Sharp Xg Ph50x Projector User Manual

Useful Features
-67
Overview of All Color Set-
tings
This function allows you to confirm the settings
of all the colors.
Menu operation  Page  56
Example: “C.M.S.” screen menu 

-68
You can adjust the computer image, match the computer display mode, and confirm the
input signal using the “Fine Sync” menu.
Computer Image Adjustment (“Fine Sync” menu)
Adjusting the Computer
Image
Use the Fine Sync function in case of irregulari-
ties such as vertical stripes or flickering in por-
tions of the screen.
Menu operation  Page  56
Example: “Fine Sync”  screen menu for
INPUT 1 (RGB) mode
Description of Adjustment Items
Note
• You can automatically adjust the computer im-
age by setting...

Useful Features
-69
Special Mode Setting
Ordinarily, the type of input signal is detected and
the correct resolution mode is automatically se-
lected. However, for some signals, the optimal
resolution mode in “Special Modes” on the “Fine
Sync” menu may need to be selected to match
the computer display mode.
Menu operation  Page 58
Example: “Fine Sync”  screen menu for
INPUT 1 (RGB) mode
Note
• If your computer displays patterns which repeat
ev ery other line (horizontal stripes), flickering
may occur...

-70
Auto Sync Adjustment
Used to automatically adjust a computer image.
Menu operation  Page 58
Example: “Fine Sync”  screen menu for
INPUT 1 (RGB) mode
Description of  Auto Sync  Adjustment
Note
• A uto Sync adjustment is also performed by
pressing 
  on the projector or  on the
remote control.
• The Auto Sync adjustment may take some time
to complete, depending on the image of the
computer connected to the projector.
• When the optimum image cannot be achieved
with Auto Sync adjustment, use manual...

Useful Features
-71
Auto Sync Display Function
Used to set the display during Auto Sync.
Menu operation  Page 56
Example: “Fine Sync” screen menu for
INPUT 1 (RGB) mode
Description of Auto Sync Display
Description
The image set as a background image
is projected. See page  77.
The computer image being adjusted is
displayed.
Selectable items
— 

-72
You can adjust the projector’s audio to your preferences using the “Audio” menu.
A udio Adjustment (“Audio” menu)
Adjusting the Audio
This function allows you to adjust the projector’s
audio.
Menu operation  Page  56
Example: “Audio” screen menu
Description of Adjustment Items
Selectable itemsPress  \ Press |
Note
•To  reset all adjustment items, select “Reset” and
press 
.
Increased audio from
the right speakerFor stronger treble
For stronger bass
Balance
T reble
Bass Increased audio fromthe left...

Useful Features
-73
Speaker Setting
This function allows you to turn the audio out-
put of the internal speaker on or off when the
projector is connected to an external amplifier.
Menu operation  Page 56
Example: “Audio” screen menu
Description of Speaker Settings
Selectable items
ON
OFF Description
The audio signal is output from the internalspeaker.
The audio signal is not output from the
internal speaker. 

-74
Using the “Options (1)” Menu
You can use the “Options (1)” menu to enhance the usage for the projector.
Displaying Dual Pictures
(Pict in Pict )
The Pict in Pict (picture in picture) function allows you to
display two pictures on the same screen. You can display
the image input from INPUT 4 or 5 as an inset picture over-
lapping the main picture input from INPUT 1, 2 or 3.
Menu operation  Page 56
Example: “Options (1)” screen menu for
INPUT 1 (RGB) mode
Note
•Inset picture can only be displayed in...

Useful Features
-75
Shifting the Projected Im-
age Vertically (Digital
Shift)
For easier viewing, this function shifts the im-
age projected on the screen up or down elimi-
nating either the upper or lower black band found
in 16:9 and other wide aspect ratios.
Menu operation  Page 56
Example: “Options (1)” screen menu for
INPUT 1 (RGB) mode
Description of Digital Shift
Note
• The “Digital Shift” function works with the “BOR-
DER”, “STRETCH” or “SMART STRETCH” im-
age. (See page  49.)
Press  \
Shifts the...

-76
Using the “Options (1)” Menu
Setting the Video System
The video input system mode is factory preset
to “Auto”; however, a clear picture from the con-
nected audio-visual equipment may not be re-
ceived, depending on the video signal difference.
In that case, switch the video signal.
Menu operation  Page 58
Example: “Options (1)” screen menu for
INPUT 4 (video) mode
Description of Video Systems
Note
• The video signal can only be set in INPUT 4 or
INPUT 5 mode.
• When “Video System” is set to “Auto”,...