronic equipment 
(EEE). The mishandling of this type of waste could have 
a possible negative impact on the environment and 
human health due to potentially hazardous substances 
that are generally associated with EEE. At the same time, 
your cooperation in the correct disposal of this product 
will contribute to the effi    cient use of natural resources. 
For more information about where you can take your 
waste equipment for recycling, please contact your local 
city offi    ce, or your household waste collection service.
18. Do not install in a confi  ned space, such as a book
case or similar unit.
19. Do not place naked fl  ame sources, such as lighted
candles, on the apparatus.
20. Please keep the environmental aspects of battery
disposal in mind. Batteries must be disposed-of at a 
battery collection point.
21.Use this apparatus in tropical and/or
moderate climates.
MUSIC Group accepts no liability for any loss 
which may be suff  ered by any person who relies 
either wholly or in part upon any description, 
photograph, or statement contained herein. 
Technical specifi  cations, appearances and other 
information are subject to change without notice. 
All trademarks are the property of their respective 
owners. MIDAS, KLARK  TEKNIK, LAB GRUPPEN, LAKE, 
TANNOY, TURBOSOUND, TC ELECTRONIC, TC HELICON, 
BEHRINGER, BUGERA  and DDA are trademarks 
or registered trademarks of MUSIC Group IP Ltd. 
© MUSIC Group IP Ltd. 2016 All rights reserved.
For the applicable warranty terms and conditions 
and additional information regarding MUSIC Group’s 
Limited Warranty, please see complete details online at 
music-group.com/warranty.  
						

							3Harmony Singer 2 User Manual
1.Controls
\(1
\(5\) \(4\)\(8\)
\(6\)
\(7\) \(9\)
\(10\) 11\) 12\)
\(1HARMONY  knob selects the harmonies that will be blended with your voice. 
See Chapter 2: Using the Harmony Knob for details. 
\(2\)LEVEL  knob adjusts the volume of the harmonies. 
\(3\)REVERB  knob selects the type and amount of reverb effect on your voice. 
The 3 types of reverb appear in order from the smallest space (Room) to the 
largest (Hall). Adjusting the knob within your preferred reverb 
space determines how pronounced the effect will be. 
Turning the knob fully counterclockwise turns the reverb off. 
\(4\)BATTERY LED indicates the battery level, with green showing full life, 
yellow being partial life, and red to alert that the batteries 
should be changed. 
\(5\)TONE  button engages a preset combination of adaptive EQ, compression, 
de-essing, and noise gate. “Normal ” and “Less Bright” settings can be 
toggled by holding the Tone button and pressing the footswitch. 
\(6\)ON/OFF LED  lights when the effect is engaged.
\(7\)FOOTSWITCH  bypasses the harmony effect, 
but does not affect the reverb or Tone status. 
\(8\)USB input accepts a micro USB cable for connection to a computer. Use the 
VoiceSupport application to install firmware updates, and for other features 
depending on your product.
Download VoiceSupport from www.tc-helicon.com/products/voicesupport/
\(9\)ON/OFF  switch powers the pedal on and off. 
\(10\) POWER input accepts a 9V power cable (not included).
\(11\) OUT jack accepts a balanced XLR cable for
connection to a mixer or active speaker. 
\(12\) MIC input jack accepts a balanced XLR cable to connect your microphone.  
						

							4Harmony Singer 2 User Manual
2.Operation
Connection
Micro USB cable MP-75 microphone
Mixing board
Power cable  
						

							5Harmony Singer 2 User Manual •
Connect a microphone to the MIC jack
• Connect the OUT jack to a mixer, interface or active speaker
• Connect a guitar to the Guitar Input jack on the right side of the pedal\
• Connect the left Guitar Output jack to an amplifier or mixing console  
Optional:
• Connect a micro USB cable to a computer
• Connect power cable 
• Using the Har
mony Knob 
The Harmony knob selects a single harmony voice or combination of voices 
higher or lower in pitch than your voice. The chart below shows name and pitch 
intervals for each position on the Harmony knob. 
Guitar Input
Connect any guitar pedals between Harmony Singer’s Guitar Output jack and 
the input of your amp. Connecting and activating some guitar pedals before the 
Guitar Input jack may adversely affect vocal harmony production.
Tips:
•	Strumming chords works better than single note playing for 
harmony control
•	When changing chords, ensure that the root and 3rd of each 
new chord are played clearly
•	To harmonize correctly from the first chord of a song, 
briefly play the first chord before singing Momentary Mode
The standard function of the footswitch is a latching style, meaning that each 
press of the footswitch turns the harmony on and off. Alternatively, the pedal can 
operate in momentary mode, meaning that the harmony is only active while the 
footswitch is held down. As soon as you release the footswitch,  
the harmony is bypassed. 
To switch the unit to momentary mode, hold the Tone button down while 
powering the unit on. Repeat the process to return to latching mode. 
Changing the Batteries
Harmony Singer 2 can operate on 4 AA batteries. Remove the single screw on 
the bottom of the pedal to open the battery door. Make sure to observe correct 
polarity when inserting the batteries.
Auto Gain
Harmony Singer 2 will automatically adjust the gain setting for your microphone, 
eliminating the need for manual adjustments and ensuring that a good signal is 
passed to the mixer without any unwanted distortion.
24 V Phantom Power
Phantom power is always active on the Harmony Singer 2. This will power 
condenser microphones, but will not affect dynamic mics either.
Mic Control
Mic Control allows you to control the effect's on/off status via an  
MP-75 microphone. Press and hold the footswitch while powering up the unit 
 
to toggle Mic Control. 
Note that when using a condenser microphone, Mic Control should be disabled to 
prevent unwanted on/off switching.
Icon Name Interval
High3rd above
Higher5th above
High and Higher3rd above
5th above
Low
4th below
Lower6th below
Low and Lower4th below
6th below
Higher  and Lower5th above
6th below
High and Low
3rd above
4th below  
						

							6Harmony Singer 2 User Manual
3.Specifications
Input  
Mic Input Impedance:  Bal anced: 2.68 kOhm
Mic Input Level @ 0 dBFS:  -42 d Bu to +1 dBu
EIN @ Max Mic Gain Rg = 150 Ohm:  -126 dBu
Mic input SNR: >10 4 dB
Guitar Input impedance: 1 MOhm
Guitar Input Level @ 0 dBFS: -7 dB U to 17 dBu
Guitar Input SNR: >115 dB
Output
Output Impedance, Bal./Unbal.:  200/100 Ohm
Output Full Scale:  +1 dB u
Dynamic Range:   >104 dB, 20 Hz to 20 kHz
Frequency Response: +0/-0.3 dB, 20 Hz to 20 kHz
Power
Power Supply (Supplied):  9 V / 670 mA
Power Consumption: 
6 W
Requirements
Operating Temperature: 32° F t
o 122° F (0° C to 50° C)
Storage Temperature: -22° F to 167° F (-30° C to 70° C)
Humidity Max.: 90 % no n-condensing
Size & Weight
Dimensions: 5.4" x 3.5" x 2.3" (140 x 90 x 60 mm) Weight: 0.92 lb. (420 g)
Warranty For the applicable warranty terms and conditions and additional information 
regarding MUSIC Group’s Limited Warranty, please see complete details 
online at music-group.com/warranty. 
Due to continuous development, these specifications are subject to change 
without notice 
						

							7Harmony Singer 2 User Manual