Home > Siemens > Dishwasher > Siemens Se 56t591 Eu Instructions For Use

Siemens Se 56t591 Eu Instructions For Use

    Download as PDF Print this page Share this page

    Have a look at the manual Siemens Se 56t591 Eu Instructions For Use online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 428 Siemens manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							en11
    Arranging
     crockery,
    glasses, etc. in the dishwasher
    Loading  the dishwasher
    Scrape off any large amounts of
    left-over food. It is not necessary to rinse the dishes under running water .
    Place objects in the dishwasher in such a way that
     items such as cups, glasses, pots/pans, etc. are stood upside down,
     curved items, or those with recesses, should be at a slant so that water can run of f,
     they are stacked securely andcannot tip over ,
     they do not prevent the spray arms from rotating while washing takes place.
    V ery small items should not be washed in
    the dishwasher as they could easily fall outof the baskets. Removing  the dishes
    To  prevent water dripping from the top
    basket onto the dishes in the lower basket, we recommend that you empty the lower basket first and then the top basket. Cups
     and glasses
    Upper  basket 
    20
    * not  included with all models
    Pots  and pans
    Lower  basket 
    27
       
    						
    							en
    12
    Cutlery Cutlery should be placed in the dishwasher always unsorted and with the eating surface pointing downwards. The spray jet is then better able to reach theindividual parts. T
    o prevent injuries, place long, pointed
    accessories and knives on the étagère (some models) or on the knife shelf (available as an accessory). Folding  spikes *
    *  on applicable models
    T o improve stacking of pots and pans, the
    spikes can be folded down.
    Shelf   *
    *   not on all models
    Lean tall glasses and those with long stems against the shelf – not against other items to be washed.
    Long items, serving cutlery , salad servers
    or knives should be placed on the shelf so that they do not obstruct the rotation of the spray arms. The shelf can be folded back when not required for use. Small
     accessories holder*
    *  some models
    Light-weight plastic accessories, e.g. cups, lids, etc. can be held securely in the small 
    accessories holder.
    Adjusting  position of basket *
    *  not on all models
    86cm
    81cmØ max. 30/*25cm
    Ø max. 20/*25cm
    Ø max. 34/*29cm
    Ø max. 20/*25cm
    If required, the height of the top basket can be adjusted in order to create more space for large utensils either in the top or bottom basket. Select one of the two following procedures according to the design of the top basketfor your appliance model:
       
    						
    							en13
    Top
     basket with upper
    and lower roller pairs
    Pull  out the top basket.
    Remove the top basket and re-attach it to the upper or lower rollers.
    Top  basket with side levers
    (Rackmatic)
    Pull  out the top basket.
    To lower the basket, press in
    succession the two levers on the left and right sides of the basket. Always take hold of the side of the basket on the upper edge, otherwise the basket will not drop smoothly (and may damage the utensils).
    T o raise the basket, take hold of the
    basket on the upper edge and pull upwards.
    Before you re-insert the basket, ensure that it is at the same height on bothsides. Otherwise, the appliance door cannot be closed and the upper spray arm will not connect to the water circuit.
       
    						
    							en
    14
    Baking
     sheet spray head *
    *  some models
    Y ou can clean large baking sheets or
    grilles with the baking sheet spray head. T o do this, remove the top basket and
    insert the spray head as illustrated in the diagram.
    T o ensure that the spray jet can reach all
    parts, arrange the baking sheets as illustrated (max. 4 baking sheets and 2 grilles).
    Note
    Never operate the dishwasher without the top basket or baking sheet spray head! Detergents
    Information  about detergents
    You  can use any brand of liquid or powder
    detergent, as well as tablets, that have been specifically designed for use in domestic dishwashers. (Do not use normal washing-up liquid!) Nowadays there are three types of dishwasher detergent available:1.  those containing phosphates and      chlorine, 2.  those containing phosphates but no      chlorine, 3.  those containing neither phosphates     nor chlorine. When a phosphate-free detergent is used in conjunction with hard water , there is a
    greater possibility that white marks will be left behind on crockery and glasses, etc. These can be avoided by pouring an increased amount of detergent into the 
    dispenser. Chlorine-free detergents have a reduced bleaching ef fect. This can mean that tea
    stains are not completely removed or plastic items become discoloured. This can be resolved by:
    selecting a higher temperature programme, or
      increasing the amount of detergent, or
     using a detergent that contains chlorine.
    Check the label on the detergentpackaging to determine whether a particular product is suitable for use with silverware. If you have any further questions, we recommend that you contact the customer advice departments of the various detergent manufacturers.
       
