Home > Sim2 Multimedia > Projector > Sim2 Multimedia Projector Rpu 301hb Specifications

Sim2 Multimedia Projector Rpu 301hb Specifications

    Download as PDF Print this page Share this page

    Have a look at the manual Sim2 Multimedia Projector Rpu 301hb Specifications online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 69 Sim2 Multimedia manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							The SIM2 DLP™ Rear-projection engines for Data and Video Input signals
    deliver the highest contrast, best image quality, operational reliability,
    serviceability to display your image 24/7/365.
    Best image quality
    The RPU 301-301HB incorporates innovative, DLP™ Single Chip technology for
    a superb image quality. The new LVDS - 12° Chip enables the RPU 301-301HB
    to deliver both an impressive and superb contrast, resulting in a perfect image
    quality.  It delivers outstanding color and brightness uniformity.
    All under control
    With SIM2 Software, you can easily set the rear-projection parameters and
    control your videowall. The SIM2 EasyWall new software allows you to set all
    the parameters (contrast, brightness, colorimetry etc.) and construct a simple
    configuration.
    Reliability
    The inherent durability of the DMD ensures low power dissipation, long
    lasting operations and “burn-in” effect free display at any time. The dual lamp
    system guarantees the total efficiency of your Videowall and the lamp
    change is automatic, made without the intervention of the operator. The
    second lamp brings redundancy to the system and guarantees an image at
    all times, in fact the redundant lamp starts up after lamp failure of the
    master lamp in about 30 seconds. The RPU 301-301HB is designed to
    reliably work in 24h/7/365 days facilities. 
    Easy installation
    The rear-projection engine is packaged in one single carton box. The gross
    weight is around 13,5 Kg. The low net weight allows you to manage and
    install it very easy.
    Maintenance
    Easy operations allow technicians, installers and Engineers to access the
    inside of the engine for lamp and electronics and optics replacement,
    minimizing downtime for service and maintenance. Key Points
    -  1-Chip DLP™ digital technology
    rear-projector
    -  SXGA+ (1400x1050) native 
    resolution, software selectable
    -  New LVDS Chip2 - 12° for an 
    excellent contrast ratio (2000:1) 
    -  Aspect ratio 4:3 
    -  Excellent white uniformity
    -  Dual lamp system
    -  New WA lens (Wide Angle), 
    telecentric, multi elements
    -  Wide band input board (270
    MHz)
    -  New CCTRL32
    -  New DVI input
    -  New robust RS485 control plus
    RS232 control. USB as optionRPU 301-301HB 
    						
    							PROJECTION SYSTEM
    Technology: DLP™ - 1 chip DMD LVDS Chip - 12°
    DMD Panel resolution: 1400x1050 (SXGA+)
    Aspect Ratio (W:H) : 4:3
    Optical lens:  WA 0,737:1
    Rear-projector Brightness : RPU301:~700 ANSI lm (100% white field @ 8000°K)
    RPU301HB:~900 ANSI lm (100% white field @ 8000°K)
    Uniformity: > 90% ANSI measurement
    Contrast ratio: 2000:1 full on/full off
    Number of colors: 16,777,216 colors
    Color Temperature:6500°K - 12000°K adjustable, 3500°K reachable
    Lamp Type: dimmable 120 W  
    Average life: 120W 6.000 hrs* (x2), 10.000 hrs in a 100W configuration (50%
    survival @50% integral lm maintenance)
    ELECTRONICS
    Horizontal frequency: 15KHz - 110 KHz
    Vertical frequency : 48 Hz - 120 Hz (55 Hz - 65 Hz frame lock mode)
    Analog bandwidth: 170 MHz @ -3dB for graphic signals, 8 MHz @ -2dB for video
    signals
    Graphic Standard: from VGA (640x480) to UXGA (1600x1200) with internal scaling
    Video Standard: automatic decoding PAL, NTSC, SECAM
    Internal magnification: from 0,75x to 16x
    INPUT/OUTPUT SIGNALS
    Graphic Inputs: 
    1 x RGB+HV (or YPrPb) on 75 ohm BNC connectors
    1 x RGB+HV on HD15 connector
    Video Inputs: 
    1 x CVBS + S (in/out) on 75 ohm BNC connectors
    1 x S-VIDEO (in/out) on miniDIN4 connectors
    ATSC HDTV is also supported on BNC or HD15 or DVI connectors
    DVI Input / Output: Analog RGBHV (or YPrPb) + Digital RGB
    Control Interface: Serial Interface RS232C or RS485 on DB9 in/out connectors or
    USB (on request) for control from a remote PC; IR remote control handset (on
    request)
    ELECTRICAL DATA
    Main Power Supply: 100 Vac - 240 Vac +/- 10%; Line Frequency 48 - 62 Hz
    Power Consumption: Max 185 W (160 Kcal/h)
    Max Current Absorption: @120V:1,5 Arms @230V:0,8 Arms, 
    Max Inrush Current:30A
    Fuse:  T 3.15A H 5x20 mm located on the rear-projectorMECHANICAL DATA
    EngineDimension: 476x277x239 mm (WxHxD)  
    Package dimension:620x385x423 mm (WxHxD)
    Gross weight: 13,5 Kg. with all accessory
    ENVIRONMENTAL DATA
    Ambient Temperature: Operating from 0° to +35°C, 
    Storage and Transportation from -10°C to +55°C
    Humidity: from 10% HR to 90% HR (without condensation)
    Max Altitude: Operating 4.000 m, Transport 11.000 m
    Installation Position: vertical, max number of stackable units 4 (without support
    stucture)
    SAFETY & REGULATORY DATA
    Drop Test:in compliance with UNI EN 22247 and 22248
    Safety: in compliance with EN 60950
    EMC emission: in compliance with EN 55022
    EMC immunity: in compliance with EN 55024
    ACCESSORIES
    Easywall: PC based control software suite
    CCTRL32: New color balance feature.
    RC 2000: Remote Control Handset p/n 790010000SIM2 Multimedia is
    certified(*) Lamp life: the hours have been  calculated under strict test conditions. Misuse or improper operating conditions may alter it.
    Digital Light Processing™ and DLP™ are registered trademarks of Texas Instruments.
    Due to constant product development, specifications and design might be subject to change without notice. RPU 301-301HB - World - January 2006RPU 301-301HB
    Headquarters:
    SIM2 MULTIMEDIA S.p.A.
    Viale Lino Zanussi, 11
    33170 Pordenone - Italy 
    Tel. +39.0434.383217
    Telefax +39.0434.383261 
    E-mail: [email protected] 
    Web site: www.sim2.comGermany: 
    SIM2 DEUTSCHLAND GmbH
    Industriepark, 17
    D-56291 Wiebelsheim
    Tel. +49.0700.40050066
    Fax. +49.0700.70080099
    E-mail: [email protected]
    web site: www.sim2de.comUK: 
    SIM2 UK LTD 
    Steinway House, Worth Farm
    Little Horsted, Nr. Uckfield
    East Sussex TN22 5TT
    Tel. +44.01825.750850
    Telefax +44.01825.750851
    E-mail: [email protected]: 
    SIM2 USA INC.
    10108 USA Today Way
    Miramar, FL 33025
    Tel. +1.954.442.2999
    Telefax +1.954.442.2998
    E-mail: [email protected]
    Web site: www.sim2usa.comrear-projection enginesConnectors panel TECHNICAL SPECIFICATIONS 
    						
    All Sim2 Multimedia manuals Comments (0)

    Related Manuals for Sim2 Multimedia Projector Rpu 301hb Specifications