Sharp Xv Z17000 Projector User Manual

Useful Features
-39
If there is data for the stored corrected 
color, the C.M.S. color adjustment screen 
is displayed. (Go to step 3.)
  
C.M.S.1
Select Color
Hue
Saturation
Va l u e
Effect
C.M.S.1 On
Reset
Return
SEL./ADJ.
RETURNENTER
END0000
2  Use the picker and select the color 
of the projected image to correct. 
The picker can be operated by ad-
justment buttons (P/R/O/Q) on the 
remote control.
By enlarging the projected image using  
or 
 MAGNIFY, more fi ne adjustment can 
be performed.
Picker...

-40
8 Adjusting the Bright Boost
Bright Boost uses Texas Instruments’ Bright Boost 
technology. The image becomes brighter while the color 
reproduction is kept at a high level.
Selectable items Description
On
The Bright Boost function is activated.
OffThe Bright Boost function is not activated.
9 Selecting the Film Mode
This function provides high-quality playback of 
images originally projected at 24 fps, such as movies 
on DVDs.
Selectable items Description
Auto Films are detected automatically.
Off...

Useful Features
-41
Computer Image Adjustment (“SIG-ADJ” Menu)
Menu operation ⇒ Page 35
The illustration shown here is for explanation and may 
be different from the actual on-screen display.
Picture
Clock
Phase
H-Pos
V-Pos
      Reset
Resolution
Auto Sync On
Auto
Auto
0 IRE 
Auto Signal Type
Signal Info : 1080P
H : XX.X  kHz/  V : XX.X  Hz Video System
Video Setup
Dynamic Range
SEL./ADJ.
RETURNENTER
END SIG-ADJSCR-ADJ
PRJ-ADJ
00
00
*1
*2
*1  If the input mode is S-VIDEO or VIDEO input, the display...

-42
5 Setting the Video System
The video input system mode is factory preset to “Auto”; 
however, a clear picture from the connected audio-visual 
equipment may not be received, depending on the video 
signal difference. In that case, switch the video signal.
Selectable items
Auto
PA L
SECAM
*NTSC4.43
NTSC3.58
PAL-M
PAL-N
PAL-60
*  When reproducing NTSC signals in PAL video equip-
ment.
Note
• The video signal can only be set in VIDEO or 
S-VIDEO mode.
• When “Video System” is set to “Auto”, you 
may not...

Useful Features
-43
Adjusting the Projected Image (“SCR-ADJ” Menu)
Menu operation ⇒ Page 35
The illustration shown here is for explanation and may 
be different from the actual on-screen display.
Picture
Resize Normal
On
On
Standard
Logo
Upper Left
Front
English Keystone H-Image Shift
V-Image Shift
Overscan
Auto V-Keystone
Keystone Mode
H-Keystone
V-Keystone
Sphere
Rotation
OSD Display
OSD Brightness
Background
Menu Position
PRJ Mode
Language
SEL./ADJ.
RETURNENTER
END SIG-ADJSCR-ADJ
PRJ-ADJ
00
0
0
0
0
1...

-44
Adjusting the Projected Image (“SCR-ADJ” Menu) (Continued)
4 Auto V-Keystone Correction
Select “Auto V-Keystone” in the “SCR-ADJ” menu and 
press ENTER. Vertical keystone correction is performed 
automatically.
Note
• Pressing ENTER when the on-screen display 
of the Auto V-Keystone “On” appears changes 
the setting of the Auto V-Keystone to “Off”.
• The Keystone Correction can be adjusted up 
to an angle of approximately ±12 degrees with 
“Auto V-Keystone”. 
• For details of Keystone mode, see page...

Useful Features
-45
Menu operation ⇒ Page 35
 Rotation
This function can rotate the image at an arbitrary 
angle.
O buttonRotates the image 
counterclockwise.
Q button
Rotate the image clockwise.
Rotation Correction
6 Setting On-screen Display
Selectable items Description
On All on-screen displays are displayed.
Off INPUT/FREEZE/AUTO SYNC/RESIZE/
PICTURE MODE/ECO+QUIET/
MAGNIFY/3D ON/OFF (3D/2D mode 
change) message are not displayed.
7 Setting the Brightness of the 
Menu Screen
Sets the brightness of...

-46
Adjusting the Projector Function (“PRJ-ADJ” Menu)
3 Setting One Touch Play, System 
Standby and Input Name
When a Sharp product equipped with Consumer Elec-
tronics Control (HDMI CEC) is connected to the projector 
with an HDMI cable, you can use the linked function with 
HDMI CEC (“One Touch Play” and “System Standby”).
Note
The CEC function may not work with some CEC 
devices. (When the projector is connected to a non-
Sharp product, the CEC function may not work.)
 Setting the One-Touch Playback...

Useful Features
-47
5 Selecting the Transmission 
Speed (RS-232C)
6 Fan Mode Setting
 Setting the Input Terminal Names (Input 
Name)
Set the name of the input terminal (up to 14 alphanu-
merical characters).
1 Press P/R to select “Input Name” 
and then press ENTER.
Picture
Input name
H D M I 1HDMI1
Reset
ReturnSIG-ADJSCR-ADJ
PRJ-ADJ
\ or | button
Selects a character column.
▼ or 、 button
Selects a character.
ENTER buttonSets the input terminal name.
2 Press P/R to select “Return” and 
then press ENTER...

-48
Enjoying 3D Image Viewing
You can use special 3D Glasses to watch 
3D-supported images on this projector.
  You can enjoy 3D images by viewing the video images 
through the 3D Glasses supplied with the projector or 
through optional 3D glasses sold separately.
  To produce 3D images, liquid crystal shutters in the 
3D Glasses alternately open and close imperceptibly 
fast to exactly match alternating left and right video 
images displayed by the projector.
  Not all consumers can experience and...