Siemens Sn 66t052 Operating Instructions

en
11
Pans
Bottom basket 9*
Tip 
Heavily soiled utensils (pans) should  
be placed in the bottom basket. The more 
powerful spray jet provides a better  
dishwashing result. 
Tip 
Other examples, such as the best way  
of loading your dishwasher, can be found 
on our homepage as a free download. The 
corresponding Internet address can  
be found on the back page of these  
instructions for use.
Cutlery basket
You should always place cutlery unsorted  
with the points downwards.   
To prevent injuries,...

en
12
Small accessories holder *Sma
ll a
ccessor
ie
s
 h
o
ld
er
* depending on model 
Light-weight plastic accessories, e.g. cups,  
lids, etc. can be held securely in the small  
accessories holder.
Knife shelf *Kn
ife
 she
lf
* depending on model 
Long knives and other utensils can be  
arranged horizontally.
Ad
ju
s
tin
g
 th
e
 h
e
ig
h
t o
f
 th
e
 b
asketAdjusting the height of the 
basket *
* depending on model 
If required, the height of the upper utensils  
basket  1* can be adjusted to provide...

en
13
Top basket with side levers
– Pull out the top basket 1* out. 
–To  lower the basket, press in the left 
and then the right lever on the outside  
of the basket. In doing so, hold the  
sides of the basket along the upper 
edge to prevent it from suddenly 
dropping.
–To  raise the basket, hold the basket on 
the sides of the upper edge and lift it  
up.
– Before re-inserting the basket again,  ensure that it is at the  same height on 
both sides. Otherwise, the appliance  
door cannot be closed and...

en
14
Adding detergent
– If the detergent dispenser 9: is still 
closed, press the lock  9B to open the 
detergent dispenser. 
Pour detergent into the dry detergent  
dispenser 9: only (insert tablet flat, 
not on its edge). 
Dosage: see manufacturer’s  
instructions on the packaging.  
The graduated detergent  
dispenser 9: helps you add the 
correct amount of powder or liquid  
detergent. 
Usually 20 ml–25 ml are adequate  
for normal soiling. If using tablets, one  
tablet is adequate.
– Close the...

en
15
Notes 
– You will obtain optimum rinsing 
and drying results by using solo  
detergents and applying salt and rinse 
aid separately.
– If programmes are short, tablets  may not have full cleaning effect due to  
different dissolving properties 
and there may even be undissolved 
detergent residue. It is recommended  
to use washing powder for these  
programmes.
– The Intensive programme (on some  models) requires one tab only. When  
using washing powder, you can apply  
some of this cleaning...

en
16
The max. possible number of programmes is illustrated 
in this overview. 
The corresponding programmes for your appliance can be  found on the fascia.
Programme selection
You can select a suitable programme  
according to the type of utensils and  
degree of soiling.
Information for test institutes
Test institutes can request the conditions  
for running comparison tests by sending  
an e-mail to  
[email protected].  
Quote the appliance number (E­Nr.) 
and the production date (FD)...

en
17
* depending on model 
Additional options can be set with the  
buttons 
h.
Express
 W
ash
/ S
peed
 P
e
rf
ec
t (
Var
io
Speed)Ÿ  Express Wash/ Speed Perfect/
(VarioSpeed) *
This function can reduce the running time  
by approx. 20% to 50% depending on the  
selected rinse programme. The change in  
the running time is indicated on the digital 
display 8. To obtain optimum cleaning 
results at a reduced running time, water  
and energy consumption are increased.
Ha
lf lo
ad§  Half load *
If you...

en
18
Programme data
The programme data (consumption  
values) can be found in the summary of 
instructions. They refer to normal 
conditions and the water hardness set  
value •:‹… . Different influencing factors 
such as e.g. water temperature or line  
pressure may result in deviations.
Aqua
 s
ensorAqua sensor *
* depending on model 
The Aqua sensor is an optical measuring  
device (light barrier) which measures the  
turbidity of the rinsing water. 
The Aqua sensor is used according to the...

en
19
Remaining running time display
When the programme is selected, the  
remaining running time of the programme 
is indicated on the digital display 8. 
The running time is determined during the 
programme by the water temperature, the 
number of utensils as well as the degree 
of soiling and may vary (depending on the  
selected programme).
Timer programming
You can delay the start of the programme  
in 1 hour steps up to 24 hours. 
– Open the door. 
–Switch on ON/OF F switch( .
– Press the button `+...

en
20
To change the setting: 
– Press programme button
3.
Each time the button is pressed,  
the set value increases by one level; 
when the value of ˜:‹ƒ  has been 
reached, the display jumps back  
to ˜:‹‹ . 
– Press START button ). 
The set value is saved. 
– Close the door.
Switching off the appliance
Short time after the end of the programme: 
– Open the door. 
– Switch off ON/OFF switch  (.
– Turn off the tap (not applicable if Aqua- Stop fitted).
– Remove the utensils when they have  cooled down....