Sharp Xgmb67xl Manual

							37
Useful
Features
The following shows the items that can be set in the projector.
Menu Items
“Screen adjustment (SCR-ADJ)” menu
INPUT 1 (Component)/INPUT 2
(Component)/INPUT 3/INPUT 4 INPUT 1 (RGB)/INPUT2 (RGB)
“Picture” menu
PictureSCR PRJ Net.
Picture Mode
Contrast 0
0
0
0
K 7500
BrightRedBlue
1CLR TempBright Boost
Lamp SettingStandard
Bright
Reset
SEL./ADJ. ENTER END
Help
Picture Mode
Contrast 0
0
0
0
K 7500
BrightColorTint0 Sharp
1CLR TempBright Boost
Progressive 3D ProgressiveStandard
Reset
SEL./ADJ. ENTER END
PictureSCR PRJ Net.
Help
Lamp Setting Bright
Resize
Image Shift 0
0
KeystoneAuto Keystone
OSD Display
Background
Setup Guide
PRJ Mode
LanguageFront
English On Logo
On
Off Normal
SEL./ADJ. ENTER END Pict.SCR - ADJPRJ Net. Help
Main menu Sub menuPicture
Page 42
+30 -30Contrast
+30 -30
+30 -30
+30 -30
+30 -30+30 -30+30 -30
Tint Color
Sharp Bright
Red
Blue
*2*3 *2
*2 *1
*1
Progressive
Lamp Setting*2
Reset5500K
6500K
7500K
8500K
9300K
10500K
2D Progressive
3D Progressive
Film Mode
Bright
Eco + Quiet CLR Temp
Bright Boost [0/1/2]
Page 42
Page 43
Page 43
Page 43
Page 43
Page 43
Standard
Presentation
Movie
Game
sRGB*1 Picture Mode
Main menu Sub menuSCR - ADJ
Page 44
Language Image Shift Resize
Page 44
Page 44
Page 44
Page 44
Page 45
Page 45
Page 45
Page 45
Page 45
Keystone
Auto Keystone [On/Off]
OSD Display [On/Off]
Background
Setup Guide [On/Off]
PRJ ModeNormal
Border
Stretch
Logo
Blue
None
Front
Ceiling + Front
Rear
Ceiling + Rear
English
Deutsch
Español
Nederlands
Français
Italiano
Svenska
Português +127 -127
+96 -96
*1 Items when inputting RGB signal through INPUT 1 or
INPUT 2.
*
2 Items when inputting component signal through INPUT 1 or
INPUT 2, or when selecting INPUT 3 or INPUT 4.
*
3 “Tone” will appear on the menu screen only when PAL or
SECAM signals are input (including when forcibly changed
to those input signals). There is basically no need to adjust
“Tone”, but you can adjust the picture tone with this
adjustment when inputting PAL or SECAM signals. • You can adjust the menu items with icons (
, ,
and ) using the respective buttons on the re-
mote control.
XG-MB67XL_EN_CD_i06.9.11, 6:49 AM 37 
						

							38
“Projector adjustment (PRJ-ADJ)” menu
Pict.
Auto SearchSCRPRJ - ADJNet.
Auto Sync
Auto Power Off
System Sound
System Lock
h On On
On
On
SEL./ADJ. ENTER END0 Lamp Timer(Life) 100%Help
Speaker On
RS-232C 9600 bpsFan Mode NormalDisable
Main menu Sub menuPRJ - ADJPage 46Auto Search [On/Off]
Auto Sync [On/Off]
Auto Power Off [On/Off]
System Sound [On/Off]
Speaker [On/Off]
System Lock
Lamp Timer(Life)Page 46
Page 46
Page 46
Page 46
Page 46
Page 47
Page 47
Old Code
New Code
Reconfirm Fan ModePage 47Normal
High RS-232CPage 479600 bps
115200 bps
Menu Items (Continued)
“Network” menu
Pict.
PasswordSCR PRJNetwork
DHCP Client
SEL./ADJ. ENTER ENDProjector MAC Address
XG-MB67X-L 08:00:1F:B1:B7:74Help
Disable
On
TCP/IPMain menu Sub menuNetworkPage 49Password [Enable/Disable]
DHCP Client
 [On/Off]
TCP/IP
MAC Address
ProjectorPage 49
Page 50
Page 50
Page 50
Page 50
XG-MB67XL_EN_CD_i06.9.11, 6:49 AM 38 
						

