Sharp Xr 50s Projector User Manual

37
Useful        
Features
“Projector adjustment (PRJ-ADJ1/2)” menu
Main menu Sub menuPRJ-ADJ1
Page 49
Speaker [On/Off]
System Lock
[Enable/Disable]
Keylock [On/Off]  Auto Restart [On/Off]Page 49
Auto Power Off [On/Off]
Page 49
Page 49
Page 50
Page 51
Fan ModePage 50Normal
High
RS-232C
Page 499600bps
38400bps
115200bps
Auto Sync [On/Off]
Page 49
Main menu
Sub menu
Page 51
Page 52
Page 52
Page 52
Page 52
Page 51
PRJ-ADJ2
FUNCTION Button
Input Search 
Audio Mute
Image Shift
Signal Info
STANDBY Mode
Quick...

38
Adjustment buttons 
(P /R /O /Q )
ENTER button
RETURN button
Press  RETURN  to return 
to the previous screen 
when the menu is 
displayed.

MENU button
Adjustment buttons (
P/R /O /Q )
MENU button
ENTER button
Menu Selections (Quick Start Menu)
This operation can also be performed by using the buttons on the projector.

1 Press  MENU.The “Quick Start Menu” screen for the 
selected Input mode is displayed.
2 Press  P or R to select the 
desired item, then press ENTER .
3 Press P/R /O /Q to adjust the...

39
Useful        
Features
Quick Start Menu
The following items can be confi  gured on the Quick Start Menu.
Selectable items Description
Input Search Start Automatically searches for and switches to the appropriate Input mode.
Pressing an operation button during input searching cancels the search.
Resolution Manually change the resolution.
Use this function when the image and screen size do not match with the 
resolution selected automatically. (See page  44
.)
R

esize Changes the Resize mode.
Use this...

40
4 Press P or R and select “Bright” 
to adjust.
The selected item is highlighted.
To adjust the projected 
image while watching it
Press  ENTER .The selected item (e.g. “Bright”) is 
displayed by itself at the bottom of the 
screen.
When pressing  P or R, the following item 
(“Red” after “Bright”) will be displayed.
Press  ENTER  again to return to the 
previous screen.

Note
5 Press 
O or Q to adjust the item 
selected.
The adjustment is stored.
6 Press  MENU.The menu screen will disappear.





4
0...

41
Useful        
Features
Picture Adjustment (“Picture” Menu)
Menu operation n Page 39
Q PA
G E1 Q PAG E 2
Picture Mode
Contrast 0
0
0
0
BrightColorTint0
Sharp
Standard
SEL./ADJ. ENTER END 0
0
Red
Blue
Picture
SIG SCR PRJ1 PRJ21
2Picture Mode
CLR Temp
BrilliantColor
TM
C.M.S. Setting
C.M.S. Standard
SEL./ADJ. ENTER END
Film Mode
Eco+Quiet
0
1
On
Auto
Off
DNR
Level 2
Reset
765 4
23
Picture SIG SCR PRJ1 PRJ2
1 Selecting the Picture Mode
Selectable 
items Description The default settings of each item when...

42
Picture Adjustment (“Picture” Menu) 
(Continued)
Menu operation n Page 39
2 Adjusting the Image
Adjustment 
items O button
Q button
Contrast For less  contrast.For more 
contrast.
Bright For less 
brightness.For more 
brightness.
Color*
1For less color 
intensity. For more color 
intensity.
Tint*
1 For making skin 
tones purplish. For making skin 
tones greenish.
Sharp*
1For less 
sharpness. For more 
sharpness.
Red*
2For weaker red. For stronger  red.
Blue*
2For weaker 
blue. For stronger 
blue....

43
Useful        
Features
5  Selecting the Film Mode
This function provides high-quality playback 
of images originally projected at 24 fps, such 
as movies on DVDs.
Selectable 
items Description
Auto Films are detected automatically.
Off Films are not detected.
This function is available for the following 
signals.
With COMPUTER/COMPONENT input:
- 480 I
- 576 I
- 1035I (XR-55X only)
- 1080 I (XR-55X only)
With S-VIDEO or VIDEO input:
- All signals

Note
6
 Reducing Image Noise (DNR)
Video digital noise...

44
Signal Adjustment (“SIG-ADJ” Menu)
Menu operation n Page 39
0
0
0
0Phase
ClockH-Pos
V-Pos
Reset
Auto 1024 x 768
0 IRE
Resolution
Signal Type
Video Setup Auto
Video System
Signal Info : 1024 x 768
H 48.3 kHz /  V   60.0    Hz
SEL./ADJ. ENTEREND
Pict.
SIG-ADJ SCR PRJ1 PRJ2
1
3
4
5
6 2
1 Adjusting the Computer Image
If the optimum image cannot be obtained with 
Auto Sync adjustment, use the SIG-ADJ function.
Selectable 
items Description
Clock Adjusts vertical noise.
Phase Adjusts horizontal noise...

45
Useful        
Features
4  Setting the Video System
The video input system mode is factory preset 
to “Auto”; however, a clear picture from the 
connected audio-visual equipment may not be 
received, depending on the Video signal 
difference.
In that case, switch the Video signal.
Selectable items
Auto
PA L
SECAM
*NTSC4.43
NTSC3.58
PA L- M
PA L- N
PA L - 6 0
*  When reproducing NTSC signals in PAL  video equipment.
The Video signal can only be set in S-VIDEO 
or VIDEO mode.
When “Video System” is set...

46
Adjusting the Projected Image (“SCR-ADJ” Menu)
Menu operation n Page 39
SEL./ADJ.ENTEREND
Resize
Image Shift
0
0
Keystone
OSD Display
Closed Caption Overscan
Background
Setup Guide
PRJ Mode On
Front
Wall Color
Language Off
English On
Off
Logo On Normal
Pict.
PRJ1 PRJ2
SIG
SCR-ADJ
98
0
56
4 3
21
7
1  Setting the Resize Mode
Use this function to stretch the image 
vertically or horizontally or when the edges of 
the image cannot be seen.
 For details of the Resize mode, see pages 
30 
and  31.
Y
ou can...