Sim2 Multimedia Ht300 E Projector User Manual

11

Frequency of  between 32-80  kHz and a  Vertical frequency of 
between 48-100 Hz. Computer Resolutions of VGA, SVGA, XGA, 
SXGA and UXGA can be displayed. 
HDMIAUDIO
OUTZOOM
CONTROL (RS 232) GRAPHICS RGB
R/Cr
G/Y
B/Cb
HV
12
435
et de mems caracteristiqueCAUTION: for continued protection agains t 
risk of fire, replace 
only with same type 
and rating fuse.
Fig. 19
RGB/YCRCB INPUT 
DIGITAL 
INPUT AUDIO
OUT
CONTROL (RS 232) GRAPHICS RGB
R/Cr
G/Y
B/Cb
HV
35
ATTENTION: pour ne pas compromettre 
la...

12

care  to  observe  the  correspondence  with  the  outputs  on  the 
source. The video signals that can be connected to this input 
can have horizontal scanning frequencies of 15 kHz (standard 
video  resolution),  32  kHz,  or  higher  (progressive  scanning 
video, high definition video). 
Some  sources  provide  the  facility  to  choose  between  a  pro
-
gressive signal or an interlaced signal. Although in general a 
progressive signal is higher quality than an interlaced signal, 
it is often...

13

7   KEYBOARD PAD
Freccia Su/Giù/Sinistra/Destra
Navigate through and make  adjustments to the  On Screen menus.  
Arrow Up/Down switch on from stand-by and  recall Source Selection menu..
  
Switches off to stand-by.Menu
Activates  the  On  Screen  Display  menus.  Navigates 
Menu pages.
-Focus-Esc
De-activates  the  On  Screen  Display    and  gives  access  to 
the lens   Zoom/Focus adjustment functions.
Auto
Selects Auto Adjust
(automatic  optimisation  of  the 
displayed image).
Eight push...

14

8   REMOTE CONTROL
Insert the batteries, taking care to match the polarity, as indi-
cated in the battery recess of the remote 
(Fig. 24).
                 
+-
+-
+-
+-
Fig. 24
Change  the  batteries  in  the  remote  control  if  experiencing 
difficulty in sending commands to the projector.
If the remote control is not to be used for a long period of time 
remove the batteries. Replace all batteries at the same time; do 
not replace one new battery with a used battery. If the batteries 
have...

15

Inputs
1  VIDEO
2   S-VIDEO 
3  
COMPONENT/RGBS4   GRAPHICS  RGB
5   HDMI 1  
2  
3 
4 
5  
15kHzRGBS 
Inputs
1  
VIDEO
2   S-VIDEO 
4   GRAPHICS  RGB
5   HDMI 1  
2  
3 
4 
5  
15kHz
RGBS 
   
3  
COMPONENT/RGBS   YCrCb AutoSync
   YCrCb 15KHz
YCrCb
RGB AutoSyncRGB 15KHz
RGB

Fig. 26a
Fig. 26b
9  ON SCREEN MENU
After  selecting  the  source  signal  (by  means  of  the ·  and ‚ 
keys), press 
MENU+/MENU - to confirm and close the pull-down 
menu; the value you have just set will be displayed on the...

16

Fig. 28b
Fig. 28a
Other adjustments (marked by the < symbol) provide subme
-
nus,  which  appear  as  a  superimposed  window  in  which  the 
selection is made with the · / ‚keys (Fig. 28). be separately identifiable. Alternatively use a scene composed 
of black objects alongside other dark coloured objects.
CONTRAST
Use  this  control  to  adjust  the  image’s  black  level  without  af-
fecting white areas.To ensure correct adjustment, it may prove 
useful  to  display  the  signal  relative  to...

17

BRIGHTNESS
CONTRAST
Video
S-Video RGBS
YCrCbRGB Grafico HDMI™ RGBS 15kHz
YCrCb 15kHzADJUSTEMENTS INPUTS
COLOR--
-
--
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
TINT(NTSC)
SHARPNESS
SHARPNESS MODE
FILTER
Adjustable/can be set Not adjustable/can not be set
CINEMA MODE 
VIDEO TYPE
FLESH TONE CORRECTION NOISE REDUCTION
-
-
-
-
-
-
-

TABLE 1 - INPUT SIGNALS AND ADJUSTABLE/SETTING ITEMS
CINEMA MODE
In AUTO the deinterlacer recognises if the video signal source  
is a movie film (obtained from a Telecine device...

18

IMAGE
This  menu  features  adjustments  relating  to  picture  position, 
aspect ratio, etc.
ASPECT
This  adjustment  allows  you  to  change  the  dimensions  and 
aspect  ratio  (relationship  between  width  and  height)  of  the 
displayed image. There are five preset aspects available and 
three  personalised  aspects  (with  user-settable  parameters). 
You can select a different aspect for each source: the selected 
aspect ratio will be automatically called the next time the relative 
source...

19

Along  vertical  lines  the  color  temperature  is  constant  but  is  
different    from  black  body  curve,  which  mean  if  you  select 
point from the high part of the  diagram you increase the green 
componet,  while  low  part  of  diagram  cause  an  increase  of 
purple component.
GAMMA CORRECTION
Determines the system’s response to the grey scale, emphasi-
sing or attenuating the different grades of brightness (blacks, 
dark, medium, light grey, whites) in the projected image. 
There...

20

SETUP
The setup menu contains less frequently used adjustments that 
may  be  required  during  installation  (e.g.  On  Screen  Display 
language selection or the display of Test Patterns).
ORIENTATION
Select the option that best describes the installation i.e. desktop 
front, ceiling front, desktop rear and ceiling rear..
DIGITAL 
INPU T AUDIO
OU TZOOMCONT
ROL (RS  232)
GRA
PHICS  RG
BR/C r
G/Y
B/Cb
HV12435ATTE NTION
: pou
r ne pas co mprome
ttre 
l a
 protection  contre les resque d'incen
de...