							39
Useful
Features
Pict.
There is no picture or audioSCR Net.PRJHelp
Vertical stripes or flickering image appear
Data image is not centered
Color is faded or poor
Picture is dark
The image is distorted
Reset all adjustments to default settings
SEL. ENTER END
“Help” menuThe items you can set with the “Help”
menu
“Help” menu n Page 51• Vertical stripes or flickering image appear
Auto Sync
Adjust vertical noise
Adjust horizontal noise
• Data image is not centered
Auto Sync
H-Pos
V-Pos
• Color is faded or poor
INPUT 1 or INPUT 2
Signal type: Auto/RGB/Component
INPUT 3 or INPUT 4
Video System:Auto/PAL/SECAM/
NTSC3.58/NTSC4.43/PAL-
M/PAL-N/PAL-60
* The selectable items vary depending on the in-
put signal and the selected input mode.
XG-MB67XL_EN_CD_i06.9.11, 6:49 AM 39 
						

							40
Using the Menu Screen
Menu Selections (Adjustments)
Example: Adjusting “Bright”.• This operation can also be performed by using the buttons on the projector.
Press BMENU.• The “Picture” menu screen for the se-
lected input mode is displayed.
Adjustment buttons
(P/R/O/Q)
Example: “Picture” screen menu for INPUT 1
(RGB) mode
Press Q or O and select “Picture”
to adjust.
1
2
ENTER button
RETURN button
Menu item
Picture Mode
Contrast 0
0
0
0
K 7500
BrightRedBlue
1CLR TempBright Boost
Lamp SettingStandard
Bright
Reset
SEL./ADJ. ENTER END
PictureSCR PRJ Net.
Help
MENU/HELP
button Adjustment buttons (P/R/O/Q)
MENU/HELP button ENTER button
• Press lRETURN to
return to the previous
screen when the menu
is displayed.
XG-MB67XL_EN_CD_i06.9.11, 6:49 AM 40 
						

							41
Useful
Features
Press P or R and select “Bright”
to adjust.
• The selected item is highlighted.
• Press hENTER again to return to the
previous screen.
Press O or Q to adjust the item
selected.
• The adjustment is stored.
Press BMENU/HELP.• The menu screen will disappear.
3
4
5
0 Bright
Picture
SEL./ADJ. Rtn. Menu END
Picture Mode
Contrast 0
15
0
0
K 7500
BrightRedBlue
1CLR TempBright Boost
Lamp SettingStandard
Bright
Reset
SEL./ADJ. Single ADJ END
PictureSCR PRJ Net.
Help
Note
Picture Mode
Contrast 0
0
0
0
K 7500
BrightRedBlueCLR TempBright Boost
Lamp SettingStandard
Bright
Reset
SEL./ADJ. Single ADJ END
Resize
Image Shift 0
0
KeystoneAuto KeystoneOff Normal
1
PictureSCR PRJ Net.
Help
Pict.SCR - ADJPRJ Net. Help
Items to be adjusted
• Menu buttons do not function while the projector is operating the “Auto Sync”, “Break Time”,
“FREEZE”, or “AV MUTE” functions.
Note
To adjust the projected
image while watching it
Press hENTER.• The selected item (e.g. “Bright”) is dis-
played by itself at the bottom of the
screen.
• When pressing P or R, the following item
(“Red” after “Bright”) will be displayed.The item displayed by itself
XG-MB67XL_EN_CD_i06.9.11, 6:49 AM 41 
						

							42
Picture Adjustment (“Picture” menu)
Selectable
items
Standard
Presentation
Movie
Game
*sRGB
QExample: “Picture” screen menu for
INPUT 1 (RGB) modeQExample: “Picture” screen menu for
INPUT 3 mode
Picture Mode
Contrast 0
0
0
0
K 7500
BrightRedBlue
1CLR TempBright Boost
Lamp SettingStandard
Bright
Reset
SEL./ADJ. ENTER END
PictureSCR PRJ Net.
Help
Description
For standard image
Brightens portions of image for
more enhanced presentations.
Gives natural tint to the
projected image.
Gives sharpness to the
projected image.
For high fidelity reproduction of
images from a computer.
Picture Mode
Contrast 0
0
0
0
K 7500
BrightColorTint0 Sharp
1CLR TempBright Boost
Progressive 3D ProgressiveStandard
Reset
SEL./ADJ. ENTER END
PictureSCR PRJ Net.
Help
Lamp Setting Bright
Menu operation n Page 40
• You can also press G PICTURE MODE on the remote control to select the picture mode. (See
page 36.)
• *sRGB is an international standard of color reproduction regulated by the IEC (International
Electrotechnical Commission). As the fixed color area has been decided by the IEC, the images are
displayed in a natural tint based on an original image, when “sRGB” is selected.
For additional information about the sRGB function, visit “http://www.srgb.com/”.
You cannot set the items, “Red”, “Blue”, “CLR Temp”, “Bright Boost”, when “sRGB” is selected.
Note
1  1 1  1 
1 Selecting the Picture Mode
• When “sRGB” is selected, the projected image may become dark, but this does not indicate a
malfunction.
Info
• “sRGB” is displayed only when RGB signal is input.
• You can set or adjust each item in the “Picture” menu to your preference. Any changes you make are
retained in memory.
CLR Temp
7500K
7500K
6500K
7500K
–Lamp Setting
Bright
Bright
Eco + Quiet
Bright
Bright
The default settings of each item when selecting Picture Mode
Bright Boost
1
2
0
2
–
XG-MB67XL_EN_CD_j06.9.11, 6:49 AM 42 
						

