Siemens Sr 65e000 Operating Instructions
Here you can view all the pages of manual Siemens Sr 65e000 Operating Instructions. The Siemens manuals for Dishwasher are available online for free. You can easily download all the documents as PDF.
Page 31
Fault, what to do?en 31 The door is difficult to open. Child-proof lock is activated. Deactivate childproof lock . (See instructions for use at the back) Door cannot be closed. Door lock has been activated. Cl ose door with increased force. Door cannot be closed due to installation. Check appliance installation: Door or attached parts must close without obstruction. Cover on the detergent dispenser cannot be closed. Detergent dispenser or cover guide blocked by sticky detergent residue....
Page 32
enCustomer service 32 4 Customer serviceCustomer service If you are unable to rectify the fault, please contact your customer service. We always find a suitable solution, even to avoid unnecessary visits by technicians. Contact information for your nearest customer service can be found on the back of these instructions for use or on the enclosed customer service list. When calling, please state the appliance number (E- Nr. = 1) and the production number (FD = 2) which can be found on...
Page 33
Installation and connectionen 33 Delivery Your dishwasher has been checked thoroughly in the factory to ensure that it is in working order. This may cause small water stains. These will disappear after the first wash cycle. Technical specifications Weig ht: max. 45 kg Voltage: 220–240 V, 50 Hz or 60 Hz Connected load: 2.0–2.4 kW Fuse: 10/16 A (UK 13A) Power input: switched off 0.1 W not switched off 0.1 W Water pressure: at least 0.05 MPa (0.5 bar), maximum 1 MPa (10 bar). At a...
Page 34
enInstallation and connection 34 Water pressure: at least 0.05 MPa (0.5 bar), maximum 1 MPa (10 bar). At a higher water pressure: connect pressure-reducing valve ahead. Inlet rate: minimum 10 litres/minute Water temperature: Note printing on the water inlet hose! If models are marked with 25°, the water temperature may be max. 25 °C (cold water). For all other models: cold water preferred; hot water max. temperature 60 °C. Electrical connection
Page 35
Installation and connectionen 35 Transportation Empty the dishwasher and secure loose parts. Drain the appliance according to the following steps: 1. Turn on the tap. 2. Open the door. 3. Switch on ON/OFF switch (. 4. Select programme @ with the highest temperature button < H . 5. Press START button h. 6. Close the door. Programme sequence starts. 7. Open door after approx. 4 minutes. 8. Press START button h for approx. 3 sec. The Cleaning display X goes out. 9. Close the door. The...