Siemens Sr 24e202 Operating Instructions

en
11
Ad
ju
s
tin
g
 th
e
 he igh
t 
o
f th
e
 b
asketAdjusting the height of the 
basket *
* depending on model 
If required, the height of the upper utensils  
basket  1 can be adjusted to provide 
more space for tall utensils either in the  
upper or lower basket. 
Appliance height 81.5 cm 
Select one of the two following procedures  
according to the design of the top basket  
for your appliance model:
Top basket with side levers
– Pull out the top basket  1 out. 
–To  lower the basket, press in the...

en
12
You can use tablets as well as powder  
or liquid detergents for dishwashers, but 
never use washing up liquid. The dosage  
can be individually adjusted with powder  
or a liquid detergent according 
to the degree of soiling. Tablets contain 
an adequately large amount of active  
ingredients for all cleaning tasks. Modern,  
pow erful detergents predominantly 
use a low-alkaline formulation with  
phosphate and enzymes. Phosphates  
bond the lime in the water. Enzymes break 
down starch and...

en
13
Tip 
If the utensils are only lightly soiled, slightly  
less than the indicated amount 
of detergent is usually adequate.  
Suitable detergents and care products  
can be purchased online via our website 
or via customer service (see back page). 
Combination detergent
Apart from conventional detergents (Solo), 
a number of products are offered with 
additional functions. These products 
contain not only the detergent but also  
rinse-aid and salt replacement substances  
(3in1) and, depending on...

en
14
The max. possible number of programmes is illustrated 
in this overview. 
The corresponding programmes for your appliance can be  found on the fascia.
Programme selection
You can select a suitable programme  
according to the type of utensils and  
degree of soiling.
Information for test institutes
Test institutes can request the conditions  
for running comparison tests by sending  
an e-mail to  
[email protected].  
Quote the appliance number (E­Nr.) 
and the production date (FD)...

en
15
* depending on model 
Additional options can be set with the  
buttons 
P.
Express
 W
ash
/ S
peed
 P
e
rf
ec
t (
Var
io
Speed)Ÿ  Express Wash/ Speed Perfect/
(VarioSpeed) *
This function can reduce the running time  
by approx. 20% to 50% depending on the  
selected rinse programme. To obtain  
optimum cleaning and drying results at a 
reduced running time, water and energy  
consumption are increased.
Ï  Intensive zone *Inte
ns
iv
e
 z
on e
Perfect for a mixed load. You can wash  
very soiled...

en
16
T
im
er
 p
rogramm
in
gTimer programming *
* depending on model 
You can delay the start of the programme  
by 3, 6 or 9 hours. 
–Switch on ON/OF F switch ( .
– Keep pressing the Preselected starting  time button  H until the appropriate 
display 3h, 6h or 9h is lit.
– Press START button  @, timer 
programming is activated.
– To delete the preselected starting time,  keep pressing the Preselected starting  
time button  H until none of the 
displays 3h, 6h or 9h is lit. 
You can change your...

en
17
A regular inspection and maintenance of  
your machine will help to prevent faults. 
This saves time and prevents problems.
Overall condition of the machine
– Check spray arm for grease and 
limescale deposits.
If you find such deposits: 
– Fill detergent dispenser with detergent.  Start the appliance without utensils in  
the programme with the highest rinsing  
temperature.
Clean the appliance with detergents/ 
appliance cleaners which are particularly  
suitable for use with dishwashers. 
–...

en
18
Spray arms
Limescale and contaminants in the rinsing  
water may block nozzles 
and bearings on the spray arms 1: 
and 1B.
– Check outlet nozzles on the spray  arms for blockages.
– Unscrew the upper spray arms  1: (1/
4 revolution).
– Remove the lower spray arm  1B 
upwards.
– Clean spray arms under running water. 
– Re-engage or screw on spray arms. The majority of  faults which could occur in  
daily operation can be rectified by the 
user. This ensures that the appliance is  
quickly available...

en
19
Waste water pump
Large food remnants or foreign objects  
which were not captured by the filters may 
block the waste water pump. The rinsing 
water will then be above the filter.  
In this case: 
– First always disconnect the appliance from the power supply.
– Take out top basket  1 and bottom 
basket  1b.
– Remove the filters  1R.
– Scoop out water, use a sponge if  required.
– Prise out the white pump cover  (as illustrated) using a spoon. Grip the  
cover on the crosspiece and lift  
diagonally...

en
20–Switchon theappli
ance.
– Water is left in the appliance at the end  of the programme. 
– Waste water hose is blocked or kinked.
– Waste water pump blocked,  cover on the waste water pump  
is not locked in position  
(see Waste water pump).
–Fi lters blocked.
– The programme has not yet ended.  Wait until programme  
ends or implement “Reset” 
function.
The “Check water supply” display  h 
flashes rapidly. 
– Water in the safety system.
– Switch off the appliance and pull out the mains plug. 
–...