Sharp Xg Ph70x N Projector User Manual
Here you can view all the pages of manual Sharp Xg Ph70x N Projector User Manual. The Sharp manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 71
Useful Features -69 Special Mode Setting Ordinarily, the type of input signal is detected and the correct resolution mode is automatically se- lected. However, for some signals, the optimal resolution mode in “Special Modes” on the “Fine Sync” menu may need to be selected to match the computer display mode. Menu operation Page 58 Example: “Fine Sync” screen menu for INPUT 1 (RGB) mode Note • If your computer displays patterns which repeat ev ery other line (horizontal stripes), flickering may occur...
Page 72
-70 Auto Sync Adjustment Used to automatically adjust a computer image. Menu operation Page 58 Example: “Fine Sync” screen menu for INPUT 1 (RGB) mode Description of Auto Sync Adjustment Note •A uto Sync adjustment is also performed by pressing on the projector or on the remote control. • The Auto Sync adjustment may take some time to complete, depending on the image of the computer connected to the projector. • When the optimum image cannot be achieved with Auto Sync adjustment, use manual...
Page 73
Useful Features -71 Auto Sync Display Function Used to set the display during Auto Sync. Menu operation Page 56 Example: “Fine Sync” screen menu for INPUT 1 (RGB) mode Description of Auto Sync Display Description The image set as a background image is projected. See page 77. The computer image being adjusted is displayed. Selectable items —
Page 74
-72 You can adjust the projector’s audio to your preferences using the “Audio” menu. A udio Adjustment (“Audio” menu) Adjusting the Audio This function allows you to adjust the projector’s audio. Menu operation Page 56 Example: “Audio” screen menu Description of Adjustment Items Selectable itemsPress \ Press | Note •To reset all adjustment items, select “Reset” and press . Increased audio from the right speakerFor stronger treble For stronger bass Balance T reble Bass Increased audio fromthe left...
Page 75
Useful Features -73 Speaker Setting This function allows you to turn the audio out- put of the internal speaker on or off when the projector is connected to an external amplifier. Menu operation Page 56 Example: “Audio” screen menu Description of Speaker Settings Selectable items ON OFF Description The audio signal is output from the internalspeaker. The audio signal is not output from the internal speaker.
Page 76
-74 Using the “Options (1)” Menu You can use the “Options (1)” menu to enhance the usage for the projector. Displaying Dual Pictures (Pict in Pict ) The Pict in Pict (picture in picture) function allows you to display two pictures on the same screen. You can display the image input from INPUT 4 or 5 as an inset picture over- lapping the main picture input from INPUT 1, 2 or 3. Menu operation Page 56 Example: “Options (1)” screen menu for INPUT 1 (RGB) mode Note •You can press on the projector or ,...
Page 77
Useful Features -75 Shifting the Projected Im- age Vertically (Digital Shift) For easier viewing, this function shifts the im- age projected on the screen up or down elimi- nating either the upper or lower black band found in 16:9 and other wide aspect ratios. Menu operation Page 56 Example: “Options (1)” screen menu for INPUT 1 (RGB) mode Description of Digital Shift Note •The “Digital Shift” function works with the “NORMAL”, “BORDER”, “STRETCH” or “SMART STRETCH” image. (See page 49.) Press \...
Page 78
-76 Using the “Options (1)” Menu Setting the Video System The video input system mode is factory preset to “Auto”; however, a clear picture from the con- nected audio-visual equipment may not be re- ceived, depending on the video signal difference. In that case, switch the video signal. Menu operation Page 58 Example: “Options (1)” screen menu for INPUT 4 (video) mode Description of Video Systems Note • The video signal can only be set in INPUT 4 or INPUT 5 mode. • When “Video System” is set to “Auto”,...
Page 79
Useful Features -77 Selecting the Background Image Menu operation Page 58 Example: “Options (1)” screen menu for INPUT 1 (RGB) mode Description of Background Images Note • You can set a captured image as a background image by selecting “Custom”. • When “Custom” is selected, an image saved us- ing “Image Capture” can be displayed as a back- ground image. Selectable items Logo Custom Blue None Description Default image User customized image (e.g. company logo) Blue screen Black screen Selecting the...
Page 80
-78 Using the “Options (1)” Menu Eco Mode Menu operation Page 56 Example: “Options (1)” screen menu for INPUT 1 (RGB) mode Description of Eco Mode * This is a reference value and is not guaranteed. Note • When “Eco Mode” is set to “ON”, the power con- sumption will decrease and the lamp life will extend. (Projection brightness decreases ap- proximately 14%.) Brightness Approx. 86% 100% Selectable items ON OFF Power consumption (When using AC 100V) Approx. 570 W 650 W Lamp life Approx. 2,500 hours*...