Sim2 Multimedia Projector Rpu 251 Specifications
Have a look at the manual Sim2 Multimedia Projector Rpu 251 Specifications online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 69 Sim2 Multimedia manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Headquarters: SIM2 MULTIMEDIA S.p.A. Viale Lino Zanussi 11 33170 Pordenone - Italy Tel. +39.0434.383253 Fax. +39.0434.383261 email: [email protected] USA: SIM2 SELECO USA Inc . 10108 USA Today Way 33025 Miramar FL - USA Tel. +1.954.442 2999 Fax. +1.954.442 2998 email: [email protected] www.sim2usa.com Germany: SIM2 DEUTSCHLAND GmbH Gewerbepark, 17 35606 Solms - Germany Tel. +49-800-8007462 Fax. +49-800-9007462 email: [email protected] www.sim2.com SIM2 Multimedia is certified RPU 201-251 Rear-projection Engines “The Best Image for Large Screens” RPU 201-251 Technical specifications RPU 201 RPU 251 Technology DLP TM - 1 chip DMD TM 0,7 10° DLP TM - 1 chip DMD TM 0,7 10°DMD™ Panel Resolution 800 X 600 (SVGA) 1024 x 768 (XGA)Aspect Ratio (W:H) 4:3 4:3Rearprojector Brightness 530 ANSI lm (100% white field @ 11000°K) 600 ANSI lm (100% white field @ 11000°K)Uniformity > 80% ANSI measurement > 80% ANSI measurement Contrast Ratio > 250:1 ANSI checkerboard pattern > 400:1 full on/full off > 250:1 ANSI checkerboard pattern > 400:1 full on/full offColour no. 16,777,216 colours 16,777,216 coloursColour Temperature 8000°K - 12000°K adjustable 8000°K - 12000°K adjustableLamp Type UHP 120 W/VIP 120W UHP 120 W/viIP 120W Average Life 6000 hours 6000 hours (50% survival @50% integral lm maintenance) (50% survival @50% integral lm maintenance)Horizontal Frequency 15KHz - 110 KHz 15KHz - 110 KHzVertical Frequency 48 Hz - 120 Hz 48 Hz - 120 Hz Analog Bandwidth 170 MHz @ -3dB for graphic signals; 170 MHz @ -3dB for graphic signals; 8 MHz @ -2dB for video signals 8 MHz @ -2dB for video signals Graphic Standards from VGA (640x480) to UXGA (1600x1200) from VGA (640x480) to UXGA (1600x1200) with internal scaling with internal scalingVideo Standard automatic decoding PAL, NTSC, SECAM automatic decoding PAL, NTSC, SECAMInternal Magnification from 0,75x to 16x from 0,75x to 16x Graphic Inputs 1 x RGB+HV (or YPrPb or 1 CVBS) 1 x RGB+HV (or YPrPb or 1 CVBS) on 75 ohm BNC connectors on 75 ohm BNC connectors 1 x RGB+HV on HD15 connector 1 x RGB+HV on HD15 connector Video Inputs 1 x CVBS + S (in/out) on 75 ohm BNC connectors 1 x CVBS + S (in/out) on 75 ohm BNC connectors 1 x S-VIDEO (in/out) on miniDIN4 connectors 1 x S-VI DEO (in/out) on miniDIN4 connectors ATSC HDTV is also supported on BNC ATSC HDTV is also supported on BNC or HD15 or DVI connectors or HD15 or DVI connectors DVI Input / Output DVI 1.0 specification Analog RGBHV (or YPrPb) + Digital RGB; Analog RGBHV (or YPrPb) + Digital RGB; single link up to 165MHz Active Loop Through for the digital link Active Loop Through for the digital linkControl Interface Serial Interface RS232C or RS485 on DB9 in/out Serial Interface RS232C or RS485 on DB9 in/outconnectors or USB (on request) for control from a connectors or USB (on request) for control from aremote PC; remote PC;IR remote control handset (on request) IR remote control handset (on request)Main Power Supply 100 Vac - 240 Vac +/- 10%; 100 Vac - 240 Vac +/- 10%;Line Frequency 48 - 62 Hz Line Frequency 48 - 62 HzPower Consumption Max 185 W (160 Kcal/h) Max 185 W (160 Kcal/h)Max Current Absorption @ 120V: 1,5 Arms @ 230V: 0,8 Arms @ 120V: 1,5 Arms @ 230V: 0,8 ArmsMax Inrush Current 30 A Max Inrush Current 30 AFuse T 3.15A H 5x20mm T 3.15A H 5x20mmMains Loop-Through @ 120 V: max 5 units; @ 230 V: max 10 units @ 120 V: max 5 units; @ 230 V: max 10 unitsRPU Engine box dimensionsmm 333 x 181 x 236 (WxHxD) mm 333 x 181 x 236 (WxHxD)Total Weight Kg. 12 Kg. with all accessories Kg. 12 Kg. with all accessoriesPackage Dimensions mm 412 x 290 x 412 (LxHxP) mm 412 x 290 x 412 (LxHxP)Exhaust Air 48 °C (@ 35°C environment) 48 °C (@ 35°C environment) Ambient Temperature Operating from 0° to +35°C Operating from 0° to +35°C Storage and Transportation from -10°C to +55°C Storage and Transportation from -10°C to +55°CHumidity from 10% HR to 90% (without condensation) from 10% HR to 90% (without condensation)Max Altitude Operating 4000m; Transportation 11000m Operating 4000m; Transportation 11000mInstallation Position Standard: horizontal (based on the rubber feet); Standard: horizontal (based on the rubber