Sharper Image Ec Pj10 Projector User Manual

SI Products Service Center
1.888.856.67818:30a.m. – 7:00p.m. (EST) M – F
Mail To: SI ProductsConsumer RelationsService Center Dept. 1683000 Pontiac TrailCommerce Township, MI 48390
e-mail:[email protected]
©2009 THE SHARPER IMAGE and its affiliated companies, all rights reserved. THE SHARPER IMAGE is a registered trademark of THE SHARPER IMAGE and its affiliated companies. 
EC-PJ10
ONE YEAR LIMITED WARRANTYSI PRODUCTS sells its products with the intent that they are free of defects in manufacture...

Instruction Manual and 
Warranty InformationEC-PJ10
Portable 
Media Projector 

2
Super-size your fun.
Thank you for purchasing The Sharper Image® Portable Media Projector. 
This product, along with the entire The Sharper Image collection, connec\
ts 
innovation with cutting-edge design to provide you with years of dependa\
bility 
and enjoyment. For those who want to pump up there TV and movie watching\
 
or video game playing, the portable media projector, from The Sharper Image, 
delivers a large, sharp image that will surely increase your viewing ple\
asure.
IMPORTANT...

3
WARNING - To reduce the risk of burns, fire, electric shock 
or injury to persons:
• An appliance should never be left unattended when plugged in. 
Unplug from outlet
  when not in use and before putting on or taking off parts or 
attachments.
• Close supervision is necessary when this appliance is used by, 
on or near children, invalids or disabled persons.
• Use this appliance only for its intended use as described in this 
manual. Do not use attachments not recommended 
  by The Sharper Image;...

4
EC-PJ10_Buttons.ai   7/6/09   11:04:42 PM
EC-PJ10_Jacks.ai   7/7/09   2:04:08 PM
EC-PJ10_Media Projector.ai   7/6/09   11:28:50 PM
Projector side view
Input jacks
Control panel 

5
Media Projector - Operation Instructions
1) Set up and Installation 
Carefully remove the projector from the box. Make sure you have removed \
all the 
parts in the package. Be sure to read the instruction manual thoroughly \
before 
getting started with the projector set-up.
 • Position the projector on a flat surface up to 6ft. (72”) from the surface on
    which you want to project.
 • The projector can be projected onto a screen, a light-colored wall or ceiling
    using the provided stand.
 • Plug...

6
3) Maintenance
 • To clean the lens, first blow away dust particles with clean and dry air to avoid 
    scratching the lens surface.
 • Do not use any type of fluid or cleaner on the lens surface as they might 
    damage the lens coating.
 • To replace the light bulb, follow all the steps completely below:
      – Turn off the projector, DO NOT unplug, and allow it to cool for 
        30 minutes; red light will be blinking and fan will be running during th\
is
       time as it runs at an extremely...

7
Note:  This equipment has been tested and found to comply with the limits for a 
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are de-
signed to provide reasonable protection against harmful interference in a residential 
installation. This equipment generates uses and can radiate radio frequency energy 
and, if not installed and used in accordance with the instructions, may cause 
harmful interference to radio communications. However, there is no guarantee that...