Sharp Xg P610x Projector User Manual

							Appendix
-79
Troubleshooting
Check
•Projector power cord is not plugged into the wall outlet.
•Po wer to the external connected devices is off.
• The selected input mode is wrong.
•Cables are incorrectly connected to the projector.
•Remote control batteries have run out.
•
External output has not been set when connecting notebook computer.
•When the connected DVI digital equipment is turned on before the
“DVI” input mode is selected on the projector, the image may not be
projected properly or may not be displayed at all. Ensure that the
appropriate input mode has been selected and set the input signal type
on the projector before you turn on the connected equipment.
•Is the lens cover correctly attached?
•Is the filter cover correctly attached?
•Is the lamp unit cover correctly attached?
• Cables are incorrectly connected to the projector.
•“Bright” is set to minimum position.
• The “Shutter” is closed.
•Image adjustments are incorrectly set.
(COMPUTER 1/2, DVI, HDMI only)
• Input signal type (RGB/Component) is incorrectly set.
(VIDEO, S-VIDEO only)
• Video Input system is incorrectly set.
•Adjust the focus.
• The projection distance exceeds the focus range.
• When an optional lens is attached, refer to the operation
manual of the lens.
•
There is fog on the lens. If the projector is carried from a cold
room into a warm room, or if it is suddenly heated, condensation
may form on the surface of the lens and the image will become
b lurred. Please set up the projector at least one hour before it is
to be used. If condensation should form, remove the power cord
from the wall outlet and wait for it to clear.
(Computer Input only)
• Perform “Fine Sync” Adjustments. (“Clock” Adjustment)
• Perform “Fine Sync” Adjustments. (“Phase” Adjustment)
• Tu rn off the LCD display of the notebook computer.
•Noise may appear depending on the computer.
•The “DNR” (Digital Noise Reduction) setting is not correct.
•Cables are incorrectly connected to the projector.
•Volume is set to minimum.
• The “MUTE” function is working.
• The “Speaker” menu is set to “Off ”.
ProblemPage
28
—
36
24 –27
16
24
78
68
73
24 –27
49
41
49
51
57
31
22
—
53
53
76 —
50
24 –27
36
37
55
Sound is heard but no picture appears.
Color is faded or poor.
Picture is blurred;noise appears.
Picture appears but no sound is heard.
No picture and no sound
or projector does not star t. 
						

							-80
CheckProblemPage
An unusual sound is
occasionally heard
from the cabinet.
Maintenance
indicator illuminates or
blinks in red.
The projector cannot be
turned on or put into the
standby mode using the
ON or STANDBY button
on the projector.
All buttons on the
projector and the remote
control are unavailable.
Picture is green on
COMPUTER 1or 2
(COMPONENT).
Picture is pink (no green)
on COMPUTER 1/ 2 or
DVI (RGB).
The black levels of the
image show banding or
appear faded when DVI
or HDMI is selected.
Picture is too bright and
whitish.
The cooling fan
becomes noisy.
The lamp does not light
up even after the
projector turns on.
The lamp suddenly turns
off during projection.
The image sometimes
flickers.
The lamps take a long
time to turn on.
Picture is dark.
The remote control
cannot be used.•If the picture is normal, the sound is due to cabinet shrinkage
caused by room temperature changes. This will not affect
operation or performance.
•See “Maintenance Indicators”.
•If the “Keylock Level” menu is set to “Level A” or “Level B”, all or
specific buttons on the projector are unavailable. Use the
remote control to operate the projector.
•If the “Stack Setting” menu is set to “Slave” and the “Keylock
Level” menu is set to “Level B”, all buttons on the projector and
the remote control are unavailable. Connect the remote control
to the projector, and then use the remote control to operate the
projector.
•Change the input signal type setting.
•Make adjustments that result in the best picture quality in the
“Dynamic Range” setting.
•Image adjustments are incorrectly set.
•When temperature inside the projector increases, the cooling
fan runs faster.
•The lamp indicator is illuminating in red.
Replace the lamp.
•Cables are incorrectly connected to the projector or the
connected equipment works improperly.
•If this happens frequently, replace the lamp.
•The lamps will eventually need to be changed.
The lamps have reached the end of its life. Replace the lamps.
•Operate the remote control while pointing it at the projector’s
remote control sensor.
•The remote control may be too far away from the projector.
•If direct sunlight or a strong fluorescent light is shining on the
projector’s remote control sensor, place the projector where it
will not be affected by strong light.
•Is a ø3.5 mm minijack cable plugged into the WIRED REMOTE
terminal?
•The batteries may be depleted or inserted incorrectly. Make
sure the batteries are inserted correctly or insert new ones.—
69
63
17
62
63
51
51
49
9, 10
66, 69, 70
69
24–27
72
72
16
16
This projector is equipped with a microprocessor. Its performance could be adversely affected by incorrect op-
eration or interference. If this should happen, unplug the projector and plug it in again after more than 5 minutes.
Troubleshooting 
						

