Siemens Sn 64m080 Operating Instructions

Rinse aiden
11
, Rinse aidRinse aid 
As soon as the rinse-aid refill  
indicator H is lit on the fascia, there 
is still a rinse-aid reserve of 1-2 rinsing  
processes. Refill with rinse aid. 
The rinse aid is required for stain-free  
utensils and clear glasses. Use only  
rinse aid for domestic dishwashers. 
Combined detergents with rinse-aid  
component may be used up to a water 
hardness of 21° dH (37° fH,  
26° Clarke, 3.7 mmol/l) only. If  
the water hardness is over 21° dH, 
rinse aid must be...

enUtensils
12
Switching off rinse aid refill  
indicator 
If the rinse-aid refill indicator 
H is 
impaired (e.g. when using combined  
detergents containing rinse aid  
component), it can be switched off.


Utensilsen
13
Cups and glasses 
Top basket 
12
Pans
Bottom basket  1b
Tip 
Heavily soiled utensils (pans) should  
be placed in the bottom basket. The  
more powerful spray jet provides  
a better dishwashing result. Tip 
Other examples, such as the best way  
of loading your dishwasher, can 
be found on our homepage as a free  
download. The corresponding Internet  
address can be found on the back page  
of these instructions for use.
Cutlery drawer 
Arrange the cutlery in the cutlery drawer  
1*  as...

enUtensils
14
F
old ing
 s p
ik esFolding spikes *
* depending on model 
The spikes can be folded down to  
improve arrangement of pans, bowls  
and glasses. Small accessories holder *
Sm
a ll a c c
es sor
ie s  ho ld er
* depending on model 
Light-weight plastic accessories, e.g.  
cups, lids, etc. can be held securely in  
the small accessories holder. 
Adjusting the height of the  
basket 
The height of the upper utensils basket  
12  can be adjusted in 3 stages to 
create more space either in the...

Detergenten
15
1.
Pull out the top basket  12 out. 
2. To lower  the basket, press in the left 
and then the right lever on the  
outside of the basket. In doing so,  
hold the sides of the basket along  
the upper edge to prevent it from  
suddenly dropping.
3. Toraise  the basket, hold the basket 
on the sides of the upper edge and 
lift it up.
4. Before re-inserting the basket again,  
ensure that it is at the  same height 
on both sides. Otherwise, the 
appliance door cannot be closed  
and the upper...

enDetergent
16
Adding detergent 
1.
If the detergent dispenser  9 is still 
closed, press the lock  9* to open 
the detergent dispenser. 
Pour detergent into the dry detergent  
dispenser 9 only (insert tablet flat, 
not on its edge).  
Dosage: see manufacturer’s  
instructions on the packaging. 
The graduated detergent  
dispenser 9 helps you add the 
correct amount of powder or liquid  
detergent. 
Usually 20 ml–25 ml are adequate  
for normal soiling. If using tablets,  
one tablet is adequate.
2....

Detergenten
17
Notes


enOverview of programmes
18
/ Overview of programmesOverviewofprogrammes
The max. possible number of programmes is illustrated in this overview. 
The corresponding programmes and their arrangement can be found on the 
fascia.   Programme selection 
You can select a suitable programme  
according to the type of utensils and 
degree of soiling.
Type of utensils Type of soiling Programme Possible 
additional  
optionsProgramme sequence
pots and pans,  
non-sensitive  
utensils 
and cutlery very adhesive...

Additional optionsen
19
Information for test institutes 
Test institutes receive the information for  
comparability tests (e.g. according to  
EN60436).  
These are the conditions for conducting  
the tests, however these are not the  
results or consumption values.  
Request by e-mail to:
[email protected] 
The product number (E no.) and the  
production number (FD) are required  
which you can find on the rating plate  
92
 on the appliance door. 
0 Additional optionsAdditional options
*...

enOperating the appliance
20
1 Operating 
the appliance
Operating theappliance
Programme data 
The programme data (consumption  
values) can be found in the summary of  
instructions. They refer to normal  
conditions and the water hardness set  
value  •:‹… . Different influencing factors 
such as e.g. water temperature or line  
pressure may result in deviations.
Aq u
a s ens
orAqua sensor *
* depending on model 
The Aqua sensor is an optical  
measuring device (light barrier) which 
measures the...