Siemens Sf 64m330 Eu Operating Instructions

en11
Top basket with side levers 
– Pull out the top basket 
1 out. 
–To  lower the basket, press in the left 
and then the right  
lever on the outside of the basket. In 
doing so, hold the sides of the basket  
along the upper edge to prevent it from  
suddenly dropping.
–To raise the basket, hold 
the basket on the sides of the upper 
edge and lift it up.
– Before re-inserting the basket again,  ensure that it is at the same 
height on both sides. Otherwise, 
the appliance door cannot be closed 
and...

en 
12
Adding detergent 
– If the detergent dispenser 
9 is still 
closed, press the lock  1b to open 
the detergent dispenser. 
Pour detergent into the dry detergent  
dispenser 9. Dosage: see 
manufacturer’s instructions  
on the packaging.  
The graduated detergent  
dispenser 9 helps you add 
the correct amount of powder or liquid 
detergent. 
Usually 20 ml–25 ml are adequate  
for normal soiling. If using tablets, one 
tablet is adequate.
– Close cover on the detergent  dispenser. To do this, (1)...

en13
The max. possible number of programmes is illustrated 
in this overview. 
The corresponding programmes and their arrangement c an be found on the fascia.
Programme selection 
You can select a suitable programme  
according to the type of utensils and  
degree of soiling. Information for test institutes 
Test institutes can request the conditions  
for running comparison tests by sending  
an e-mail to  
[email protected].  
Quote the appliance number (E
­Nr.) 
and the production date...

en 
14
* depending on model 
Additional options can be set with the  
buttons 
X.
Ÿ  Express Wash/ 
Speed Perfect * 
The >>Express Wash/ Speed Perfect

en15
End of programme 
The programme has ended when  
the programme end display
@ and 
the display of the executed programme  
are lit.  
The end of the programme is also  
indicated by an acoustic signal. This 
function can be changed as follows: 
– Open the door. 
– Hold down programme button 3 
and switch on the main switch (. 
–Rel ease both buttons.
The programme button 3 flashes.
To change the setting:
– Press programme button 3. Each 
time the Programme button 3 
is pressed, the buzzing sound...

en 
16
A regular inspection and maintenance of  
your machine will help to prevent faults. 
This saves time and prevents problems. 
Overall condition of the machine 
– Check spray arm for grease and 
limescale deposits.
If you find such deposits: 
– Fill detergent dispenser with detergent.  Start the appliance without utensils in  
the programme with the highest rinsing  
temperature.
Clean the appliance with detergents/ 
appliance cleaners which are particularly  
suitable for use with dishwashers. 
–...

en17
Spray arms 
Limescale and contaminants in the rinsing  
water may block nozzles  
and bearings on the spray arms 
12 
and 1:.
– Check outlet nozzles on the spray  arms for blockages.
– Unscrew the upper spray arm  12.
– Remove the lower spray arm  1: 
upwards.
– Clean spray arms under running water. 
– Re-engage or screw on spray arms. The majority of  faults which could occur in  
daily operation can be rectified by the  
user. This ensures that the appliance is 
quickly available for use again....

en 
18
Waste water pump 
Large food remnants in the rinsing water  
not retained by the filters may block  
the waste water pump. The rinsing water 
is then not pumped out and covers  
the filter.  
In this case: 
– First disconnect the appliance from 
the power supply.
– Remove the filters  1J.
– Scoop out water, use a sponge if  required.
– Loosen screw on the cover (Torx T 20)  and remove the cover.
– Check inner compartment and remove  any foreign objects.
– Re-insert cover and screw tight. 
–...

en19
... on the appliance 
Lower spray arm rotates sluggishly. 
– Spray arm blocked.
The door is difficult to open. *
– Child-proof lock is activated. The 
deactivation instructions are at the  
back in the envelope. 
* depending on model
Door cannot be closed. 
– D o o r  l o c k  h a s  b e e n  a c t iv a t e d . T o  r e s e t ,  close the door with greater force.
Cover on the detergent dispenser cannot  
be closed. 
– Detergent dispenser overfilled or  mechanism blocked by sticky  
detergent...

en 
20
White stains on the utensils/glasses  
remain milky. 
If phosphate-free detergents are used with  
hard tap water, white deposits may be  
deposited more easily on utensils and 
the container walls.  
– Too little/unsuitable detergent. 
– Too weak programme selected. 
– No/too little rinse aid. 
– No/too little special salt. 
– Water softening system set to the 
wrong value.
– Salt dispenser lock not fastened. 
Contact the detergent manufacturer,  
in particular if:  
– the utensils are very wet...