							Appendix
-81
For SHARP Assistance
If you encounter any problems during setup or operation of this projector, first refer to the
“Troubleshooting” section on pages 79 and 80. If this operation manual does not answer
your question, please contact the SHARP Service departments listed below.
U.S.A. Sharp Electronics Corporation
1-888-GO-SHARP (1-888-467-4277)
[email protected]
http://www.sharpusa.com
Canada Sharp Electronics of Canada Ltd.
(905) 568-7140
http://www.sharp.ca
Mexico Sharp Electronics Corporation Mexico
Branch
(525) 716-9000
http://www.sharp.com.mx
Latin America Sharp Electronics Corp. Latin American
Group
(305) 264-2277
[email protected]
http://www.siempresharp.com
Germany Sharp Electronics (Europe) GMBH
01805-234675
http://www.sharp.de
U.K. Sharp Electronics (U.K.) Ltd.
08705 274277
http://www.sharp.co.uk/customersupport
Italy Sharp Electronics (Italy) S.P.A.
(39) 02-89595-1
http://www.sharp.it
France Sharp Electronics France
01 49 90 35 40
[email protected]
http://www.sharp.fr
Spain Sharp Electronica Espana, S.A.
93 5819700
[email protected]
http://www.sharp.es
Switzerland Sharp Electronics (Schweiz) AG
0041 1 846 63 11
[email protected]
http://www.sharp.ch
Sweden Sharp Electronics ( Nordic ) AB
(46) 8 6343600
[email protected]
http://www.sharp.se
Austria Sharp Electronics (Europe) GMBH
Branch Office Austria
0043 1 727 19 123
[email protected]
http://www.sharp.atBenelux SHARP Electronics Benelux BV
0900-SHARPCE (0900-7427723)
Nederland
9900-0159 Belgium
http://www.sharp.nl
http://www.sharp.be
http://www.sharp.lu
Australia Sharp Corporation of Australia
Pty. Ltd.
1300-135-022
http://www.sharp.net.au
New Zealand Sharp Corporation of New Zealand
Phone:(09) 573-0111
Fax:(09) 573-0112
http://www.sharp.net.nz
Singapore Sharp-Roxy Sales (S) Pte. Ltd.
65-226-6556
[email protected]
http://www.sharp.com.sg
Hong Kong Sharp-Roxy (HK) Ltd.
(852) 2410-2623
[email protected]
http://www.sharp.com.hk
Taiwan Sharp Corporation (Taiwan)
0800-025111
http://www.sharp-scot.com.tw
Malaysia Sharp-Roxy Sales & Service Co.
(60) 3-5125678
U.A.E. Sharp Middle East Fze
971-4-81-5311
[email protected]
Thailand Sharp Thebnakorn Co. Ltd.
02-236-0170
[email protected]
http://www.sharp-th.com
Korea Sharp Electronics Incorporated of
Korea
(82) 2-3660-2002
[email protected]
http://www.sharpkorea.co.kr
India Sharp Business Systems (India)
Limited
(91) 11- 6431313
[email protected] 
						

							-82
Specifications
Model
Display devices
Resolution
Lens
(Standard)
Lens shift
Input terminals
Output terminals
Speakers
Projection lamp
Rated voltage
Rated frequency
Input current
Power consumption (Standby)
Operation temperature
Cabinet
Dimensions (main body only) [W × H × D]
Weight (approx.)F number
Zoom
Focus
HDMI
DVI-D (Compatible with HDCP)
Computer / Component (5BNC)
Computer/Component 
(mini D-sub 15 pin)
S-Video (mini DIN 4 pin)
Video (RCA)
Audio (ø3.5 mm stereo minijack)
Audio (RCA)
Computer/Component 
(mini D-sub 15 pin)
Audio (ø3.5 mm stereo minijack)
LAN (RJ-45)
RS-232C (mini DIN 9 pin)
Wired Remote  
(ø3.5mm stereo minijack)XG-P610X (Standard zoom lens attached) / 
XG-P610X-N (No lens attached)
0.7 DLP
® Chip ×3
XGA (1024 × 768)
F 2.5
Power, ×1.25 (f = 25.5 – 32.0 mm)
Power
Power (V : ±55% / H : ±35%)
×1
×1
×1
×1
×1
×1
×3
×2 (L/R)
×1
×1 (variable audio output)
×1
×1
×1
3 W × 2 (Stereo)
280 W × 2 lamps
AC 100 – 240 V
50/60 Hz
7.7 A
755 W (16.7 W) with AC 100 V
710 W (16.9 W) with AC 240 V
41°F to 104°F (+5°C to +40°C)
Plastic
19 
22/32 × 25 3/32 × 7 31/64 
(500 × 637 × 190 mm)
XG-P610X: 57.4 lbs. (26.0 kg)
XG-P610X-N: 54.1 lbs. (24.5 kg) Control and 
communication 
terminals
As a part of policy of continuous improvement, SHARP reserves the right to make design
and specification changes for product improvement without prior notice. The performance
specification figures indicated are nominal values of production units. There may be some
deviations from these values in individual units. 
						

