Home > Siemens > Dishwasher > Siemens Se 20t090 Instructions For Use

Siemens Se 20t090 Instructions For Use

Here you can view all the pages of manual Siemens Se 20t090 Instructions For Use. The Siemens manuals for Dishwasher are available online for free. You can easily download all the documents as PDF.

Page 1



    
      
	
 
    

Page 2


				            

Page 3

enIndex
Safety instructions 4 
.  . . . . . . . . . . . . 
Getting to know your appliance 6 
. . 
Before using your appliance for the first time 7 
. . . . . . . . . . . . . . . . . . 
Setting up the water softener 8 
. . . . 
Filling in the salt 9 
. . . . . . . . . . . . . . . 
Filling with rinse aid 10 
. . . . . . . . . . . . 
Utensils 1 1 
. . . . . . . . . . . . . . . . . . . . . . 
Detergents 14 
. . . . . . . . . . . . . . . . . . . 
auto 3in1 16 
. . . . . . . . . . . . . . . . . . . . ....

Page 4

en
4 Safety
 instructions
Delivery
Immediately  check the packaging and
dishwasher for any damage which may have been caused in transit. Do not usea damaged appliance, but consult your 
supplier.
Please dispose of packaging material 
properly.
Installation
Install and connect the appliance according to the installation and assembly instructions.
The dishwasher must NOT be connected to the power supply duringinstallation.
Ensure that the protective conductor system of the domestic electricity supply has...

Page 5

en5
Open the door carefully when the programme is still running. Thereis a risk of hot water spraying out of the appliance.
To prevent injuries, e.g. caused
by stumbling, open the dishwasher only briefly in order to load and unload the dishwasher .
Read and observe the safety nformation and instructions for use onthe packaging for cleaning and rinsing agents.
Children  in the household
If fitted, use the childproof lock. An
exact description can be found in the back of the envelope.
Do not allow children...

Page 6

en
6 Getting
 to know your
appliance
Diagrams  of the control panel and the
interior of the appliance can be found in the envelope at the front.
Individual positions are referred to in
the text. Control  panel
1
  Main  switch
2
Button M/OK: Select options, store (changed) value
3 Buttons – and +: Select programmes and settings
4
 Start Button: Start programme
5
This display gives optical character information on the programmes, options, and settings to be selectedas well as on the available actions.
6...

Page 7

en7
Before
 using your appliance for the first time
Before  you can use your appliance for the first time, you must select the language. When
the appliance has been switched on, the following display is output:
DE  EN FR NL IT EL
 M
OK Start– +< >
The
 language abbreviation “DE” for
“Deutsch” (German) is flashing. If you want to select a dif ferent language,
press – or + 
3  repeatedly until the
abbreviation of your desired language flashes.
Confirm the language selection by pressing M/OK 
2 .
All...

Page 8

en
8 Setting
 up the water
softener
In  order to provide satisfactory rinsing
results, the dishwasher requires soft water ,
i.e., containing little or no lime, otherwise water stains will be left behind on the dishes and interior containers.If the tap water exceeds a certain level of hardness, it must be softened, i.e., decalcified, so that it can be used in the 
dishwasher. This is achieved by adding a special salt to the water softener inside the 
dishwasher. The water softener , that is the required...

Page 9

en9
Filling
 in the salt
If  the hardness of your mains water
corresponds to the device’ s index value
 (see chapter “Setting up the softening
system”), you do not need to fill in the salt because the operation will not use anysalt. If the set values 
 to  are
displayed, salt must be added. During the rinse cycle the salt is being washed automatically from the salt compartment into the softening system where it will dissolve the lime. The lime-containing solution drains from the dishwasher . Afterwards...

Page 10

en
10 Filling
 with rinse aid
Rinse  aid is used in washing mode to
ensure that glasses are sparkling and utensils are stain-free. When the appliance is switched on,  low
rinse aid  level is indicated by ”Refill rinse
aid”. Y ou can add rinse aid either when the
appliance door is completely open or – for a more comfortable posture – when the door is half open.
Open the rinse aid dispenser 31  by
pressing the button on the dispenser cover and open the cover . When the
door is half open, also pull out the...
Start reading Siemens Se 20t090 Instructions For Use

Related Manuals for Siemens Se 20t090 Instructions For Use

All Siemens manuals