Sigarms Sig Sauer Pistol P226 X Five Instructions Manual

18USA19USA
9  Functioning of the pistol 
•The description of functions is not a set of
instructions covering the use, care or repair
of the pistol. Any handling of or treatment
on the pistol based on the following de-
scription of functions is strictly prohibited.
9.1 Function sequence when loading
9.1.1 Magazine inserted
– Full magazine is inserted up to the stop in
the frame.
– Magazine catch 42 has engaged the 
magazine.
Warning
Functioning
8.6 Care of the pistol
•Always keep your pistol in immaculate...

Fig. 17, manual safety
20USA21USA
9.1.2 Function sequence when
loading
– The hammer 7 is cocked as the
slide 50 is drawn back.
– The top round P is thrust up into
the feeding position by the maga-
zine spring 71.
– When slide 50 is released, it flicks
forward with the force of the
compressed recoil spring 62.
– Round P is chambered in the
barrel 57 by the slide 50.
The pistol is ready to fire.
The pistol can be secured by
pushing up the manual safety 29.
Functioning
Fig. 15, round being chambered...

22USA23USA
9.2.3 Function sequence when 
shot is discharged
– Hammer 7 is released.
– Mainspring 15 raises hammer 7 via
hammer strut 13.
– Hammer 7 strikes firing pin 51.
– Firing pin 51 strikes the primer of
round P.
Functioning
Fig. 18, round is discharged
Functioning
51
7
13
15P9.3   Function sequence with ejection of the 
case and automatic reloading
9.3.1 Unlocking
– Blowback force generated with the discharge thrusts
the slide 50 to the rear.
– This separates the safety lever 5, the safety lock...

24USA25USA
9.3.2 Function sequence with case
ejection and hammer cocking
– Sear spring presses sear 2 and
safety lever 5 into their initial
positions.
– The empty case H is removed by
the extractor 53 and expelled by
the ejector 41.
– As the slide 50 recoils up to its
stop, it cocks the hammer 7 and is
then caught in the SA notch by 
the sear 2.
– The slide 50 is pushed forward
with the pressure of the compre-
ssed recoil spring 62 and the next
round is fed in (see section 9.1.2). 
The barrel 57 locks up...

26USA27USA
Hinweis10 Pistol Service and Repairs
10.1 Cause and correction of malfunctions
Malfunctions can be prevented with the proper mainte-
nance of the pistol (cleaning and inspection). Should,
however, a malfunction occur while firing, proceed as 
follows:
•Hold the pistol pointed in the firing direction 
(safe direction) and take your finger from the trigger
while you carry out the steps described below.
1. Remove magazine and deposit safely.
2. Draw slide 50 back until stop and arrest it in the...

28USA29USA
10.2 Safekeeping and storage of the pistol
•Always store your pistol unloaded and in a cleaned
condition.
•Always store your pistol separate from its ammunition
and locked away. The pistol and ammunition must 
always be kept in a place inaccessible to children and
unauthorized persons.
10.3 Shipping the pistol
•Familiarize yourself with all laws and regulations 
governing shipping and transport of firearms. 
1. Check pistol to ensure it is unloaded and decocked.
2. Pack the pistol well (if...

30USA31USA
Hinweis13 Technical
Specifications/Models/Accessories
13.1  Standard model*
Caliber 9 mm Para .40 S&W
Overall length 224  mm 224 mm
Overall height 136  mm 136  mm
Overall width 44 mm  44  mm
Barrel length  127  mm 127  mm
Rifling length 250  mm 380  mm
Number of grooves 6   6 
Sight base 181  mm 181  mm
Weight incl. magazine 1319  g 1319  g
Weight, magazine empty 97  g   97  g
Trigger pull weight 1.0 – 1.6  N 1.0 – 1.6  N
Magazine capacity 15 12Standard model
– SA trigger system
– Adjustable...

32USA33
Spare partsSpare parts
Hinweis
1Frame
2Catch lever
3Catch lever pivot
4Catch lever spring
5Safety lever
6Spiral pin, 2x10
7Hammer
8Cylinder pin, 2.5x6
9Hammer pivot pin
10 Stop
11 Roll pin 2x14
12 Reset spring
13 Hammer strut
14 Mainspring seat
15 Mainspring
16 Trigger
17 Trigger base
18  Trigger spring pin
19 Trigger retainer
20  Trigger retainer pin
21 Guide plate
22 Trigger pressure spring
23 Trigger pivot
24 Trigger bar
25  Trigger bar spring
26  Slide catch lever27 Slide catch lever spring...

34USA
Fig. 23