							Appendix
-83
AC socket....................................................................... 28
ADJ./MOUSE switch...................................................... 17
Adjustment buttons........................................................ 47
Adjustment feet.............................................................. 30
Advanced intelligent compression................................ 75
All Reset........................................................................ 65
Area zoom..................................................................... 40
Aspect ratio.................................................................... 39
Audio.............................................................................. 55
Audio Out....................................................................... 55
Auto Power Off............................................................... 58
Auto Restart................................................................... 63
Auto Search................................................................... 58
Auto Sync (Auto Sync adjustment)............................... 54
AUTO SYNC button....................................................... 54
Auto Sync Disp.............................................................. 54
Background.................................................................... 58
Border............................................................................ 39
BREAK TIMER  button................................................... 41
C.M.S. (Color Management System)............................ 52
C.M.S. Adjustment......................................................... 52
Carrying handle............................................................. 14
Clock.............................................................................. 53
CLR Temp  (Color Temperature).................................... 50
COMPUTER1 button..................................................... 36
COMPUTER2 button..................................................... 36
COMPUTER/COMPONENT1 terminals....................... 24
COMPUTER/COMPONENT2 terminals....................... 24
DHCP Client.................................................................. 64
Digi. Shift........................................................................ 57
DNR............................................................................... 50
Dot By Dot..................................................................... 39
Dustproof cap................................................................ 13
DVI button...................................................................... 36
DVI-D terminals............................................................. 24
Eco Mode....................................................................... 58
ENTER button................................................................ 47
Exhaust vent.................................................................. 66
Fan Mode....................................................................... 63
Filter cover..................................................................... 67
Fine Sync....................................................................... 53
FOCUS buttons............................................................. 31
FREEZE button............................................................. 38
Gateway......................................................................... 65
Geometric adjustment................................................... 33
H-Pos............................................................................. 53
H & V keystone.............................................................. 34
H & V LENS SHIFT button............................................ 30
HDMI button................................................................... 36
HDMI terminal................................................................ 24
Image Capture............................................................... 57
Image resizing............................................................... 35
INPUT buttons............................................................... 36
Intake vent..................................................................... 66
IP Address..................................................................... 65
Kensington Security Standard connector..................... 14
Keycode......................................................................... 59
Keylock Level................................................................. 63
KEYSTONE button........................................................ 32
Keystone Correction...................................................... 32
Lamp.............................................................................. 71
Lamp indicators 1, 2...................................................... 69
Lamp Mode.................................................................... 62
Lamp Timer  (Life) ..........................................................65
Lamp unit cover............................................................. 72
LAN terminal.................................................................. 27
LAN/RS232C................................................................. 64
Language....................................................................... 65
Index
L-CLICK button.............................................................. 18
Lens cover..................................................................... 77
MAGNIFY buttons.......................................................... 37
MENU button................................................................. 47
Monitor Out.................................................................... 64
MONITOR OUT terminals............................................. 26
Mouse button................................................................. 18
MUTE button.................................................................. 37
Network.......................................................................... 64
Normal........................................................................... 39
ON button...................................................................... 28
Options 1....................................................................... 56
Options 2....................................................................... 61
OSD Display.................................................................. 57
Pair Stack....................................................................... 63
Password ....................................................................... 61
Phase............................................................................. 53
Pict in Pict...................................................................... 56
Picture............................................................................ 49
Picture Mode................................................................. 49
PICTURE MODE button................................................ 38
Power cord..................................................................... 28
Power indicator.............................................................. 69
PRJ Mode ...................................................................... 62
Progressive.................................................................... 50
R-CLICK button............................................................. 18
Remote control.............................................................. 16
Remote control sensor.................................................. 16
Remote receiver............................................................ 18
Resize............................................................................ 39
RESIZE button............................................................... 39
Resolution...................................................................... 53
RGB cable..................................................................... 24
RS-232C........................................................................ 64
RS-232C terminal.......................................................... 27
S-VIDEO button............................................................. 36
S-VIDEO terminals........................................................ 26
Save Setting.................................................................. 53
Select Setting................................................................ 53
Service Mode................................................................. 65
Set Inputs....................................................................... 63
SHUTTER buttons......................................................... 41
Signal Info...................................................................... 54
Signal Type.................................................................... 51
Smart Stretch................................................................ 40
Speaker.......................................................................... 55
sRGB............................................................................. 52
Stack Setting................................................................. 62
STANDBY button........................................................... 28
Startup Image................................................................ 58
Status............................................................................. 65
Stretch........................................................................... 39
Subnet Mask.................................................................. 65
System Lock.................................................................. 59
TCP/IP........................................................................... 65
Temperature warning indicator...................................... 69
UNDO button................................................................. 47
V-Pos.............................................................................. 53
V-stretch......................................................................... 40
VIDEO button................................................................. 36
VIDEO terminals............................................................ 26
Video System................................................................ 57
Volume buttons.............................................................. 36
WIRED R/C JACK .........................................................17
WIRED REMOTE terminal............................................ 17
ZOOM buttons............................................................... 31 
						

							SHARP CORPORATION