Home > Siemens > Dishwasher > Siemens Sn 55m530 Operating Instructions

Siemens Sn 55m530 Operating Instructions

    Download as PDF Print this page Share this page

    Have a look at the manual Siemens Sn 55m530 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 428 Siemens manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Rinse aiden
    11
    Switching off salt refill  
    indicator/water softening 
    system
    Sw
    it
    ch in g of f
     w a
    te r
     so f
    te nin g sy
    st em
    If the salt refill indicator  ` is impaired 
    (e.g. when using combined detergents  
    containing salt component), it can be  
    switched off.
    
    						
    							enUtensils
    12
    3.
    Hold down programme button  # 
    and press START button  P until 
    • :‹ .... is indicated on the digital 
    display.
    4. Release both buttons. 
    The LED for button  # flashes and 
    the digital display  ) displays the 
    factory setting  •:‹… .
    5. Press programme button  # until 
    the factory set value  §:‹†  is 
    indicated on the digital display  ).  
    To change the setting: 
    1. Press programme button 3.
    Each time the button is pressed, the  
    set value increases by one level;  
    when the value of §:‹‡  has been 
    reached, the display jumps back  
    to §:‹‹  (off). 
    2. Press START button P. 
    The set value is saved. 
    Switching off rinse aid refill  
    indicator 
    If the rinse-aid refill indicator  h is 
    impaired (e.g. when using combined  
    detergents containing rinse aid  
    component), it can be switched off.
    
    						
    							Utensilsen
    13
    Loading the dishwasher 
    1.
    Remove large food remnants. It is  
    not necessary to prerinse utensils  
    under running water.
    2. Place the utensils so that 
    – they are secure and cannot tip 
    over.
    – all utensils with their openings  face down.
    – parts with curves or indentations  are at an angle, thereby allowing  
    water to drain.
    – does not obstruct rotation of the  two spray arms  1: and  1B.
    Very small utensils should not be 
    washed in the machine, as they may fall  
    out of the baskets.
    Unloading the dishwasher 
    To prevent water from dripping off the  
    upper basket onto the utensils in the  
    lower basket, it is recommended  
    to empty the appliance from the bottom  
    up. 
    Hot utensils are sensitive to shock!  
    Therefore, when the programme ends,  
    leave the utensils to cool down in the  
    dishwasher until they can be handled. 
    Note 
    When the programme ends, water  
    droplets can still be seen inside  
    the appliance. This does not affect  
    the drying of the utensils. Cups and glasses 
    Top basket 
    1
    Pans
    Bottom basket  1b
    Tip 
    Heavily soiled utensils (pans) should  
    be placed in the bottom basket. The  
    more powerful spray jet provides  
    a better dishwashing result.
           
    						
    							enUtensils
    14
    Cutlery basket 
    You should always place cutlery  
    unsorted with the points downwards.   
    To prevent injuries, place long, pointed  
    implements and knives on the knife  
    shelf.
    Et
    a
    ge reEtagere *
    The etagere and the space underneath  
    can be used for small cups and glasses  
    or for larger items of cutlery, such as  
    wooden spoons or serving cutlery. The  
    etagere can be folded up if not required.  
    * Depending on the model, a 3-fold  
    height adjustment is possible. To do 
    this, first place the etagere vertically  
    and pull up, then place at a slight angle,  
    push down to the required height (1, 2, 
    or 3) and snap into place.
    Fo ld in g spikesFolding spikes *
    * depending on model 
    The spikes can be folded down to  
    improve arrangement of pans, bowls  
    and glasses. 
    Small accessories holder *
    Sm a ll a c c
    es sor
    ie s  ho ld er
    * depending on model 
    Light-weight plastic accessories, e.g.  
    cups, lids, etc. can be held securely in  
    the small accessories holder.
    
