Siemens Fi 24dp00 Operating Instructions

11
Temperature unit 
The temperature can be displayed in  
degrees Fahrenheit (
°F) or degrees 
Celsius ( °C).
 Press setup button  .
The first menu (temperature unit) 
is displayed.  Press the  + or  – setting button in 
order to switch between degrees  
Fahrenheit ( °F) and degrees Celsius 
( ° C).
 Press the setup button  , 
in order to store the settings. 
The set temperature is displayed  
again in the fascia.
Language setting 
When the appliance is operated,  
all messages are displayed in fascia...

12
Sabbatical mode 
Sabbatical mode settings: 
– the “Super freeze” function is ended (if activated);
– the accoustic signal is switched off  when the button is actuated  
(if activated);
– The interior illumination is switched  off;
– the background illumination of the  fascia is switched off.
To switch the sabbatical mode on:  Press and hold down the “super”  
freezing button  .
 Press Holiday button  .
 Keep the “super” freezing button  
 held down for 3 seconds 
longer.
 The symbol   flashes on 
the...

13
Maximum freezing  
capacity 
In order to retain the vitamins, nutritional  
value, appearance and flavour food 
should be frozen as quickly as possible.  
Do not exceed the max. freezing  
capacity. Freeze the food as quickly 
as possible. 
Information about the max. freezing  
capacity within 24 hours can be found 
on the rating plate. 
The maximum freezing capacity is  
reached in the upper area of the freezer  
space.
Ice maker 
The ice maker makes ice cubes. 
The ice maker starts to make ice cubes...

14
Dispensing water 
Place a suitable receptacle under  
the discharge opening. 
 Press the request water button.
Dispensing ends, when the button 
is released. 
Tip: 
The water from the water dispenser is  
cooled to a palatable temperature. If you  
would like the water colder, place ice  
cubes in the glass before dispensing the 
water.
Dispensing ice  Caution!
 
  
  
 
  Place a suitable receptacle under  
the discharge opening. 
 Press the request ice cubes button.
Dispensing ends, when the button...

15

Lift the front ice cube container and  
pull it out. 
Caution! 
A full ice cube container is heavy!
 Pull out the container, empty and 
clean with lukewarm water.
 Thoroughly rub the container and 
endless screw transportation 
mechanism (Agitation function)  
dry so that new ice cubes cannot  
freeze to them.
 Push the ice cube container all the 
way back onto the supports until it 
locks into position.
 If the container cannot be pushed 
all the way back, twist the screw 
conveyor in the...

16
Cleaning the  
appliance Press the on/off button    
and switch the appliance off! 
Pull out the mains plug or switch off  
the fuse.
 Clean the appliance with lukewarm  
water and a little washing-up liquid. 
Water used for cleaning must not  
drip onto the fascia or light. 
 Clean the door seal with water only  
and then dry thoroughly.
 Remove dirt on the ventilation 
and air release openings using 
a vacuum cleaner.
 Clean the surface of the appliance 
using a damp cloth. 
Afterwards, rub dry....

17
Appliance self-test 
Before you call customer service,  
conduct a self-test on the appliance. Switch off the appliance and wait  
5 minutes. 
Keep the door closed during this  
time.
 Switching on the appliance. 
 At the same time, press the setup  
button    and the alarm 
button  for 5 seconds.
The self-test programme starts. 
Various messages appear in the facia  
one after the other. 
If an error is established during the  
appliance self-test, the 
 
symbol appears in the fascia and an 
error...

18Specification and performance data sheet  
for freezer water filter cartridge
Technical details Through flow speed  (maximum) 0.78 GPM (2.9 l/min) 
Nominal useful duration (maximal) 750 gallons (2838 l) 
Maximum operating temperature 100 ºF (38 ºC)
Minimum pressure 35 psi (241 kPa) 
Minimum operating temperature 33 ºF (1 ºC) 
Maximum operating pressure 120 psi (827 kPa)
General conditions of use 
Read this technical performance data sheet through and make a comparison between the  
capability of this...

19
Eliminating minor faults yourself 
Before you call customer service: Please check whether you can eliminate the fault yourself based on the following information. 
Customer service will charge you for advice  — even if the appliance is still under guarantee! 
Appliance 
Ice maker/Ice and water dispenser Fault Possible cause: Remedial action 
Appliance has  
no refrigerating  
capacity. Interior  
light does not  
function.  
The display does  
not illuminate.
The refrigerating  
unit is switching on...

20The ice maker does  
not make enough  
ice or the ice is  
deformed.
The appliance or ice maker has only just been  
switched on.
Approx. 24 hours is needed until ice production starts.
A lot of ice has been taken. Approx. 24 hours is needed until the ice cube  container is filled again.
Low water pressure. The water pressure must be between 1.72 bar  and 8.25 bar so that the appliance works  
properly.
The water filter is bunged up or used. Change the water filter.
The ice maker does  
not make any...