Sim2 Multimedia Ht200 Dmf Projector User Manual

11
ENGLISH
REMOTE INPUT INTERFACE CONNECTING CABLE
With a special cable (optional), it is possible to connect the Re-
mote Input Interface (optional) to the projector.
Connect/disconnect the special Remote Input Interface cable
only when the projector is switched off and disconnected from
the mains (switch in position O).
CAUTION: This is not a VESA “Plug & Display” connector.
Never connect a computer to this socket as the projector
and the computer may be damaged 
(Fig. 23).
Fig. 23
MOTORISED PROJECTION...

12
6   KEYBOARD PAD
Up/Down/Left/Right arrow keys
Navigate through and make  adjustments
to the On Screen menus.
Arrow Up/Down switch on from stand-by
and recall Source Selection menu.
Switches off to stand-by.Menu
Activates the On Screen Display menus.
Navigates Menu pages.
-Focus-Esc
De-activates the On Screen
Display  and gives access to the
lens Zoom/Focus adjustment
functions.Auto
Selects Auto Adjust
(automatic optimisation of the
displayed image).
7   REMOTE CONTROL
The remote control sends...

13
ENGLISH
Not active
in this model.
MENU -
Activates  the On Screen
Display menus.
Navigates menu pages.
FREEZE
Freezes a moving
picture.
FOCUS
Selects focus
lens adjustment.STAND-BY
Switches off to stand-by.
0-9 Keys
Switch on from stand-by
and allow direct source
selection.
MENU +
Activates  the On Screen Display menus.
Navigates menu pages.
INFO
Displays the selected source information 
and the projector status.
VCR
Improves the video recorder
signals quality.
ASPECT
Selects image Aspect ratio....

14
8   ON SCREEN MENUS
Fig. 29
PICTURE
This menu features adjustments relating to the projected image
quality.
BRIGHTNESS
CONTRAST
COLOR
SHARPNESSFILTER20
50
50
7
6
CINEMA MODEOff
PICTURE
AutoVIDEO TYPENormalVCR
VIDEO
BRIGHTNESS
CONTRAST
COLOR20
50
50 PICTURE
TINT 85SHARPNESSFILTER7
6
CINEMA MODE OffAutoVIDEO TYPENormalVCR
VIDEO-NTSC
BRIGHTNESS
CONTRAST50
20 PICTURE
SHARPNESS 5
SHARPNESS MODEVideoGraphics
RGB
BRIGHTNESS
Use this control to adjust the image’s black level.
CONTRAST
Use this control to...

15
ENGLISH
TINT
Controls the purity of the colours, to NTSC coded signal
standards. Tint is only applicable to video input with NTSC
standard, to RGB 15kHz and YCrCb 15kHz inputs and YCrCb
32kHz (no RI2).
SHARPNESS
Use this adjustment to increase and decrease the level of picture
detail.
SHARPNESS MODE
It allows to select the type of processing that determines the
detail. In progressive or de-interlaced video signals the Video
option is suggested, with graphic signals from a PC the Graphic
option is...

16
User 1, 2, 3
Should you wish to use a format different to those preset, go to
User menus.
ASPECT / USER 1
HORIZONTAL
VERTICAL
SCREEN CONTROL0
-10
OnOff
By using the Horizontal and Vertical adjustments it is possible
to select the screen shape of your choice. It is important to keep
the relation between height and width so that the correct aspect
ratio can be maintained.
Screen Control. If an appropriate screen-masking interface is
connected to the 12V output socket “
”  it is possible to re-
frame the...

17
ENGLISH
(the magnifying lens icon  will appear at the centre of the
image).
Select  Pan (zoom button on the remote control) to choose
the area of image to enlarge, using all four arrow keys.
Via remote control, it is possible to alternate between modes,
by pressing the 
 key.
SETUP
The installation menu gives access to features that will allow
for correct installation of the projector.
ORIENTATIONKEYSTONE
PROJECTION LENS
TEST PATTERNS
FACTORY DEFAULTS SETUP
ORIENTATION
Select the option that best...

18
TEST PATTERNS
Displays a series of five test patterns, useful for the installation
of the projector.
Press Up and Down Arrow  keys to browse pattern.
FACTORY DEFAULTS
Reconfigures the projector to original factory settings except
Position, Orientation, Y/C Delay, Zoom and Focus.
NoConfirm?
Ye s
MENU
This menu covers the On Screen Display adjustments.
LANGUAGE
OSD POSITION 
OSD BACKGROUND15 sec MENU
OSD TIMEOUTClearSolid
LANGUAGE
Lists the languages options available for the On Screen Display
menus....

19
ENGLISH
10   TROUBLESHOOTING GUIDE
specifications of the projector.
- Check the integrity of cables used to connect various sources.
- If you are using the Remote Input Interface, do not to confuse
the menu for selection of projector’s inputs (Source Selection),
with the menu for selection of remote inputs (Source Selection
/ RI2).
Image is disturbed, unstable or noisy
- Verify compatibility of video/graphic signals with the technical
specifications of the  projector.
- Check the integrity of cables...

20
adjustments.
- Adjust the horizontal and vertical position of projected image
by selecting  Position on the Image Adjustments menu.
- Adjust the width and height of image, selecting Aspect in the
Image Adjustments menu.
Image too dark, too pale or unnaturally coloured
- Verify compatibility of video/graphic signals with technical
specifications of your projector.
- Go to Picture menu, select and regulate any of the following,
accordingly: Contrast, Brightness, Color, and Tint.
- If necessary, reset...