Sharp Xg P610x Projector User Manual

Useful Features
-49
Picture Adjustment (“Picture” menu)
1 11 1
1 Selecting the Picture Mode
This function allows you to select the picture
mode in accordance with brightness of the room
or content of the image to be projected.
In all picture modes, items on the “Picture” menu
can be adjusted and saved.
Note
•You can also press PICTURE MODE on the re-
mote control to select the picture mode. (See
page 38.)
2 22 2
2 Adjusting the Image
Select a picture mode before adjusting the im-
age.
*1 “Color”, “Tint”,...

-50
3 33 3
3 Adjusting the Color Temperature
Note
•“CLR Temp” cannot be set when “C.M.S. Ad-
justment” on the “C.M.S.” menu is set to “sRGB”.
(See page 52.)
4 44 4
4 Selecting the Progressive Mode
*The film source is a digital video recording with the original
encoded as is at 24 frames/second. The projector can con-
vert this film source to progressive video at 60 frames/sec-
ond with NTSC and PAL60Hz or at 50 frames/second with
PAL50Hz and SECAM to play back a high-definition image.
Note
•In NTSC or...

Useful Features
-51
Description
Automatically selects the appropriate
input signal between RGB and Compo-
nent.Set when RGB signals are received.
Set when component signals are
received.
Selectable items
Auto
RGB
Component
Description
Set when digital PC RGB signals are
received from the computer.
Set when digital PC component signals
are received from the computer.
Set when digital video RGB signals are
received from video equipment.Set when digital video component signals
are received from video...

-52
Color Management System (“C. M. S.” menu)
1 11 1
1Selecting the Color
Reproduction Mode
This function allows you to select the color re-
production mode for the projected images.
Note
•sRGB is an international standard of color repro-
duction regulated by the IEC (International
Electrotechnical Commission). As the fixed color
area has been decided by the IEC, the images are
displayed in a natural tint based on an original im-
age, when “C.M.S. Adjustment” is set to “sRGB”.
•You cannot set “Color”,...

Useful Features
-53
Computer Image Adjustment (“Fine Sync” menu)
1 11 1
1 Adjusting the Computer
Image
Use the Fine Sync function in case of irregulari-
ties such as vertical stripes or flickering in por-
tions of the screen.
Note
•You can automatically adjust the computer im-
age by setting “Auto Sync” on the “Fine Sync”
menu to “Normal” or “High Speed”, or by press-
ing AUTO SYNC on the projector or on the re-
mote control. See page 54 for details.
•To reset all adjustment items, select “Reset” and...

-54
5 55 5
5 Checking the Input Signal
You can check the input signal information.
6 66 6
6 Auto Sync Adjustment
Used to automatically adjust a computer image.
Note
•Auto Sync adjustment is also performed by
pressing AUTO SYNC on the projector or on
the remote control.
•The Auto Sync adjustment may take some time
to complete, depending on the image of the
computer connected to the projector.
•When the optimum image cannot be achieved
with Auto Sync adjustment, use manual adjust-
ments. (See page 53.)...

Useful Features
-55
Audio Adjustment (“Audio” menu)
1 11 1
1 Adjusting the Audio
This function allows you to adjust the projector’s
audio.
Note
•To reset all adjustment items, select “Reset” and
press ENTER.
2 22 2
2 Setting the Audio Output Type
This function determines whether the audio level
output from the AUDIO OUTPUT terminal is fixed
or variable by linking with VOLUME.
Info
•When “Audio Out” has been set to “VAO”, first
make sure to lower the volume of the projector
before turning the power on or...

-56
Using the “Options 1” Menu
1 11 1
1 Displaying Dual Pictures
(Pict in Pict)
The Pict in Pict (picture in picture) function al-
lows you to display two pictures on the same
screen. You can display the image input from
VIDEO or S-VIDEO as an inset picture overlap-
ping the main picture input from COMPUTER1/2,
DVI or HDMI.
Note
•You can press ' / " / \ / | on the projector or
on the remote control to change the location of
the inset picture image.
(The inset picture frame will be displayed. To...

Useful Features
-57
5 55 5
5 Setting the Video System
The video input system mode is factory preset
to “Auto”; however, a clear picture from the con-
nected audio-visual equipment may not be re-
ceived, depending on the video signal difference.
In that case, switch the video signal.
Note
•The video signal can only be set in VIDEO or
S-VIDEO mode.
•When “Video System” is set to “Auto”, you may
not receive a clear picture due to signal differ-
ences. Should this occur, switch to the video
system of the...

-58
Using the “Options 1” Menu
7
7 7
7
7 Selecting the Background
Image
Note
• When “Custom” is selected, an image saved us-
ing “Image Capture” can be displayed as a back-
ground image.
8
8 8
8
8Selecting the Startup Image
Note
• When “Custom” is selected, an image saved
using “Image Capture” can be displayed as a
startup image.
9
9 9
9
9 Setting the Eco Mode
When the two lamps are lit at the same time
* This is a reference value and is not guaranteed.
Note
•When “Eco Mode” is set to “On”, the power...