Home > Siemens > Dishwasher > Siemens Sr 64e030 Operating Instructions

Siemens Sr 64e030 Operating Instructions

Here you can view all the pages of manual Siemens Sr 64e030 Operating Instructions. The Siemens manuals for Dishwasher are available online for free. You can easily download all the documents as PDF.

Page 11

en
11
Ad
ju
s
tin
g
 th
e
 he igh
t 
o
f th
e
 b
asketAdjusting the height of the 
basket *
* depending on model 
If required, the height of the upper utensils  
basket  1 can be adjusted to provide 
more space for tall utensils either in the  
upper or lower basket. 
Appliance height 81.5 cm 
Select one of the two following procedures  
according to the design of the top basket  
for your appliance model:
Top basket with side levers
– Pull out the top basket  1 out. 
–To  lower the basket, press in the...

Page 12

en
12
You can use tablets as well as powder  
or liquid detergents for dishwashers, but 
never use washing up liquid. The dosage  
can be individually adjusted with powder  
or a liquid detergent according 
to the degree of soiling. Tablets contain 
an adequately large amount of active  
ingredients for all cleaning tasks. Modern,  
pow erful detergents predominantly 
use a low-alkaline formulation with  
phosphate and enzymes. Phosphates  
bond the lime in the water. Enzymes break 
down starch and...

Page 13

en
13
Tip 
If the utensils are only lightly soiled, slightly  
less than the indicated amount 
of detergent is usually adequate.  
Suitable detergents and care products  
can be purchased online via our website 
or via customer service (see back page). 
Combination detergent
Apart from conventional detergents (Solo), 
a number of products are offered with 
additional functions. These products 
contain not only the detergent but also  
rinse-aid and salt replacement substances  
(3in1) and, depending on...

Page 14

en
14
The max. possible number of programmes is illustrated 
in this overview. 
The corresponding programmes for your appliance can be  found on the fascia.
Programme selection
You can select a suitable programme  
according to the type of utensils and 
degree of soiling.
Information for test institutes
Test institutes can request the conditions 
for running comparison tests by sending 
an e-mail to  
[email protected].  
Quote the appliance number (E­Nr.) 
and the production date (FD) which...

Page 15

en
15
* depending on model 
Additional options can be set with the  
buttons 
8.
Express
 W
ash
/ S
peed
 P
e
rf
ec
t (
Var
io
Speed)Ÿ  Express Wash/ Speed Perfect/
(VarioSpeed) *
This function can reduce the running time  
by approx. 20% to 50% depending on the  
selected rinse programme. To obtain  
optimum cleaning and drying results at a 
reduced running time, water and energy  
consumption are increased.
Ï  Intensive zone *Inte
ns
iv
e
 z
on e
Perfect for a mixed load. You can wash  
very soiled...

Page 16

en
16
T
im
er
 p
rogramm
in
gTimer programming *
* depending on model 
You can delay the start of the programme  
by 3, 6 or 9 hours. 
–Switch on ON/OF F switch ( .
– Keep pressing the Preselected starting  time button  0 until the appropriate 
display 3h, 6h or 9h is lit.
– Press START button  h, timer 
programming is activated.
– To delete the preselected starting time,  keep pressing the Preselected starting  
time button  0 until none of the 
displays 3h, 6h or 9h is lit. 
You can change your...

Page 17

en
17
Term
in
a
tin
g
 th
e
 p
r
og r
am meTerminating the programme  
(Reset)
– Open the door.
– Press START button  h for approx. 
3sec. 
The Cleaning display  X goes out.
– Close the door.
The remaining programme sequence  
lasts approx. 1 minute more. (Buzzer  
sounds.)
– Open the door. 
– Switch off ON/OFF switch  (.
– Close the door.
Changing the programme
When the START button  h has been 
pressed, the programme cannot be  
changed. 
The only way a programme can be  
changed is by Cancel programme...

Page 18

en
18
Filters
The filters 1R keep large foreign objects 
in the rinsing water away from the pump.  
These foreign objects may occasionally 
block the filters. 
The filter system consists of a coarse filter,  
a flat fine filter and a microfilter. 
– After each washing cycle check the  filters for residue.
– Unscrew filter cylinder as illustrated  and take out filter system.
– Remove any residue and clean filters  under running water.
– Re-install filter system in reverse  sequence and ensure that the...

Page 19

en
19
The majority of  faults which could occur in  
daily operation can be rectified by the 
user. This ensures that the appliance is  
quickly available for use again. The  
following overview will help you locating 
the causes and gives helpful advise to 
eliminate them. 
Note 
If the appliance stops during dishwashing  
or does not start for no obvious reason, 
first run the Abort programme function 
(Reset).  
(See chapter entitled “Dishwashing”)
ã=Warning
Don’t forget: Repairs may be carried out...

Page 20

en
20
... when the appliance is  
switched on
The appliance does not start.
– The mains fuse has tripped. 
– The appliance plug has not been inserted.
– The appliance door has not been shut  properly.
... on the appliance
Lower spray arm rotates sluggishly. 
– Spray arm blocked. 
The door is difficult to open. * 
– Child-proof lock is activated. The deactivation instructions are at the  
back in the envelope. 
* depending on model
Door cannot be closed. 
– D o o r  l o c k  h a s  b e e n  a c t iv a t e...
Start reading Siemens Sr 64e030 Operating Instructions

Related Manuals for Siemens Sr 64e030 Operating Instructions

All Siemens manuals