Siemens Se 65m352 Instructions For Use

en11
Pots
 and pans
Lower  basket 
27
Cutlery Cutlery should be placed in the dishwasher always unsorted and with theeating surface pointing downwards. The spray jet is then better able to reach the individual parts. To prevent injuries, place long, pointed
accessories and knives on the étagère (some models) or on the knife shelf (available as an accessory). Folding  spikes *
*  on applicable models
T o improve stacking of pots and pans, the
spikes can be folded down.
Shelf   *
*   not on all models
Lean...

en
12
Adjusting
 the height
of the basket * * some  models
If required, the height of the upper utensils basket can be adjusted to provide more space for tall utensils either in the upper or lower basket.
Appliance height in cm
8186
Max. ø  in cm upper20/25*20/25*
max. ø  in cm lower30/25*34/29*
Select one of the two following procedures according to the design of the top basket for your appliance model: 
Top  basket with upper and
lower roller pairs
Pull  out the top basket.
Remove the top basket and...

en13
Detergent
Y ou can use commercially available liquid
or powder proprietary detergents for dishwashers or T ABS (do not use
handwash!). If phosphate-free detergents are used with hard tap water , white deposits may be
deposited more easily on utensils and the container walls. This can be remedied by adding more detergent. See detergent packaging to determine whether a detergent is suitable for silver parts. If you have any other questions, we recommend that you contact the helplinesof the detergent...

en
14 auto
 3in1
The  use of so-called combined detergent
products may make the use of rinse aid and/or salt unnecessary .
There are currently several types ofcombined detergent products available.
2in1:  They contain detergent and rinse
aid  or salt function.
3in1:  They contain detergent, rinse aid
and  salt function.
4in1 : They contain a detergent,
rinse-aid, salt function  and an additional
glass protection component.
In addition, other combined products with a comparable ef fect are offered...

en15
Switching
 the salt refill
indicator / water softening system off and on
Hold  down the programme button B
and switch on the main switch 
1,
then release the buttons. The illuminated button 
B  and the
factory-set value 
 on the digital
display flash. T o change the setting: press the
programme button 
B  .
Each time the button is pressed, the set value increases by one; when the value
 is reached, the display jumps back
to 
 (the salt refill indicator / water
softening system has been switched...

en
16 Overview
 of programmes
The max. possible number of programmes is illustrated in this overview . 
The corresponding programmes for your appliance can be found on the fascia.
Cof fee, cake, milk,
sausage, cold drinks, salads
Soups, souf
flés,
potatoes, pastries, rice, eggs,fried food Delicate
T
ype of Dishes
e.g. porcelain, pans, 
cutlery,glasses, etc.
T ype of food
remnants e.g. Programme- sequence
Dry
Clean 55 
Clean
40 
PrerinseClean
55 
Clean
45 
Soups,
potatoes, pastries,
rice, eggs, fried...

en17
Washing
 dishes
 Reduce costs!
If only a small number of dishes have been loaded into the dishwasher , selecting
a programme that operates at the next lowest temperature will usually suf fice.
Programme  data
The  programme specifications can be
found in the summary of instructions.Programme specifications refer to normal conditions. Greater deviations may occur due to:
dif ferent amounts of dishes
temperature of mains water supply
pressure of mains water supply
ambient temperature
fluctuations in...

en
18
Time
 delay *
*  on  applicable models
Y ou can delay the start of the programme
in 1-hour steps up to 19 hours.
Switch on the appliance.
Press the timer programming button
3 until the digital display 9 jumps
to 
.
Keep pressing the timer programming button until the required time is displayed.
T o delete the timer programming,
keep pressing the button until 
is displayed. Y ou can change your programme
selection at any time until the programme starts.
End  of programme
The  end of the programme is...

en19
Intensive
 drying
In  the final rinse the appliance operates
at a higher temperature and therefore an improved drying result is obtained.(Caution if utensils are fragile!)
Hold down programme button A  and
press main switch until 
1 the digital
display illuminates.
Release both buttons.
The LED for button 
A  flashes and
the digital display 
9 displays the factory
setting 
 (of f) or  (on).
To change the setting, press
programme button 
A .
Switch of f the main switch 1. Additional
 functions
*  on...

en
20 Maintenance
 and care
A  regular inspection and maintenance of
your machine will help to prevent faults. This saves time and prevents problems. Overall  condition of the
machine
Check  washing chamber for grease
and limescale deposits.
If you find such deposits:
Fill the detergent dispenser with detergent, start the appliance withoututensils in the programme which has the highest wash temperature.
Clean the appliance with detergents/ appliance cleaners which are particularly suitable for use with...