							43
Useful
Features
4 44 4
4 Progressive
• In NTSC or PAL60Hz, even if the 3D Progres-
sive mode has been set, the three-two pull
down enhancement will be enabled automati-
cally when the film source has been entered.
• When the image is blurred or noisy, switch to
the optimal mode.
• When using progressive inputs, inputs are di-
rectly displayed so that 2D Progressive, 3D
Progressive and Film Mode cannot be se-
lected.
* The film source is a digital video recording with the
original encoded as is at 24 frames/second. The
projector can convert this film source to progres-
sive video at 60 frames/second with NTSC and
PAL60Hz or at 50 frames/second with PAL50Hz
and SECAM to play back a high-definition image. Selectable
items
2D
Progressive
3D
Progressive
Film ModeDescription
Useful to display fast-moving images
such as sports.
Useful to display relatively slow-
moving images such as drama and
documentary more clearly.
Reproduces the image of film source*
clearly. Displays the optimized image of
film transformed with three-two pull down
(NTSC and PAL60Hz) or two-two pull
down (PAL50Hz and SECAM) enhance-
ment to progressive mode images.
Note
5 55 5
5 Lamp Setting
Select-
able
items
Eco +
Quiet
BrightBright-
ness
Approx.
80%
100%Power
consumption
(When using
AC 100V)
280W
350WLamp Life
Approx.
3,000
hours
Approx.
2,000
hoursFa n
sound
Low
Normal
• When “Lamp Setting” is set to “Eco+Quiet”,
the power consumption will decrease and the
lamp life will extend. (Projection brightness
decreases approximately 20%.)
Note
2 22 2
2 Adjusting the Image
*1 Not adjustable/selectable when selecting
“sRGB”.
*2 Not displayed in the RGB input mode.
*3 “Tone” will appear on the menu screen only when
PAL or SECAM signals are input (including when
forcibly changed to those input signals). There is
basically no need to adjust “Tone”, but you can
adjust the picture tone with this adjustment when
inputting PAL or SECAM signals .
Q button
For more
contrast.
For more
brightness.
For stronger red.
For stronger
blue.
For more color
intensity.
For making skin
tones greenish.
For more
sharpness.
For more
vividness. Adjustment
Items
Contrast
Bright
Red*
1
Blue*1
Color*2
Tint*2 *3
Sharp*2
Bright Boost*1
O button
For less
contrast.
For less
brightness.
For weaker red.
For weaker
blue.
For less color
intensity.
For making skin
tones purplish.
For less
sharpness.
For high fidelity
color reproduc-
tion.
Note
• “Bright Boost” and “CLR Temp” cannot be set
when “sRGB” is selected.
• To reset all adjustment items, select “Reset”
and press hENTER.
3 33 3
3Adjusting the Color
Temperature
• Values on “CLR Temp” are only for general
standard purposes.
Note
Selectable
items
5500K
6500K
7500K
8500K
9300K
10500KDescription
For lower color temperature for
warmer, reddish incandescent-like
images.
For higher color temperature for
cooler, bluish, fluorescent-like images.
Menu operation n Page 40
P
R
XG-MB67XL_EN_CD_j06.9.11, 6:50 AM 43 
						

