Sharp Xg P25x Projector User Manual
Have a look at the manual Sharp Xg P25x Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 615 Sharp manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
E-48 Basic Operation • When the system mode is set to “Auto”, you may not receive a clear picture due to signal differences. Should this occur, switch to the video system of the source signal. • AUTO cannot be set for PAL-M and PAL-N input signals. Select “PAL-M” or “PAL-N” in “Video System” menu for PAL-M and PAL-N input signals. Setting the Video Signal (VIDEO menu only) The video input system mode is preset to “Auto”; however, it can be changed to a specific system mode if the selected system mode is not compatible with the connected audiovisual equipment. See page 38 for the procedure details. Turning On/Off the On-screen Display Description All On-screen Display are displayed. Input/Custom/Freeze/Enlarge/Auto sync/Volume/Mute/ Black screen functions are not displayed. All On-screen Display are not displayed (except Menu/ Lens functions and warning display (Power off/Temp./ Lamp function etc.)). Selected item Normal Level A Level B This function allows you to turn on or off the on-screen messages that appear during input select. See page 38 for the procedure details. XG-P25X/CD (E)-d02.3.19, 7:08 PM 48
E-49 Basic Operation Selecting a Background Image Selected item Sharp Custom Blue NoneDescription SHARP default image User customized image (e.g. company logo) Blue screen Black screen • By selecting “Custom”, the projector can display a custom image (e.g. your company logo) as the background image. The custom image must be a 256-color BMP file with a picture size no larger than 1,024 768 pixels. Please see the Sharp Advanced Presentation Software operation manual on the CD-ROM for how to save (or change) a custom image. Selecting a Startup Image • By selecting “Custom”, the projector can display a custom image (e.g. your company logo) as the startup image. The custom image must be a 256-color BMP file with a picture size no larger than 1,024 768 pixels. Please see the Sharp Advanced Presentation Software operation manual on the CD-ROM for how to save (or change) a custom image. Description SHARP default image User customized image (e.g. company logo) Black screenSelected item Sharp Custom None This function allows you to select the image displayed when no signal is being sent to the projector. See page38 for the procedure details. This function allows you to specify the image to be displayed upon the projector’s startup. A custom image (e.g. your company logo) can be uploaded to the projector via an RS-232C cable. See page 19 in this operation manual, and also the supplied Sharp Advanced Presentation Software operation manual on the CD-ROM for detailed instructions. See page 38 for the procedure details. XG-P25X/CD (E)-d02.3.19, 7:08 PM 49
E-50 Basic Operation These functions allow you to reduce the power consumption when the projector is in standby mode. See page 38 for the procedure details. Power Save FunctionFunction to control the quantity of projected light. Select “Low Power Mode” or “Standard Mode” to decrease or increase brightness and power consumption. Selecting the Economy Mode Quantity of light is 80%. Power consumption is 330W. Quantity of light is 100%. Power consumption is 380W. • “Power Save” mode is factory preset to “(Standard Mode)”. • When selecting “ (Standard Mode)” in “Power Save Mode”, fan noise increases. • Even when selecting “ (Low Power Mode)” in “Power Save Mode”, fan noise may increase if internal temperature rises enough to activate the cooling function. Monitor Out/RS-232C Off FunctionThis projector consumes power when using a monitor connected to the OUTPUT port for INPUT 1, 2 and a computer connected to the RS-232C port. When not using these ports, “MNTR Out/RS232C” can be set to “” to reduce standby power consumption. • “MNTR Out/RS232C” is factory preset to “”, and “Auto Power Off” is factory preset to “”. Standby power for Monitor Out/RS-232C connection turned off. Monitor Out/RS-232C on CAUTION• Set “MNTR Out/RS232C” to “” when using the Sharp Advanced Presentation Software (supplied). Automatic Power Shutoff FunctionWhen no input signal is detected for more than 15 minutes, the projector will automatically shut off. The on-screen message, “Power OFF in 5 min.” will appear five minutes before the power is automatically turned off. Power automatically shuts off after about 15 minutes of no signal input. Automatic Power Shutoff disabled. XG-P25X/CD (E)-d02.3.19, 7:08 PM 50
E-51 Basic Operation Confirming the Lamp Usage Time This function allows you to check the accumulated lamp usage time. See page 38 for the procedure details. • It is recommended that the lamp be replaced after approximately 1,400 cumulative hours of use. See pages 62 and 63 for lamp replacement. Reversing/Inverting Projected Images This projector is equipped with a reverse/invert image function which allows you to reverse or invert the projected image for various applications. See page 38 for the procedure details. Description Normal image Inverted image Reversed image Reversed and inverted imageSelected item Front CeilingFront Rear CeilingRear • This function is used for the reversed image and ceiling-mount setups. See page 30 for these setups. XG-P25X/CD (E)-e02.3.19, 7:10 PM 51