    
    
    
    
    
      
    						
    							Utensilsen
    15
    Knife shelf *
    K
    nif e
     s h
    elf
    * depending on model 
    Long knives and other utensils can be  
    arranged horizontally.
    Ad ju st
    in g  th e
     h e
    ig h
    t o f
     t h
    e b ask
    etAdjusting the height of the 
    basket * 
    * depending on model 
    If required, the height of the upper  
    utensils basket  1 can be adjusted to 
    provide more space for tall utensils  
    either in the upper or lower basket. 
    Appliance height 81.5 cm 
    Appliance height 86.5 cm 
    Select one of the two following  
    procedures according to the design of 
    the top basket for your appliance model: Top basket with side levers 
    1.
    Pull out the top basket  1 out. 
    2. To lower  the basket, press in the left 
    and then the right lever on the  
    outside of the basket. In doing so,  
    hold the sides of the basket along 
    the upper edge to prevent it from  
    suddenly dropping.
    3. To raise  the basket, hold the basket 
    on the sides of the upper edge and  
    lift it up.
    4. Before re-inserting the basket again, 
    ensure that it is at the  same height 
    on both sides. Otherwise, the  
    appliance door cannot be closed  
    and the upper spray arm will not be  
    connected to the water circuit. 
    Top basket with upper and  
    lower roller pairs 
    1. Pull out the top basket  1 out. 
    2. Remove the upper basket and re- 
    attach it to the upper (stage 3) or  
    lower (stage 1) rollers.
    Top basket Bottom 
    basket
    Setting 1 max. ø 22 cm 30 cm 
    Setting 2 max. ø 24.5 cm 27.5 cm 
    Setting 3 max. ø 27 cm 25 cm
    Top basket Bottom basket
    Setting 1 max. ø 24 cm 33 cm 
    Setting 2 max. ø 26.5 cm 30.5 cm 
    Setting 3 max. ø 29 cm 28 cm
       
    						
    							enDetergent
    16
    . Detergent
    DetergentYou can use tablets as well as powder  
    or liquid detergents for dishwashers, but  
    never use washing up liquid.  
    The dosage can be individually adjusted  
    with powder or a liquid detergent  
    according to the degree of soiling.  
    Tablets contain an adequately large  
    amount of active ingredients  
    for all cleaning tasks. Modern, powerful  
    detergents predominantly use a low- 
    alkaline formulation with phosphate 
    and enzymes. Phosphates bond  
    the lime in the water. Enzymes break  
    down starch and remove protein. 
    Phosphate-free detergents are less  
    frequent. These have a slightly weaker  
    lime bonding capacity and require 
    a higher dosage. To remove coloured  
    stains (e.g. tea, tomato sauce), oxygen- 
    based bleaching agents are usually  
    used. 
    Note 
    To ensure a good washing result,  
    always follow the instructions  
    on the detergent packaging!
    If you have further questions,  
    we recommend that you contact  
    the detergent manufacturers’ helpline. ãWarning –  Read and observe the 
    safety information and instructions for  
    use on the packaging for cleaning and  
    rinsing agents. Adding detergent 
    1.
    If the detergent dispenser  9 is still 
    closed, press the lock  9* to open 
    the detergent dispenser. 
    Pour detergent into the dry detergent  
    dispenser 9 only (insert tablet flat, 
    not on its edge).  
    Dosage: see manufacturer’s  
    instructions on the packaging. 
    The graduated detergent  
    dispenser 9 helps you add the 
    correct amount of powder or liquid  
    detergent. 
    Usually 20 ml–25 ml are adequate  
    for normal soiling. If using tablets,  
    one tablet is adequate.
    2. Close the cover on the detergent  
    dispenser by sliding it up until the  
    lock engages without difficulty. 
    The detergent dispenser opens  
    automatically at the optimum time  
    depending on the programme.  
    The powder or liquid detergent  
    is distributed in the appliance and is  
    dissolved, the tablet falls into  
    the tablet collecting tray where it  
    dissolves in doses.
    