							44
Adjusting the Projected Image
(“SCR - ADJ” menu)
Pict.
Resize
Image Shift 0
0SCR - ADJPRJ Net.
KeystoneAuto Keystone
OSD Display
Background
Setup Guide
PRJ Mode
LanguageFront
English On Logo
On
Off Normal
SEL./ADJ. ENTER ENDHelp
87654
3
21
1 11 1
1 Setting the Resize Mode
• For details of the Resize mode, see pages 34
and 35.
• You can also press HRESIZE on the remote
control to set the resize mode. (See page 34.)
Note
2 22 2
2Adjusting the Image
Position
You can move the projected image vertically.
Q button
• You cannot set this item when “Resize” is set
to “Normal”.
Note
O buttonMenu operation n Page 40
3 33 3
3 Keystone Correction
When the image is projected either from the top
or from the bottom towards the screen at an
angle, the image becomes distorted
trapezoidally. The function for correcting trap-
ezoidal distortion is called Keystone Correction.
For Manual Keystone Correction
Set “Auto Keystone” on the “SCR - ADJ”
menu to “Off”, select “Keystone”, and
then adjust with the slide bar.
For Auto Keystone Correction
Set “Auto Keystone” on the “SCR - ADJ”
menu to “On”.
O button Q button
Manual Correction
• The Keystone Correction can be adjusted up
to an angle of approximately ±13 degrees
(when “Resize” is set to “Normal”).
Note
See page 33 for details of Keystone Correction.
XG-MB67XL_EN_CD_j06.9.11, 6:50 AM 44 
						

							45
Useful
Features
The projector can switch the on-screen display
language among 11 languages.
Selectable items
Front
Ceiling + Front
Rear
Ceiling + RearDescription
Normal image (Projected from
the front of the screen)
Inverted image (Projected
from the front of the screen
with an inverted projector)
Reversed image (Projected
from the rear of the screen or
with a mirror)
Reversed and inverted image
(Projected with a mirror)
6 66 6
6Selecting the Setup
Guide
8 88 8
8Selecting the On-screen
Display Language
Selectable items
On
OffDescription
Displaying the Setup Guide
when turning the projector on.
Not displaying the Setup
Guide.
7 77 7
7Reversing/Inverting
Projected Images
English
Deutsch
Español
Nederlands
Français
Italiano
Svenska
Português
4 44 4
4Setting the On-screen
Display
Menu operation n Page 40
Selectable
items
On
OffDescription
All On-screen Displays are displayed.
INPUT/VOLUME/AV MUTE/FREEZE/
AUTO SYNC/RESIZE/PICTURE MODE/
“An invalid button has been pressed.”
are not displayed.
5 55 5
5Selecting the Background
Image
Selectable items
Logo
Blue
NoneDescription
Sharp logo screen
Blue screen
—
See page 19 for details of Projection (PRJ) Mode.
XG-MB67XL_EN_CD_j06.9.11, 6:50 AM 45 
						

							46
Adjusting the Projector Function (“PRJ - ADJ” menu)
Auto Search
Auto Sync
Auto Power Off
System Sound
System Lock
h On On
On
On
SEL./ADJ. ENTER END0 Lamp Timer(Life) 100% Pict. SCRPRJ - ADJNet. Help
Speaker On
RS-232C 9600 bpsFan Mode NormalDisable
1 11 1
1 Auto Search Function
This function automatically searches for and
switches to the input mode in which signals are
being received, when the projector is turned on,
or when the INPUT button is pressed.
When “Auto Search” is set to “On”
• If two or more input signals are found, the pro-
jector selects the input source in the order of
INPUT 1 n INPUT 2 n INPUT 3 n INPUT 4
when you press INPUT (P/R) on the projector.
• While “Auto Search” is set to “On”, press
CINPUT 1,CINPUT 2, DINPUT 3 or
EINPUT 4 on the remote control to select
an input mode other than the input mode se-
lected by the projector.
Note
2 22 2
2Auto Sync (Auto Sync
Adjustment)
Menu operation n Page 40
• Auto Sync adjustment is also performed by
pressing F AUTO SYNC on the remote con-
trol.
• The Auto Sync adjustment may take some time
to complete, depending on the image of the
computer connected to the projector.
• When the optimum image cannot be achieved
with Auto Sync adjustment, use manual ad-
justments. (See page 51.)
Note
Selectable items
On
OffDescription
Auto Sync adjustment will
occur when the projector is
turned on or when the input
signals are switched, when
connected to a computer.
Auto Sync adjustment is not
automatically performed.
• When the Auto Power Off function is set to
“On”, 5 minutes before the projector enters
standby mode, the message “Enter STANDBY
mode in X min.” will appear on the screen to
indicate the remaining minutes.
Selectable
items
On
OffDescription
When no input signal is detected for
more than 15 minutes, the projector will
automatically enter standby mode.
The Auto Power Off function will be
disabled.
Note
3 33 3
3Auto Power Off
Function
5 55 5
5 Speaker Setting
Selectable
items
On
OffDescription
The audio signal is output from the
internal speaker.
The audio signal is not output from the
internal speaker.
4 44 4
4Setting the Confirmation
Sound (System Sound)
Selectable
items
On
OffDescription
A confirmation sound is made when
the projector turns on/off.
No confirmation sound is made.
XG-MB67XL_EN_CD_j06.9.11, 6:50 AM 46