Sharp Xv Z20000 Projector User Manual

-30
Resize Mode
This function allows you to modify or customize the 
resize mode to enhance the input image.
Press RESIZE on the projector or 
RESIZE on the remote control.
Note
•The RESIZE function that can be selected 
varies depending on the input signal
  (resolution and vertical frequency).
• To return to the standard image, press 
RETURN while “RESIZE” is displayed.
Selecting the Screen Size
RESIZE
RETURN RETURN button
RESIZE button
An image compressed from a 16:9 aspect ratio to a 4:3 aspect ratio...

-31
Basic Operation
About Copyrights
• When using the RESIZE function to select an image size with a different aspect ratio to a TV program or video 
image, the image will look different from its original appearance. Keep this in mind while choosing an image 
size.
• The use of the RESIZE, Subtitle, or Overscan function to compress or stretch the image for commercial 
purposes/public displays in a café, hotel, etc. may be an infringement of copyright protected by law for 
copyright holders. Please use...

-32
Menu Bar Items
The following shows the items that can be set in the projector.
The selectable items vary depending on the selected input, input signals, or adjustment 
values. Items that cannot be selected will be grayed out.
Standard
Natural
Dynamic
Movie1
Movie2
Custom
Standard
Natural
Dynamic
Movie1
Movie2
Memory
+30–30
+30–30
+30–30
+90–90
+90–90
10500 5500
Main menu Sub menu
Contrast
Picture Mode
Bright
Color
Tint
Sharp
Reset CLR Temp
BrilliantColorTM
IRIS
Lamp Setting Gamma Position Picture...

-33
Useful Feature
*1: The “Fine Sync” menu is not available for S-VIDEO or VIDEO Input.
*2: Can be set for HDMI Input.
*3: Can be set for DVI Input.
Main menu Sub menu+150–150
+150–150
+60–60
+60–60
Fine Sync
Clock
Phase
H-Pos
V-Pos
Reset
Special Modes
Signal Info
Auto SyncOff
Normal
High Speed
*1
Resolution
Hor Freq
Vert Freq Page 41
Signal Type
Auto
RGB
Component
Color Space
Main menu Sub menuOptions
Lamp Timer(Life)
LED 
OSD Display 
Background
Economy Mode
RS-232C Port [ON/OFF]
 Auto Power Off...

-34
Using the Menu Screen
Menu Selections (Adjust-
ments)
• This operation can also be performed by using 
the buttons on the projector.
  (Example: Adjusting “Bright”)
1 Press MENU.
• The “Picture” menu screen for the se-
lected input mode is displayed.
2  Press   or   to select the menu 
screen to adjust on the menu 
bar.
Note
• The “Fine Sync” menu is not available 
for selecting S-VIDEO or VIDEO.
Example:  “Picture” menu screen when 
COMPONENT is selected for 
input mode
MENU ENTER
RETURN RETURN...

-35
Useful Feature
3  Press   or   to select the item 
you want to adjust.
(Example: Selecting “Bright”)
To adjust the projected 
image while viewing it
 Press ENTER.
• The selected adjustment item (e.g. 
“Bright”) will be displayed at the bottom 
of the screen.
• When   or   is pressed, the next 
item will be displayed. (e.g. “Bright” is 
replaced with “Color” by pressing  .)
Note
• Press
 RETURN to return to the 
previous screen.
4  Press   or   to adjust the item 
selected.
• The adjustment is...

-36
Picture Adjustment (“Picture” Menu)
Menu operation ⇒ Page 34
Selectable
itemsDescriptionThe main default settings of each item when selecting Picture Mode
CLR Temp BrilliantColor™ IRIS Lamp Setting
Standard For standard image 7500 Off High Brightness Bright
Natural A balanced color image is obtained. 7500 Off High Brightness Bright
Dynamic A vivid image is obtained.  7500 On High Brightness Bright
Movie1For viewing images with the brightness 
slightly toned down in a darkened 
room6500 Off Medium...

-37
Useful Feature
This function allows you to select the desired gamma 
position.
See page 40 for details.
Note
• Gamma can be adjusted in greater detail with 
“Gamma” on the menu screen.
This function controls the quantity of the projected light 
and the contrast of the image.
Note
• You can also use  IRIS on the remote control 
to change the Iris. (See page 29.)
Note
• When “Lamp Setting” is set to “Eco+Quiet”, the 
power consumption will decrease and the lamp 
life will extend. (Projection brightness...

-38
BrilliantColorTM uses Texas Instruments’ BrilliantColorTM
technology. The image becomes brighter while the color 
reproduction is kept at a high level.
For selecting the progressive display of a video signal.
Note
• When using progressive inputs, “Progressive’’ 
cannot be selected.
This function provides high-quality playback of 
images originally projected at 24 fps, such as movies 
on DVDs.
Note
• When using progressive inputs, “Film Mode” 
cannot be selected.
Menu operation ⇒ Page 34
Selectable...

-39
Useful Feature
This function uses edge enhancement to give the 
impression of added depth to images.
This function automatically adjusts the image contrast 
to suit the scene.
This function allows you to reset all adjustment items to 
the default setting.
Selectable items Description
Off The Unveil Control function is not 
activated.
Level 1
Sets the Unveil Control level for viewing 
an image with the impression of added 
depth. Level 2
Level 3
Selectable items Description
No Does not do resetting....