    
    
     
    						
    							Detergenten
    17
    Tip 
    If the utensils are only lightly soiled,  
    slightly less than the indicated amount  
    of detergent is usually adequate.  
    Suitable detergents and care products  
    can be purchased online  
    via our website or via customer service  
    (see back page).  
    Combination detergent 
    Apart from conventional detergents  
    (Solo), a number of products are offered  
    with additional functions. These  
    products contain not only the detergent  
    but also rinse-aid and salt replacement  
    substances (3in1) and, depending  
    on the combination (4in1, 5in1, etc.),  
    additional components such as glass  
    protection or stainless steel cleaner.  
    Combination detergents function only  
    up to a specific degree of hardness  
    (usually 21°dH). Over this limit salt  
    and rinse-aid must be added.  
    As soon as combined detergents  
    areused, therinse programme 
    is adjusted automatically to ensure  
    the best possible rinsing and drying  
    result. ã
    Warning –  Do not place small parts 
    for washing in the tablet collecting tray  
    12 ; this prevents the tablet from 
    dissolving evenly.
    ã Warning –  If you want to add more 
    utensils after the programme 
    has started, do  not use the tablet 
    collecting tray 12 as a handle 
    for the upper basket. The tablet could 
    already be there and you will touch 
    the partially dissolved tablet. Notes
    
    						
    							enOverview of programmes
    18
    / Overview of programmes
    Ove
    rv iewofpr
    og rammesThe max. possible number of programme s is illustrated in this overview. 
    The corresponding programmes and their arrangement can be found on the 
    fascia.   Programme selection 
    You can select a suitable programme  
    according to the type of utensils and  
    degree of soiling.
    Type of utensils Type of soiling Programme Possible 
    additional  
    optionsProgramme sequence
    pots and pans,  
    non-sensitive  
    utensils  
    and cutlery very adhesive burned- 
    in or dried-on food  
    remnants containing  
    starch or protein ±
     / °
    Intensive 70° all Prerinse 
    Clean 70°
    Intermediate rinse
    Final rinse 65°
    Drying
    Á 
    Auto 45° - 65° all Is optimised according  
    to the soiling with the aid 
    of sensors.
    mixed utensils  
    and cutlerypart dried, common  
    household food  
    remnants Á 
    Auto 45° - 65°
    all Is optimised according  
    to the soiling with the aid  
    of sensors.
    â  / à
    Eco 50° all Prerinse 
    Clean 50°
    Intermediate rinse
    Final rinse 65°
    Drying
    sensitive utensils,  
    cutlery,  
    temperature- 
    sensitive plastic  
    and glasses
    slightly adhesive,  
    fresh food remnants é
     / è
    Gentle 40° IntensivZone 
    Express Wash/  
    Speed Perfect  
    (VarioSpeed) 
    Half load
    Extra drying Prerinse
    Clean 40°
    Intermediate rinse 
    Final rinse 55° 
    Drying
    ñ  / ð
    Quick 45° Extra drying Clean 45°
    Intermediate rinse
    Final rinse 55°
    all types  
    of utensils
    cold rinsing, 
    intermediate cleaning ù
     / ø
    Prerinse none Prerinse
     
