Sharp Xg Nv6xu Projector User Manual

E-40
Useful Features
This function allows you to select the input signal type.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1Press MENU.
2Press §/© to select ÒOptionsÓ.
3Press ¶/Ä to select ÒSignal TypeÓ, and then
press©.
4Press ¶/Ä to select ÒComputer/RGBÓ or
ÒComponentÓ.
5Press ENTER to save the setting.
6To exit from the GUI, press MENU.
Selecting the Signal Type
MOUSEADJ.
5 2, 3, 4 1, 6
Projector
(GUI) On-screen Display
(Slide the MOUSE/ADJUSTMENT switch
on the...

E-41
Useful Features
(GUI) On-screen Display
Setting a Background Image
This function allows you to select the image displayed
when no signal is being sent to the projector.
Description of Background Images
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1Press MENU.
2Press §/© to select ÒOptionsÓ.
3Press ¶/Ä to select ÒBackgroundÓ, and then press
©.
4Press ¶/Ä to select the background image you want
to display on the screen.
5Press ENTER to save the setting.
6To exit from...

E-42
Useful Features
Reverse/Invert Image Function
This projector is equipped with a reverse/invert image
function which allows you to reverse or invert the pro-
jected image for various applications.
Description of Projected Images
(GUI) On-screen Display
Selected item
Front
Ceiling`Front
Rear
Ceiling`RearProjected image
Normal image
Inverted image
Reversed image
Reversed and inverted image
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1Press MENU.
2Press §/©  to select...

E-43
Useful Features
Using the Presentation Tools
Red Green Blue Yellow Orange White Black
When selecting Sharp default image
Menu Window
1
3 2, 4
This projector is equipped with presentation tools. These
will help you emphasize keypoints within your
presentation.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1Press TOOLS to display the presentation tools
menu window on the screen.
2Press ¶/Ä/§/© to select the desired tool and
color.
3Press ENTER to select it.
4Once the...

E-44
Useful Features
Status Function
This function can be used to display all the adjusted
settings on the screen simultaneously.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1Press MENU.
2Press §/© to select ÒStatusÓ.
3Press ENTER to display all the adjusted settings.
4To exit from the GUI, press MENU.
3 2 1, 4
Projector
(GUI) On-screen Display
MOUSEADJ.
2
3Remote control 

E-45
Maintenance &
Troubleshooting
Maintenance &
Troubleshooting 

E-46
Maintenance &
Troubleshooting
Air Filter Maintenance
¥ This projector is equipped with two air filters to ensure the optimal operating condition of the projector.
¥ The air filters should be cleaned every 100 hours of use. Clean the filters more often when the projector is used
in a dusty or smoky location.
¥ Have your nearest Authorized Sharp Industrial LCD Products Dealer or Service Center exchange the filter
(PFILD0080CEZZ) when it is no longer possible to clean it.
46Clean the air...

E-47
Maintenance &
Troubleshooting
Problem
¥ Blocked air intake.
¥ Clogged air filter.
¥ Cooling fan breakdown.
¥ Internal circuit failure.
¥ Burnt-out lamp.
¥ Lamp circuit failure.
¥ The bottom filter cover is
open.
Lamp/Maintenance Indicators
Maintenance Indicator
The internal
temperature is
abnormally high. TEMPERATURE
WARNING indicator
LAMP REPLACE-
MENT indicator
POWER indicatorThe lamp does not
light up.
The POWER
indicator flashes in
red when the
projector is on.Condition Possible Solution
¥...

E-48
Maintenance &
Troubleshooting
Replacing the Projection Lamp
46Remove the lamp
cage.5Replace the lamp cage
(after changing the lamp).
13Turn off the power.2Disconnect the power
cord.
Unplug the power cord from the
AC socket.
Slide the lamp cage
cover out.
Slide the lamp cage
cover in.
Slide the lamp cage cover in the
direction of the arrow. Then
fasten the user service screw. Remove the securing screws
from the lamp cage. Hold the
lamp cage by the handle and
pull it towards you.
Turn over the...

E-49
Maintenance &
Troubleshooting
Replacing the Projection Lamp
1Connect the power
cord.Reset the lamp timer.
While pressing Ä, © and
ENTER on the projector, press
POWER ON on the projector. Plug the power cord into the AC
socket of the projector.
Resetting the lamp timer
Using the Kensington Lock
This projector has a Kensington Security Standard
connector for use with a Kensington MicroSaver Security
System. Refer to the information that came with the
system for instructions on how to use it to secure...