Siemens Sf 24t860 Operating Instructions

en21
... on the utensils 
Food residue on the utensils. 
– Utensils placed too closely together, 
utensils basket overfilled.
– Too little detergent.
– Rinse programme too weak. 
– Spray arm rotation obstructed. 
– Spray arm nozzles blocked.
–Fi lters blocked.
– Filters incorrectly inserted.
– Waste water pump blocked.
– Top basket on right and left not set to  same height.
Tea or lipstick residue is not completely  
removed. 
– The detergent has an inadequate  bleaching effect.
– Too low rinsing...

en 
22
If the advice given does not resolve your  
problem, please contact your customer 
service. Contact details can be found on  
the back cover of this instruction manual  
or in the enclosed customer service list. 
When calling , please quote the appliance  
number (1) and the production date  
(FD = 2) which can be found on the rating  
plate 
9* on the appliance door.
Rely on the expertise of the  
manufacturer.   Call us to ensure that the 
repair will be carried out  by fully-trained  
service...

en23
– Install built-under or integratable 
appliances only under continuous  
worktops which have been screwed  
to adjacent cupboards to ensure 
stability.
– Do not install the appliance near heat  sources (radiators, heat storage tanks, 
cookers or other appliances which 
generate heat) and do not install under  
ahob.
– After installing the appliance, ensure  that the plug is easily accessible. 
(see Electrical connection)
–Some models:
The plastic housing on the water  
connection contains an...

en 
24
Waste-water connection 
– The required work sequence can be 
found in the installation instructions. If  
required, fit a siphon with an drainage 
connection. 
– Connect the waste-water hose to the  drainage connection of the siphon with 
the enclosed parts. 
Ensure that the drainage hose is not  
kinked, crushed or twisted and that  
there is no cover plate in the drainage  
to prevent the waste water from flowing  
out!
Fresh water connection 
– Connect the fresh-water connection to  the tap...

en25
Transportation 
Empty the dishwasher and secure loose  
parts. 
Drain the appliance according  
to the following steps: 
–Turnonthetap. 
– Close the door. 
– Switch on the main switch 
(. 
– Select programme  +.
The expected programme duration  
is indicated on the numerical display  
8 . Programme sequence starts.
– After approx. 4 minutes  End the programme by simultaneously  
pressing buttons # and 3.
– After approx. 1 minute 
The numerical display indicates ‹.
– Switch off main switch ( and turn...

   

 


 
DownloadedfromDishWasherManualcomManuals    

 
  


  







  



 

 
*9000231454* 9000231454  en
 (9101) 451G