E-52 Basic Operation Setting the Stacking Mode You can double the brightness of an image by stacking two projectors and projecting same picture simultaneously. To control two projectors, assign one as the master and one as the slave. The slave projector will duplicate any operational settings made to the master projector. See page 38 for the procedure details. • When the projector is set to “Master”, button operation signals will be transmitted through RS-232C. • When the projector is set to “Slave”, operations follow the button operations sent from the “Master”. • When set to slave, all buttons on the projector along with ∂/ƒ/ß/©,ENTER,UNDO,POWER ON,POWER OFF,LENS and MENU on the remote control can be used. The slave cannot operate the other buttons on remote control. • For details on intended purpose, see pages 59 and 60. Locking the Operation Buttons on the Projector This function can be used to lock the use of certain operation buttons on the projector. The user can still operate the projector fully with the remote control. See page 38 for the procedure details. Description All operation buttons are functional. Only Input/Volume/Mute functions on the projector are available. All operation buttons on the projector are unavailable.Selected item Normal Level A Level B • To cancel the Keylock Level, perform the above procedure using the remote control. • See page 55 for details using the password function. XG-P25X/CD (E)-e02.3.19, 7:10 PM 52
E-53 Basic Operation Deselecting Inputs This function allows you to deselect unwanted signal input. See page 38 for the procedure details. • When stack projecting, multi-screen projecting and so on, this function can be used to cancel the RS-232C control. • Up to two input signals can be blocked for both Input 1, 2, 3 or Input 4, 5. • For details on intended purpose, see pages 59 and 60. Selecting the Transmission Speed (RS-232C) This menu allows you to adjust the transmission speed of the RS-232C connection by selecting the baud rate. See page 38 for the procedure details. • Make sure that both the projector and computer are set for the same baud rate. Refer to the computer’s operation manual for instructions for setting the baud rate. XG-P25X/CD (E)-e02.3.19, 7:11 PM 53
E-54 Basic Operation Controling Multiple Projectors with ID Numbers This projector can form a network of up to 250 projectors. To identify separately and control specified projector, you need to set ID No.. The ID No. is factory preset to “001”. See page 38 for the procedure details. Setting the ID No. Press©to select the first digit and∂/ƒto select the desired number. Continue this procedure for the remaining two digits. • Be sure to set the ID No. in the Option menu and attach a corresponding number seal to the projector. • The ID No. can be set from 001 to 250. • For details on intended purpose, see pages 57 to 60. XG-P25X/CD (E)-e02.3.19, 7:11 PM 54
E-55 Basic Operation Protecting Important Settings with a Password A password can be set by the user and used with the keylock level to prevent adjustments to certain settings on the GUI. See page 38 for the procedure details. • When password is set, you need to enter the password to use “PRJ Mode”, “Stack Setting”, “Keylock Level”, “Set Inputs”, “RS-232C” and “Set ID No.” menus. Setting the Password 1Enter the new password using∂/ƒto select the desired number, and then press©to select the next digit. Continue this procedure for the remaining three digits, and then pressENTER. 2Enter the password again (“Reconfirm”) using∂/ƒ/ß/©, and then pressENTER. • After setting the password, be sure to write it down in a secure location in case you can not remember it. Changing the Password 1Enter the old password using∂/ƒ/ß/©, and then pressENTER. 2Enter the new password using∂/ƒ/ß/©, and then pressENTER. 3Enter the password again (“Reconfirm”) using∂/ƒ/ß/©, and then pressENTER. XG-P25X/CD (E)-e02.3.19, 7:11 PM 55
E-56 Basic Operation Selecting the On-screen Display Language English is the preset language for the On-screen Display; however, this can be changed to German, Spanish, Dutch, French, Italian, Swedish, Portuguese, Chinese, Korean or Japanese. See page 38 for the procedure details. Displaying the Adjustment Settings This function can be used to display all the adjusted settings on the screen simultaneously. See page38 for the procedure details. INPUT 1, 2 (RGB) or 3 (DIGITAL) mode INPUT 4, 5 (VIDEO) mode XG-P25X/CD (E)-e02.3.19, 7:11 PM 56
E-57 Multiple Function Using Extended Functionality Features This projector has outstanding network capability. • Internet access for self-diagnosis • Multiple and group projector control • Simultaneous multiple projector control Internet access for self-diagnosis, status information and preventive maintenance This projector can be used in a network of up to 250 projectors managed from a single PC with the accompanied Sharp Advanced Presentation Software Professional Edition. This projector can be connected to a PC using an RS-232C connection. Output terminals are provided (RS-232C on the projector) enabling a daisy chain configuration and eliminating the need for a distributor. This projector is also equipped with a function to send status information (lamp usage time, etc.) to a Sharp Service Center or outside contractor for quick and efficient customer service. • For more information on these features, see the operation manuals accompanying the Sharp Advanced Presentation Software Professional Edition. Internet LAN LAN LAN E-mailE-mail XG-P25X/CD (E)-f02.3.19, 7:11 PM 57