Sim2 Multimedia Domino D80e Projector User Manual

21
TEST PATTERNS
Displays  a  series  of  five  test  patterns,  which  are  useful  when 
installing the system and checking basic functions. Use the ◀ 
and ▶ keys to browse through the test patterns (Fig. 27). 
iNiTiAL SETTiNgS
Reconfigures  the  projector  to  original  factor y  settings  except 
Position, Orientation, Y/C Delay, Zoom and Focus (Fig. 28).
MENUS
LANgUA gE
It  allow  to  select  the  languages  available  for  the  On  Screen 
Display menus.
iNPUTS LiST
In order to make the D80E system...

22
same key as before. Use the ▲ key to switch from upper case 
to lower case characters. Cancel errors with  ▼ once you have 
selected the character in question. Once you have terminated 
the text input procedure confirm your text and save it by pres-
sing the 
MENU+ key on the remote control. If you wish  to cancel the 
modifications, press 
MENU- on the remote control.
f1-f2 keys
The remote control is equipped with two keys (F1 and F2) which 
are associated with various different functions.
The screen...

23
making a total of 24 different available Memories.
The  image  parameters  that  can  be  saved/recalled  by  the 
Memories management system are the following:
               image                     Picture
                    BRIGHTNESS                             ASPECT
                    CONTRAST                             COLOUR TEMPERATURE
                    COLOUR                             OVERSCAN 
                    TINT                             GAMMA 
                    SHARPNESS...

24
Save memory
To  save  the  image  parameter  current  values  in  memor y  1, 
move the cursor to line ‘1’ with the ▼ and  ▲ ‚ keys and open 
the pull-down menu by pressing the  ◀ key (Fig.33). Now select 
Save current settings. To confirm the operation, the message 
Current settings saved in Memor y.
Memories 2...6 can be saved using the same procedure.
 
0  Auto
3       S   MEMORIA 1
-EMORIES
Save current settings
Save initial settings
Rename
2   
     I   1       S   
Fig.33
Recalling a memory
To...

25
iNfO
Displays  the  current  status  of  the  projector  and  information 
concerning the projected video/graphic signal. 
This function is displayed on pressing the 
 key on the remote 
control (or, in the absence of the On Screen Display, the  ▶ key 
on the keypad).
QUiCK MENUS
The quick menus provide access to the main adjustments that 
affect image quality without calling the main menu. Brightness, 
 
CONTRAST , COLOUR, TINT, SHARPNESS
and FILTER adjustments appear at 
the bottom of the screen one...

26
11  TROUBLEShOOTiNg gUiDE
No power (LEDs always Off)
•   Check that the units’ power switches are set to I.
•   Check that the power cables are correctly connected to 
the units’ power sockets.
•   Check  the  condition  of  the  fuse  located  on  the  power 
socket on the rear of the projector.
•   Replace the fuse located on the projector’s power socket with an 
identical type (T 3,15A H).
•   If the fuse blows repeatedly, seek technical assistance from 
your nearest Dealer.
Lamp fails to switch on...

27
You  can  purchase  the  following  optional  accessories  at  your 
Dealer:
- Ceiling mount kit
 
A  range  of  lenses  are  available  from  our  dealers  to  satisfy 
var ying  installation  and  projection  distance  needs.  See  the 
Additional Information chapter for greater details on projection 
distance and enlargement ratios.
12   OPTiONAL ACCESSORiES
Always contact our service centre to have the lens replaced. 
Use only original or SiM2 Multimedia approved accessories.
w arning: for...

28
ELECTRONiCS
input signals: 
	 •	COMPOSITE	VIDEO	(CVBS)
          gold plated RCA connectors 
           1,0 V
pp	/	75	Ω,	negative	synchronisation
	 •	1	S-VIDEO	(Y/C)
                4-pole mini-DIN connector
           Y: 1.0 V
pp	/	75	Ω,	negative	synchronisation	
      C: 0.286 Vpp	/	75	Ω,	[	nominal	NTSC	burst	level]	
      0.3 Vpp	/	75	Ω	[nominal	PAL,	SECAM	burst	level]
	 •	1	COMPONENTS	(Y/Pr/Pb/)	-	RGBS		
      1 set of 4 RCA connectors
         - Component signals  
              Y: 1.0 V
pp	/	75...

29
DiMENSiONS
74 352
174
102
318 

30
Min projection distance
16/9
  2,3   90” 
  2,7   107 ” 
  3,2   126 ” 
  3,6   144 ” 
  4,1   162 ” 
  4,6   180 ” 
  5,0   198 ” 
  5,5   215 ” 
  6,8   2 70” 
  8,2   323 ” 
  9,1   3 60”
  11,4   449”
Max projection distance
  1,1  44” 
  1,3  52” 
  1,6  61” 
  1,8  70” 
  2,0  78” 
  2,2  87” 
  2,4  96” 
  2, 7  105” 
  3,3  13 1” 
  4,0  15 7” 
  4,4  174”
  5,5  217” 
 
m   in.  m   in.  
m             in.
  1,7  66”   
  2,0  79”   
  2,4   93”   
  2,7  106”  
  3,0  119 ”  
  3,4  132”...