Siemens Sn 56t591 Instructions For Use

en11
Cutlery
 drawer
Arrange  the cutlery in the cutlery drawer
21 as illustrated. Separately arranged
utensils are easier to remove after washing. The drawer can be taken out.
Small  accessories holder *
* depending  on model
Light-weight plastic accessories, e.g. cups, lids, etc. can be held securely in the small accessories holder .
Adjusting the height of the
basket The  height of the upper utensils basket
can be adjusted in 3 stages to create more space either in the upper or lower basket. Appliance...

en
12
Pull out the top basket 22 .
To  lower  the basket, press in the left
and then the right lever on the outside of the basket. In doing so, hold thesides of the basket along the upper edge to prevent it from suddenly dropping.
To  raise  the basket, hold the basket on
the sides of the upper edge and lift it up.
Before re-inserting the basket again, ensure that it is at the same height on both sides. Otherwise, the appliance door cannot be closed and the upper spray arm will not be connected to...

en13
Adding
 detergent
Pour detergent into the dispenser 30
(insert tablet flat, not on its edge).  Dosage: see manufacturer s
instructions on the packaging.
Close the cover on the detergent dispenser by sliding it up until the lock engages without dif ficulty.
The detergent dispenser opens automatically at the optimum time depending on the programme. The powder or liquid detergentis distributed in the appliance and is dissolved, the tablet falls into the tablet collecting tray where it dissolves in...

en
14 Overview
 of programmes
The  max. possible number of programmes is illustrated in this overview . The corresponding
programmes for your appliance can be found on the fascia.
Programme
T ype of utensils
and soilingProgramme sequencePossible additional options
Auto 65 ±75 Pots, utensils and cutlery Highly soiledIs optimised according to the soiling with the aid of sensors.all
Auto 45 ±65 Utensils and cutlery Normally soiledIs optimised according to the soiling with the aid of sensors.all
Eco 50...

en15
Additional
 options
* depending  on model
Additional options 
9 can be set with the
buttons.
Saving  time (V arioSpeed) *
The  >>Save time

en
16
Remaining
 running time display
When  the programme is selected, the
remaining running time of the programme is indicated on the digital display 
3.
The running time is determined during the programme by the water temperature, thenumber of utensils as well as the degree of soiling and may vary (depending on the selected programme). Display  window
Apart  from information on the programme
sequence, the display window 
12 also
indicates additional information on e.g. glass protection system is...

en17
T
o change the setting,
press programme button C .
Each time the button is pressed, the set value increases by one level; when the value of 
 has been reached, the
display jumps back to 
 (of f).
Press ST ART button 10, the set value
is saved.
Close the door .
Switching  off the appliance
Short  time after the end of the programme:
Open the door .
Switch off ON/OFF switch 1.
Turn of f the tap (not applicable
if  Aqua-Stop fitted).
Remove the utensils when they have cooled down.
Warning
At the end of...

en
18
Interior
 light*
20
The  interior light comes on when the door
is opened irrespective of whether the ON/OFF switch 
1 is switched on or of f.
When the door is closed or ajar , the light
is of f.
Open the door .
Switch on ON/OFF switch 1.
Hold down programme button A and
press ST ART button 
10 until 
is indicated on the digital display .
Release both buttons. The LED for button 
A flashes and
the digital display displays the factory setting 
.
Press programme button A  until
the factory set value...

en19
Filters The filters 
27
 keep large foreign objects
in the rinsing water away from the pump. These foreign objects may occasionally block the filters. The filter system consists of a coarse filter ,
a flat fine filter and a microfilter .
After each washing cycle check the filters for residue.
Unscrew filter cylinder as illustrated and take out filter system.
Remove any residue and clean filters under running water.
Re-install filter system in reverse sequence and ensure that the arrow marks are...

en
20
Waste
 water pump
Large  food remnants in the rinsing water
not retained by the filters may block the waste water pump. The rinsing water is then not pumped out and covers the filter .
In this case:
First disconnect the appliance from the power supply .
Remove the filters 27.
Scoop out water , use a sponge
if required.
Using a spoon, prise of f pump cover
(as illustrated) until it clicks, then grip the cover by the lug and first pull it upwards until it resists and then pull it out forwards.
Check...