Siemens Ci 30rp00 Operating Instructions

en
11
Setup mode
Individual adjustments
There are menus for adapting the 
appliance to the individual user require-
ments. These adaptions are carried out 
in the setup mode.
To activate the setup mode:
Press setup button .
The first menu (temperature unit) is 
displayed in the fascia.To switch to the next menu:
Press the selection button 
 or . 
The next menu is displayed and its 
current setting (mostly
  or ).
To make a selection within the setting 
options of a menu:
Press the setting button + or...

en
12
Temperature unit
The temperature can be displayed in 
degrees Fahrenheit (
°F) or degrees 
Celsius (
°C).
Press setup button .
The first menu (temperature unit) is 
displayed.
Press the + or – setting button in 
order to switch between degrees 
Fahrenheit (
°F) and degrees Celsius 
(
°C).
Press the setup button  , in 
order to store the settings. The set 
temperature is displayed again in 
the fascia.
Language setting
When the appliance is operated, all 
messages are displayed in fascia in...

en
13 To switch the sabbatical mode on:
Press and hold down the “super” 
cooling button
 .
Press Holiday button .
Keep the “super” cooling button 
  held down for 3 seconds 
longer.
The symbol   flashes on 
the display panel.
The background illumination in the 
fascia is switched off. 
 is 
displayed in the fascia.
The sabbatical mode is switched 
on.
To switch the sabbatical mode off:
Press Holiday button . 
The previous settings and 
temperature values are once again 
activated.
Preserving food...

en
14
Switching off and 
disconnecting the 
appliance
Switching off the 
appliance
Press the on/off button  .
Disconnecting the 
appliance
If the appliance is not used for 
a prolonged period:
Take all food out of the appliance.
Pull out the mains plug or switch off 
the fuse.
Clean the appliance interior (see 
“Cleaning the appliance”, page 14).
To prevent odours, leave the doors 
open.
Cleaning the 
appliance
Press the on/off button   and 
switch the appliance off! 
Pull out the mains plug or switch...

en
15
Appliance self-test
Before you call customer service, 
conduct a self-test on the appliance.
Switch off the appliance and wait 
5 minutes. 
Keep the door closed during this 
time.
Switching on the appliance.
 
At the same time, press the setup 
button
  and the alarm 
button  for 5 seconds.
The self-test programme starts. 
Various messages appear in the facia 
one after the other.If an error is established during the 
appliance self-test, the
 
symbol appears in the fascia and an 
error message...

en
16
Change the light 
bulbs

Warning
Pull out the mains plug or switch off the 
fuse. Risk of electric shock!

Caution
Do not touch the halogen bulb with your 
fingers. Always use a soft cloth when 
inserting a halogen bulb.
Upper halogen lamp
Halogen lamp type:
12 V/20 W/bulbholder G4
Free the cover and remove.
Remove the defective halogen 
bulb.
Insert the new halogen bulb. 
Always use a soft cloth when 
inserting a halogen bulb.
Replace the cover and press it until 
it engages.
Side halogen lamps...

en
17
Cleaning the chiller 
section drawer filter
Clean the filter on the chiller section 
drawer as follows:
Remove the chiller section drawer.
Press the filter-holder front down-
wards (1) with both hands.
Only open the filter-holder for 
cleaning!
Remove the filter-cover (2).
Clean the filter with clear water and 
leave it to dry. Re-insert the filter.
Replace the filter cover (3).
Press on the filter cover until it 
engages.
Replace the chiller section drawer.
Exchange the odour 
filter
Spare filters...

=
 

=
 

9000 265 242
en (8705) Siemens Elektrogeräte GmbH
Carl-Wery-Straße 34
81739 München
www.siemens-hausgeraete.de Subject to alterations.