feet);vertical (with a vertical projection lens axis). vertical (with a vertical projection lens axis).Allowable: tilt around the lamp axis: from 0° to 360° Allowable: tilt around the lamp axis: from 0° to 360°tilt of the lamp axis from -10° to 10° tilt of the lamp axis from -10° to 10°Standards Drop Test in compliance with IEC 68-2-31, IEC68-2-32 in compliance with IEC 68-2-31, IEC68-2-32Safety in compliance with EN 60950, UL60950 in compliance with EN 60950, UL60951EMC emission in compliance with EN 55022, EN61000-3-2/3 in compliance with EN 55022, EN61000-3-2/4EMC immunity in compliance with EN 55024, EN61000-4- in compliance with EN 55024, EN61000-4-2/3/4/5/6/8/11, ENV 502047 2/3/4/5/6/8/11, ENV 502048 Accessories RPU 201 RPU 251 Easywall 3 PC based control software suite PC based control software suiteRC 2000 Remote Control Handset p/n 790010000 Remote Control Handset p/n 790010000 Digital Light Processing, DLP and DMD are registered trademarks of Texas Instruments. Due to constant p roduct development, specifications and design might be subject to change \ without notice. RPU 201-251 - World - May 2003
Key Points 1-chip DLP™ digital technology rear projector Choice of SVGA (800x 600) or XGA (1024x768) native resolution Excellent contrast ratio (400:1) Aspect Ratio 4:3 Long life lamp (6000 hrs) Lamp-flicker free display Wide band input board (270 Mhz) New DVI Input New robust RS 485 control, plus RS232 control. New enhanced image processing Mechanical dimension compatible with RPA RPU 201-251 Dimensions Datawall Projection Module The SIM2 DLP™ Rear-projection engines for Data and Video Input signals deliver the highest contrast, best image quality, operational reliability, serviceability to display your image 24/7/365. Best image quality The RPU 201-251 incorporates innovative, DLP™ Single Chip technology for a superb image quality. It delivers outstanding color and brightness uniformity. All under control With SIM2 Software, you can easily set the rear-projection parameters and control your videowall. The SIM2 EasyWall 3.0 software allows you to set all the parameters (contrast, brightness, colorimetry etc.) and construct a simple configuration. Reliability The inherent durability of the DMD™ and the long average life of 120 W UHP lamp ensures low power dissipation, long lasting operation and “burn-in” effects free display at any time. The RPU 201-251 series are designed to reliably work in 24h/7days facilities. Easy installation The rear-projection engine is packaged in one single carton box. The gross weight is around 12 Kg. The low net weight allows you to manage and install it very easy. Maintenance Easy operations allow technicians, installers and Engineers to access inside the engine for lamp, electronics, optics replacement, minimizing downtime for service and maintenance. 333224 11 11 169,5 170 230 35 Rear Controller Panel R/Pr/ CVBS2 G/Y/ CVBS3 B/Pb/ CVBS4RS485 LOOP V SYNCRS485 75Ω USBS TAT U S RS232 H/H+V SYNCRGB HV YPrPb ANALOG SYNC IN OUT OFF ON OFF ON IN OUT S-VIDEO 75 Ω CVBS 75 Ω CVBS1INOUTS-VIDEO DVI-I OUT DVI-I IN Digital Micromirror Device Pixel configuration DMD™ working principle and configuration The DLP™ Technology Digital Light Processing™ is a new way to project and display video signals and is based on the Digital Micromirror Device™ developed by Texas Instruments. The inherent digital nature of DLP™ enables noise-free, precise image quality with digital gray scale and very good colour reproduction. Finally, close spacing of the micromirrors causes video images to be projected as seamless pictures with higher perceived resolution. DLP™: How It Works A DMD™ can be described simply as a semiconductor light switch. Thousands of tiny, square, 16 x 16mm mirrors, fabricated on hinges atop a static random access memory (SRAM) make up a DMD™. Each mirror is capable of switching a pixel of light. The hinges allow the mirrors to tilt between two states: on or off. One-Chip DLP™System SIM2 Multimedia has chosen to use the one-chip technology solution for its range of products. In a single-DMD™ projection system, a colour wheel is used to create a full-colour projected image. The colour wheel is a red, green, and blue filter system that spins at 60 Hz to give 180 colour fields per second (256 shades for each of the primary colours, or 256∆- 16.7 million - possible colours that can be generated).