    						
    							Additional optionsen
    19
    Information for test institutes 
    Test institutes receive the information for  
    comparability tests (e.g. according to  
    EN60436).  
    These are the conditions for conducting  
    the tests, however these are not the  
    results or consumption values.  
    Request by e-mail to:
    [email protected] 
    The product number (E no.) and the  
    production number (FD) are required  
    which you can find on the rating plate  
    92
     on the appliance door. 
    0 Additional options
    Add
    it
    ional
     o
    ptions* depending on model 
    Additional options can be set with  
    the buttons  H.
    Exp
    re s
    s W as h/ Spe ed Per
    fe c
    t ( V
    ar io S pee
    d)Ÿ  Express Wash/ Speed 
    Perfect/ (VarioSpeed) * 
    This function can reduce the running  
    time by approx. 20% to 50% depending 
    on the selected rinse programme. The  
    change in the running time is indicated  
    on the digital display ). To obtain 
    optimum cleaning results at a reduced  
    running time, water and energy  
    consumption are increased.
    Ha lf
     lo ad§  Half load *
    If you have only a few items to wash  
    (e.g. glasses, cups, plates), you can  
    switch to “half load”. This will save  
    water, energy and time. It is  
    recommended to put a little less  
    detergent in the detergent dispenser  
    than for a full load. ·
     Hygiene *
    Hyg
    ie ne
    The temperature is increased during the  
    cleaning process. This increases the  
    hygiene status. This additional option is  
    ideal for cleaning e.g. chopping boards 
    and baby bottles. 
    Ï  Intensive zone *
    In
    te nsiv
    e z one
    Perfect for a mixed load. You can wash  
    very soiled pots and pans in the lower  
    basket together with normally soiled  
    utensils in the upper basket. The spray  
    pressure in the lower basket is  
    intensified, the rinsing temperature is  
    increased slightly.  
    ¿  Extra drying *
    E
    xt r
    a d r
    yin g
    An increased temperature during the  
    final rinse and an extended drying  
    phase ensure that even plastic parts dry  
    better. There is a slight increase in the  
    energy consumption.
     
    						
    							enOperating the appliance
    20
    1 Operating 
    the appliance
    Ope
    ra ting
     t
    heapplianceProgramme data 
    The programme data (consumption  
    values) can be found in the summary of  
    instructions. They refer to normal  
    conditions and the water hardness set  
    value  •:‹… . Different influencing factors 
    such as e.g. water temperature or line  
    pressure may result in deviations.
    Aq u
    a s ens
    orAqua sensor *
    * depending on model 
    The Aqua sensor is an optical  
    measuring device (light barrier) which  
    measures the turbidity of the rinsing 
    water. 
    The Aqua sensor is used according to  
    the programme. If the Aqua sensor is  
    active, “clean” rinsing water can be  
    transferred to the next rinse bath and 
    water consumption can be reduced by  
    3–6 litres. If the turbidity is greater, the  
    water is drained and is replaced with 
    fresh water. In the automatic  
    programmes the temperature and  
    running time can also be adjusted to the  
    degree of soiling. 
    Switching on the appliance 
    1. Turn on the tap fully.
    2. Switch on ON/OFF switch (. 
    The Eco 50° programme display  
    flashes. This programme remains  
    selected if no other programme  
    button 0 is pressed. The expected 
    programme duration  
    flashes on the digital display ).
    3. Press the START button P. 
    The programme starts running. Note 
    For ecological reasons the Eco 50°  
    programme is preset whenever 
    the appliance starts. This conserves  
    environmental resources and not least  
    saves you money.
    Remaining running time  
    display 
    When the programme is selected, the  
    remaining running time of the  
    programme is indicated on the digital  
    display  ). 
    The running time is determined during 
    the programme by the water  
    temperature, the number of utensils as  
    well as the degree of soiling and may  
    vary (depending on the selected  
    programme).
    Tim er  pro
    gr amm in
    gTimer programming *
    * depending on model 
    You can delay the start of the  
    programme in 1-hour steps up to 
    24 hours. 
    1. Close the door.
    2. Switch on ON/OFF switch  (.
    3. Press button  @ + until the digital 
    display  ) jumps to  œ:‹‚ .  
    4. Press  @ + or – button until the 
    displayed time corresponds with your  
    requirements.
    5. Press START button  P, timer 
    programming is activated.
    6. To delete timer programming, press  
    the  @  + or – button until  ) œ :‹‹  
    is indicated on the digital display.   
    You can change your programme  
    selection at any time until the  
    programme starts.
     
    						
    All Siemens manuals Comments (0)

    Related Manuals for Siemens Sn 55m530 Operating Instructions