    						
    							en15
    Detergent
     compartment with
    measuring marks The  side of the detergent compartment is
    marked with lines to help you determine how much powder to add. The capacity of the detergent container is15 ml up to the bottom line and 25 ml up to the middle line. When the compartment is full it contains 40 ml.
    If the detergent dispenser 30  is still
    closed, press the lock 
    28  to open the
    detergent dispenser .
    Adding  detergent
    Fill the dispenser 30  with detergent.
    Please observe the manufacturer ’s
    instructions printed on the detergent packaging when determining the correct dosage.
    Important
    Due to the dif ferent solvency properties of
    the detergent tablets supplied by various manufacturers, the cleaning ef ficiency of
    the detergent may not be fully utilised by short programmes. It is recommended to use washing powder for these programmes.
    When you select the Auto 65 -75 
    programme, tip an extra 10–15 ml ofdetergent onto the inside surface of the 
    door.
     Reduce costs!
    If your dishes are only moderately dirty ,
    you may be able to use less detergent than recommended.
    Close the lid on the detergent compartment. Press down the lid (1) until it clicksshut (2).
    If you are using detergent in tablet form, read the manufacturer ’s
    recommendations on the packaging inorder to  determine where the tablets should be placed inside the dishwasher (e.g. in cutlery basket, detergent compartment, etc.). Make sure that the lid on the detergent compartment is closed, even if you are using tablets.
        
    						
    							en
    16 auto
     3in1
    The  use of so-called combined detergent
    products may make the use of rinse aid and/or salt unnecessary .
    There are currently several types ofcombined detergent products available.
    2in1:  They contain detergent and rinse
    aid  or salt function.
    3in1:  They contain detergent, rinse aid
    and  salt function.
    4in1 : They contain a detergent,
    rinse-aid, salt function  and an additional
    glass protection component.
    In addition, other combined products with a comparable ef fect are offered according
    to the manufacturer .
    >>>  Always check the type of detergent
    or combined product which you are using!
    Always follow the operating instructionsor the information on the packaging.
    The rinse programme is automaticallyadjusted in order to obtain the best possible rinsing and drying result. Observe the following important information if using combined cleaning products:
    Regeneration salt is not required up to a water hardness of 21  dH (37  fH,
    26  Clarke, 3.7 mmol/l) only . No other
    settings on the appliance are required.
    Salt is still required if the water hardness is  above 21 dH (37  fH,
    26 Clarke, 3.7 mmol/l). Fill the salt
    dispenser with salt 
    24 and select
    setting 6 on the water softening system.
    If in doubt, please contact the detergent manufacturer , especially if:
    the utensils are very wet at the end ofthe programme.
    limescale forms.
    Note
    Optimum rinsing and drying results can be obtained by using standard detergents in conjunction with separate application ofsalt and rinse aid. Observance of the operating instructions or information on the packaging of the combined detergents determines their 
    effectiveness.
    Note
    Even if the rinse aid and/or salt refill indicator is lit, the rinse programme runscorrectly when 3in1 products are used. If the rinse aid refill indicator 
    6 or salt
    refill 
    5 indicator is defective and you
    would like to switch it of f, proceed as
    follows: Switching  the rinse aid refill
    indicator off and on 
    You  can switch the rinse aid refill indicator
    6 on or of f. This function can be
    changed as follows.
    Hold down the programme button 3
    and press the main switch 1 until the
    digital display lights up, then release the buttons.
    9 is indicated on the digital display
     (rinse aid refill indicator on).
    By pressing the programme button
    3, you can switch of f  or switch
    on 
     the rinse aid indicator .
    Switch off the main switch 1;
    the setting is saved.
        
    						
    							en17
    Switching
     the salt refill
    indicator / water softening system off and on
    Hold  down the programme button B
    and switch on the main switch 
    1,
    then release the buttons. The illuminated button 
    B  and the
    factory-set value 
     on the digital
    display flash. T o change the setting: press the
    programme button 
    B  .
    Each time the button is pressed, the set value increases by one; when the value
     is reached, the display jumps back
    to 
     (the salt refill indicator / water
    softening system has been switched 
    off).
    Switch of f the main switch 1.
    The set value is stored within the
    device.
    Approx. 4 litres of water are required to regenerate the water softening system.As a result, the water consumption per
    rinse cycle increases by 0 to maximum 4 litres depending on the water hardness
    setting.
    Note
    If you use the detergent and rinse aid separately or switch from combined detergents to standard cleaning products, ensure that the rinse aid refill indicator has been switched on and the water softening system has been set to the correct waterhardness.
        
    						
    							en
    18 Overview
     of programmes
    The max. possible number of programmes is illustrated in this overview . The corresponding
    programmes for your appliance can be found on the fascia.
    Rinse if the utensils
    have been
    left several
    days prior to washing in the
    dishwasher.
    Coffee,
    cake, milk, sausage,
    cold drinks, salads
    Soups, souf
    flés,
    potatoes, pastries, rice, eggs, fried food Delicate
    T
    ype of dishes
    e.g. porcelain pans, 
    cutlery,glasses,
    etc. T ype of food
    remnants e.g. Programme- sequence
    The programme sequence is optimised and adjusted
    according to the degree of soiling on the utensils.
    Dry Dry
    Clean
    65 
    Interme-
    diate rinse Clean
    50 
    PrerinseClean
    55 
    Interme-
    diate rinse Clean
    45 
    Prerinse
    Coffee,
    cake, milk, sausage,
    cold drinks, salads
    Soups,
    potatoes, pastries,
    rice, eggs, fried food
    Non-
    sensitive Mixed
    Wash programme V
    ery little
    Little
    Large
    High Normal
    Lightly Adhesive
    Amount of foodremnants State of food remnantAuto
    65 –75 Auto
    55 –65 Auto
    35 –45  Eco
    50  Quick
    45  Prerinse
    Low
    Normal
    Mixed
           
