Siemens Sr 55m531 Operating Instructions

en21
... when the appliance is  
switched on 
The appliance does not start. 
– The mains fuse has tripped.
– The appliance plug has not been 
inserted.
– The appliance door has not been shut  properly.
... changing settings 
A setting cannot be changed, a  
programme starts. 
– Wrong programme button pressed.  Terminate the programme (see chapter  
entitled “Terminating the programme  
(Reset)”) and start all over again. 
– You did not wait until programme  ended.
... on the appliance 
Lower spray arm...

en 
22
... during the wash cycle 
Unusual foam formation. 
– Handwash liquid in the rinse aid 
dispenser. 
Spilled rinse aid causes excessive  
frothing, therefore please remove with  
a cloth.
Appliance stops during the wash cycle. 
– Power supply interrupted.
– Water supply interrupted.
Filling valves making striking noises 
– Caused by the installation of the water  line and has no effect on the function  
of the machine. Remedial action is not  
possible.
Knocking/rattling noise during rinsing 
–...

en23
If the advice given does not resolve your  
problem, please contact your customer 
service. Contact details can be found on  
the back cover of this instruction manual  
or in the enclosed customer service list. 
When calling , please quote the appliance  
number (1) and the production date  
(FD = 2) which can be found on the rating  
plate 
92 on the appliance door.
Rely on the expertise of the  
manufacturer.   Call us to ensure that the 
repair will be carried out  by fully-trained  
service...

en 
24
– After installing the appliance, ensure 
that the plug is easily accessible. 
(see Electrical connection)
–Some models: The plastic housing on the water  
connection contains an electric valve,  
the connecting cables are in the supply 
hose. Do not cut through this hose,  
do not immerse the plastic  
housing in water.
ã= Warning
If the appliance is not in a cavity and a  
side panel is accessible, the door hinge  
area must be covered at the side 
for reasons of safety (risk of injury).  
The...

en25
Warm water connec
tio
nWarm water connection * 
* depending on model 
The dishwasher can be connected to cold  
or hot water up to max. 60 °C.  
Connection to hot water is recommended  
if the hot water can be supplied  
by energetically favourable means  
and from a suitable installation, e.g. solar  
heating system with circulation line. 
This will save energy and time. 
The hot water setting ‘:‹‚  allows you 
to adjust your appliance optimally  
to operation with hot water. 
It is recommended to...

en 
26
Transportation 
Empty the dishwasher and secure loose  
parts. 
Drain the appliance according to the  
following steps: 
– Turn on the tap. 
– Close the door. 
–Switch on ON/OF
F switch ( . The 
displays of the last selected  
programme light up.
– Select programme with the highest  temperature. 
The expected programme duration is  
indicated on the numerical display  
) .
– Press START button  P.
Programme sequence starts.
– After approx. 4 minutes press the  START button P until  ‹:‹‚  is...

   

   


 
DownloadedfromDishWasherManualcomManuals 

 
 


 








 


 

 
 







 
 


 

 


*9000631728* 
9000631728  en (9108) 440MA