Sim2 Multimedia Ht300 Projector User Manual

HT 300
1
ENGLISH
USER AND INSTALLATION MANUAL
( ANNEX )
  5 PROJECTOR DESCRIPTION
Dimensions (mm)  (Fig. 18a):
350
185
318
Fig. 18a
N.B. The height includes the bottom feet.
Distances from the center of lens (mm)  (Fig. 18b):
249
11 8
ø67
Fig. 18b
  7 PROJECTION DISTANCES HT 300
Screen Screen Screen
size width width
(diagonal)min max min max
in. m in. m ft. in. m ft. in. m in. m ft. in. m ft. in.
50 1,0 40 2,4 8 0 3,4 11 0 1,1 44 2,0 6 6 2,7 9 0
60 1,2 48 2,9 9 7 4,0 13 2 1,3 52 2,4 7 10 3,3 10 9
70 1,4...

HT 300
2
  13 MENU DESCRIPTION
To access the main On Screen Display menu, press the
Menu key on the keyboard or the key Menu + or Menu -
on the remote control 
(Fig. 46).
Fig. 46
The main menu is divided into four sections to cover va-
rious adjustments in a practical and logical manner.
The on-screen menu layout is dependant upon the cho-
sen input signal so various options may not be applica-
ble, i.e. some typical adjustments to the video signal are
not applicable to the graphic RGB signals from PC...

HT 300
3
ENGLISH
 13.2 IMAGE ADJUSTMENTS
This menu features adjustments relating to position,
aspect ratio and magnification etc.
POSITION
ASPECT
ADVANCED SETTINGS
MAGNIFICATION IMAGE ADJUSTMENTS
VIDEO
ASPECT
FREQUENCY/PHASE
ADVANCED SETTINGS
MAGNIFICATION
POSITION IMAGE ADJUSTMENTS
MODE4:316:9
RGB
13.2.1 POSITION
Use this adjustment to position the image vertically and
horizontally.
HORIZONTAL: 9
VERTICAL:   6
13.2.2 ASPECT
Determines the aspect ratio of the projected image.
From this menu it is...

HT 300
4
13.2.3.2 Phase
The phase adjustment determines the stability and
sharpness of the vertical lines in the projected image.
13.2.5 ADVANCED SETTINGS
Advanced colour settings are accessible via this menu.
2
GAMMA CORRECTION
GAMMA CORRECTION
Y/C DELAY ADVANCED SETTINGS
VIDEO
COLOR TEMPERATURE
GAMMA CORRECTION ADVANCED SETTINGS
RGB
We recommend the use of these settings only to the
experienced user, as their adjustment can seriously affect
final image quality. However it is possibile to return to...

HT 300
5
ENGLISH
   13.3 SETUP
The installation menu gives access to features that will
allow for correct installation of the projector.
ORIENTATIONKEYSTONE
PROJECTION LENS
TEST PATTERNS
FACTORY DAFAULTS SETUP
13.3.1 ORIENTATION
Select the option that best describes the installation i.e.
desktop front, ceiling frontdesktop rear, and ceiling rear.
FLOOR
CEILING
FLOOR-REAR
CEILING-REAR
ORIENTATION
13.3.2 HORIZONTAL / VERTICAL KEYSTONE
If the projector is at an angle in relation to the screen,
keystone...

HT 300
6
VIDEO
RGB
13.3.5 FACTORY DEFAULTS
Reconfigures the projector to original factory settings:
except Position, Orientation, Y/C Delay, Zoom and Fo-
cus.
NoConfirm?
Ye s
  13.4 MENU
This menu covers the On Screen Display adjustments.
LANGUAGE
OSD POSITION 
OSD BACKGROUND15 sec MENU
OSD TIMEOUTClearSolid
13.4.1 LANGUAGE
Lists the languages options available for the On Screen
Display menus.
ENGLISH
ITALIANO
FRANCAIS LANGUAGE
DEUTSCH
ESPANOL
PORTOGUES
13.4.2 OSD POSITION
To position the On Screen...

HT 300
7
ENGLISH
 15 INPUT SELECTION
The Input Selection menu is recalled by pressing the
key: O/AV of the remote control. During normal display,
press Up Arrow key and Down Arrow key of the keyboard
pad. The input selected will be highlighted in yellow.
When change the input a dialog box will appear on the
screen for a few seconds with the following indications:
selected input,  standard video (for video signals)
resolution (for graphic signals) and aspect 
(Fig.49).
Video
NTSC/60Hz
Normal
Input...

HT 300
8
  21 TECHNICAL SPECIFICATIONS
OPTICAL CHARACTERISTICS
Projection system: optical engine based on 1 DMD    chip, sealed housing, dusty proof
DMD panel: resolution 1280 x 720 pixel
Brightness uniformity: > 90%
Contrast ratio: > 1000:1 “full on / full off”
Projection lens:zoom, 12 elements AR multilayer coating, motorized focus and zoom, manual elevation
Aperture f#: 2.7 (zoom min) - 3.3 (zoom max)
Picture size: 50-250 inches (diagonal measure)
Aspect ratio: 4/3 and 16/9 (native)
Throw ratio: 1,8:1...

HT 300
9
ENGLISH
Video processor: DTI, CTI, comb filter, noise reduction.
Sharpness, Y/C delay and NTSC tint adjustments
Remote control: via infrared remote control and via computer through RS232 serial interface
Remote inputs: via Remote Inputs Interface (optional) and cable with EVC connector
Low Voltage Power Output:two 12 Vdc output, 100 mA max on jack connectors
GENERAL
Supply: from 100 to 240 Vac, - 10% + 6% tolerance
Frequency: from 48 to 62 Hz
Consumption: 200 W max
Fuse: T 3.15A H, 5 x 20 mm...