Siemens Sn 56t592 Operating Instructions

Water softening system/Special salten
11
Water hardness table 
Using special salt 
Always refill with special salt  
immediately before switching on the  
appliance. This ensures that overrun  
special salt solution is immediately  
washed out and does not corrode the  
rinsing tank. 
1.
Open the screw-type cap of the  
compartment  1b.
2. Fill the tank with water (only required  
when switching on the appliance for  
the first time). 
3. Then add dishwasher salt  (not table 
salt or tablets) . 
The...

enRinse aid
12
, Rinse aidRinse aid 
As soon as the rinse-aid refill  
indicator P is lit on the fascia, there 
is still a rinse-aid reserve of 1-2 rinsing  
processes. Refill with rinse aid. 
The rinse aid is required for stain-free  
utensils and clear glasses. Use only  
rinse aid for domestic dishwashers. 
Combined detergents with rinse-aid  
component may be used up to a water 
hardness of 21° dH (37° fH,  
26° Clarke, 3.7 mmol/l) only. If  
the water hardness is over 21° dH, 
rinse aid must be...

Utensilsen
13
Switching off rinse aid refill  
indicator 
If the rinse-aid refill indicator 
P is 
impaired (e.g. when using combined  
detergents containing rinse aid  
component), it can be switched off.


enUtensils
14
Unloading the dishwasher 
To prevent water from dripping off the  
upper basket onto the utensils in the  
lower basket, it is recommended  
to empty the appliance from the bottom 
up. 
Hot utensils are sensitive to shock!  
Therefore, when the programme ends,  
leave the utensils to cool down in the  
dishwasher until they can be handled. 
Note 
When the programme ends, water  
droplets can still be seen inside  
the appliance. This does not affect  
the drying of the utensils. 
Cups and...

Utensilsen
15
Cutlery drawer 
Arrange the cutlery in the cutlery drawer  
1*
 as illustrated. Separately arranged 
utensils are easier to remove after 
washing. 
The drawer can be taken out. 
Depending on the model, you can fold  
down the side shelves to provide more  
room for taller items of cutlery. The front  
rows of prongs can be folded down  
to provide room for wider handles. 
Fo ld in g spikesFolding spikes *
* depending on model 
The spikes can be folded down to  
improve arrangement of pans,...

enDetergent
16
Adjusting the height of the  
basket 
The height of the upper utensils basket  
12
 can be adjusted in 3 stages to 
create more space either in the upper or  
lower basket. 
Appliance height 81.5 cm 
Appliance height 86.5 cm
1. Pull out the top basket  12 out. 
2. To lower  the basket, press in the left 
and then the right lever on the  
outside of the basket. In doing so,  
hold the sides of the basket along  
the upper edge to prevent it from  
suddenly dropping. 3.
Toraise  the basket,...

Detergenten
17
Adding detergent 
1.
If the detergent dispenser  92 is still 
closed, press the lock  9: to open 
the detergent dispenser. 
Pour detergent into the dry detergent  
dispenser 92 only (insert tablet flat, 
not on its edge).  
Dosage: see manufacturer’s  
instructions on the packaging. 
The graduated detergent  
dispenser 92 helps you add the 
correct amount of powder or liquid  
detergent. 
Usually 20 ml–25 ml are adequate  
for normal soiling. If using tablets,  
one tablet is adequate.
2....

enDetergent
18
Notes


Overview of programmesen
19
/ Overview of programmesOverviewofprogrammes
The max. possible number of programmes is illustrated in this overview. 
The corresponding programmes and their arrangement can be found on the 
fascia.   
Programme selection 
You can select a suitable programme  
according to the type of utensils and 
degree of soiling.
Type of utensils Type of soiling Programme Possible 
additional  
optionsProgramme sequence
pots and pans,  
non-sensitive  
utensils  
and cutlery very adhesive...

enAdditional options
20
Information for test institutes 
Test institutes receive the information for  
comparability tests (e.g. according to  
EN60436).  
These are the conditions for conducting  
the tests, however these are not the  
results or consumption values.  
Request by e-mail to:
[email protected] 
The product number (E no.) and the  
production number (FD) are required  
which you can find on the rating plate  
9B
 on the appliance door. 
0 Additional optionsAdditional options
*...