Sharp Xg Ph70x N Projector Quickstart Guide

-51
Resetting the Lamp Timer of the Projector via LAN
5Click “Properties” on the “File”
menu.
6Click the “Settings” tab, and
then click “ASCII Setup”.
7Select the check boxes next to
“Send line ends with line feeds”,
“Echo typed characters locally”,
and “Append line feeds to in-
coming line ends”, and click
“OK”.
•The LAMPRESET Properties window
appears, click “OK”.
8If a user name and/or password
is set for the projector, enter the
user name and password.
9Send the lamp reset command.
“LPRE0001” for...

-52
Communication cannot be established with the projector
When connecting the projector using serial-connection
\Check that the RS-232C terminal of the projector and a computer or the commercially
available controller are connected correctly.
\ Check that the RS-232C cable is a cross-over cable.
\ Check that the RS-232C port setting for the projector corresponds to the setting for the
computer or the commercially available controller.
When connecting the projector to a computer using network (LAN)-...

-53
Troubleshooting
\Take the following steps for checking the network settings for the comput\
er.
1. Open a command prompt (MS-DOS Prompt).
•In the case of Windows
® 98 or 98SE: click “start”  ➔ “Programs”  ➔ “MS-DOS Prompt” in
order.
• In the case of Windows
® Me: click “start”  ➔ “Programs”  ➔ “Accessories”  ➔ “MS-DOS
Prompt” in order.
• In the case of Windows
® 2000: click “start”  ➔ “Programs”  ➔ “Accessories”  ➔ “Command
Prompt” in order.
• In the case of Windows
® XP: click “start”  ➔ “All...

-54
\Check if the “TCP/IP” protocol is operating correctly using the “PING” command. Also, check
if an IP address is set.
1. Open a command prompt (MS-DOS Prompt).
•In the case of Windows
® 98 or 98SE: click “start”  ➔ “Programs”  ➔ “MS-DOS Prompt” in
order.
• In the case of Windows
® Me: click “start”  ➔ “Programs”  ➔ “Accessories”  ➔ “MS-DOS
Prompt” in order.
• In the case of Windows
® 2000: click “start”  ➔ “Programs”  ➔ “Accessories”  ➔ “Command
Prompt” in order.
• In the case of Windows
® XP: click...

-55
Dimensions
Units: inches (mm)
16 5/32 (410)
4
 11/32 (110.1)
3
  3/4 (94.9)
7
 1/16 (179)
7  1/16 (179)
3 23/64 (85)
9 39/64 (243.9)
13
 5/8 (346)
5 47/64 (145.5)45/64 (17.5)
7 3/32 (180)
3 55/64 (97.8)
3
  23/32 (94.3)
31/64 (12.1)
18
 35/64 (471)
M43 
3/64(77.27)
M4M4
Side ViewSide ViewTop View
Rear View
Front View
Bottom View 

-56
Dimensions
Projector and Lens Dimensions
[When AN-PH10EX is installed]
[When AN-PH20EZ is installed]
[When AN-PH31EZ is installed]
18 35/64 (471)
3 
17/32(89.31)
Lower position
3 1/4
 (82.16)13 1/8 (333)
Mount base position
Move
out
11/64 
(4.2)
18  35/64 (471)
1 
21/64(33.51)
13
 1/8 (333)
Mount base position Lower position
3 
1/4
 (82.16)
Move
out
1/16 
(1.2)
  
LENS HOOD LENS TRIM
Lower position
3  1/4
 (82.16)
18 35/64 (471)
17 (431.7)
Move out
1/16 (1.5)
13
 1/8 (333)
Mount base position
[When...