    						
    							en19
    Washing
     dishes
     Reduce costs!
    If only a small number of dishes have been loaded into the dishwasher , selecting
    a programme that operates at the next lowest temperature will usually suf fice.
    Programme  data
    The  programme specifications can be
    found in the summary of instructions.Programme specifications refer to normal conditions. Greater deviations may occur due to:
    dif ferent amounts of dishes
    temperature of mains water supply
    pressure of mains water supply
    ambient temperature
    fluctuations in mains voltage
    machine-related factors (e.g. temperature, water volume, ...).
    Energy and water consumption is reducedby up to 1/4 when dishes are washed in the upper basket only .
    W ater consumption values are based on a
    water hardness setting of 4. Aqua  sensor *
    *  on applicable models
    The Aqua sensor is an optical measuring device which measures the turbidity of the rinsing water . A light barrier can detect
    dissolved food remnants in the water , e.g.
    egg, fat and oats. The Aqua sensor is used according to the programme. When the Aqua sensor is active, ”clean” rinsing water may be transferred into the next rinsing bath and/or the temperature adjusted. If theturbidity is greater , the water is drained
    and is replaced with fresh water . In this
    way the water consumption is reduced by approx. 4 litres for utensils which are ”less” 
    dirty. Switching
     the dishwasher ON
    Turn on the tap.
    Set main switch 1 to ON.
    Indicators light up according to the last programme that was selected. This same programme will run again if no other programme button 
    7 is
    pressed
    The numerical display 9 shows the
    expected duration of the programme.
    Close door .
    The programme starts automatically .
    Optical  indicator during
    operation * *  With some models
    During the rinse programme a light point appears on the floor below the device’ s
    door . Only open the dishwasher door
    when the light point has disappeared. In the case of built-in dishwashers with flush front the light point will not be visible. Remaining  running time display
    When  the appliance has started, the
    expected programme running time is displayed. The programmed running time is af fected by the water temperature, the
    number of dishes, as well as the degree of soiling. If these conditions are changed, the running time (depending on the selected programme) can vary greatly .
    As the ef fect is not detected until a
    programme is running, the time maybe longer or shorter than expected.
      
    						
    							en
    20
    Time
     delay *
    *  on  applicable models
    Y ou can delay the start of the programme
    in 1-hour steps up to 19 hours.
    Switch on the appliance.
    Press the timer programming button
    3 until the digital display 9 jumps
    to 
    .
    Keep pressing the timer programming button until the required time is displayed.
    T o delete the timer programming,
    keep pressing the button until 
    is displayed. Y ou can change your programme
    selection at any time until the programme starts.
    End  of programme
    The  end of the programme is indicated by
    a buzzer . This function can be changed as
    follows:–
    Hold down Function button C
    pressed and switch on main switch
    1, then let the buttons go.
    Function Button 
    C  flashes, and the
    digital display indicates the value 
    which was set at the factory (semi-loud). T o change the setting: 
    Press Function button 
    C .
    Each depression of the button increases the set value by one, when
     is reached, the display
    jumps back to 
     (of f).
    Switch of f the main switch 1. 
    The set value is stored in the appliance. Switching
     the dishwasher OFF
    Several  minutes after the programme has
    ended:
    Open the door when the programme has ended.
    Set main switch 1 to OFF .
    Turn the water tap of f.
    (Does not apply when Aqua-Stop unit has been fitted)
    Remove dishes, etc. when they have cooled down.
    Interrupting  the programme
    Open the door . Caution! There is a risk
    of water squirting out from inside the appliance. Do not open the door fully until the spray arm has stoppedrotating.
    Set main switch 1 to OFF .
    Indicator lights extinguish. The programme is retained in the dish- washer memory .
    If the hot water was switched ON or the appliance has already heated up and then the appliance door opened, leave the door ajar for several minutes and then close. Otherwise, the appliance door may fly open due to expansion.
    In order to continue with the stored programme, set the main switch to ON again and close the door .
    Cancel  programme (Reset)
    Only when the master switch is ON.
    Press the 
    A  and C buttons
    simultaneously , and hold them pressed
    for approx. 3 seconds. The numerical display shows 
    .
    Close the door .
    The programme continues for approx.  1 min.
    When it has ended, set the main switch
    1 to OFF.
    T o restart the dishwasher , set main switch
    1 to ON again and select desired
    programme.
           
    						
    All Siemens manuals Comments (0)

    Related Manuals for Siemens Se 56t591 Eu Instructions For Use